Kentucky Pistol, .54 caliber, 8-1/2" octagon-to-round barrel, flintlock, walnut, brass, used

Home > Guns > Flintlock guns > Flintlock pistols

Kentucky Pistol,
.54 caliber, 8-1/2" octagon-to-round barrel,
flintlock, walnut, brass, used

Part Number:	AAV-577
Availability:
Price:	$2,599.00
Order Quantity:

This flint lock pistol features a .54 caliber octagon-to-round barrel with a bright well maintained bore. Stock in walnut and trimmed in brass furniture, this pistol points naturally. Perfect for your next Colonial reenactment, this handy pistol weighs 2.5 pounds.

The .54 caliber 8-1/2" octagon-to-round barrel transitions at the midpoint with a single wedding band before tapering round towards the muzzle. The bore is rifled with seven radius bottom grooves with a twist appropriate for shooting patched round balls. The bore is bright and ready to shoot. The barrel exterior is polished bright and a silver blade front is soldered 1" behind the muzzle. A flat top rear sight is dovetailed in the rounded flared tang of the breech plug.

The walnut stock has been stained to a medium brown and finished to a satin sheen. We note a 1/4" crack extending back from the muzzle end of the stock on the left side of the forearm. The top of the grip is adorned with a decorative brass thumbpiece that is matched in its general flare by the sideplate used on this pistol. The brass grip cap and triggerguard, as well as the single ramrod and entry pipe, are polished bright. The extensions of the grip cap that run up the grip are a common feature found on military pistols of the era. A single screw penetrates the center of the grip cap, securing it in place. The triggerguard is pinned into position in the front, and a screw retains the grip rail. The small diameter steel ramrod is fitted with a flared brass loading tip. We recommend our #PL-6-54 to service this pistol. The backside view of the gun shows the brass sideplate. Two dome headed lock bolts pass through the sideplate to engage the lock opposite, holding both lock and sideplate in position.

The small flint lock was assembled from castings by The Rifle Shoppe. The lock has been polished bright to match the barrel and the plate is stamped D DONATI. We recommend our #FLINT-ENG-5 for this lock. The steel vent liner is positioned directly above the center of the flash pan, high enough to serve as a window on the hottest part of the flash. If your flint pistol suffers from that infamous slow whoosh-bang ignition delay, study the work of today's best gun makers, and position your vent well centered on the pan, high above the bottom, to serve as a window on the center of the flash. The single curled trigger requires a firm pull to fire the lock.

This pistol has a bore that is bright and ready to shoot. If you are a French and Indian War or Revolutionary War reenactor, consider this pistol for your impression. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.530" round balls, pure lead, Hornady, per 100

Part Number:	BALL-530
Availability:
Price:	$21.99
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.19
Order Quantity:

Ball puller, steel screw, .54 caliber brass collar, 10-32 thread

Part Number:	BP-54-10
Availability:
Price:	$3.99
Order Quantity:

Bore brush, bronze, for .54 caliber, 10-32 thread

Part Number:	BRUSH-54-10
Availability:
Price:	$3.19
Order Quantity:

Flint priming flask, throws about 3 grains, brass

Part Number:	FLASK-PP-3
Availability:
Price:	$19.99
Order Quantity:

English gun flint, 3/4 x 7/8", standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-6
Availability:
Price:	$2.60
Order Quantity:

Pack of 12 English Gun flints, 3/4 x 7/8", standard rifle, large Siler, L&R, most others. We are temporarily limiting purchase of this item to one twelve pack per order. We will manually edit your order if your order exceeds that amount.

Part Number:	FLINT-ENG-6-PACK-12
Availability:
Price:	$28.60
Order Quantity:

Fouling Scraper, flat face, brass, .54 caliber, 10-32 thread

Part Number:	FS-54-10
Availability:
Price:	$4.29
Order Quantity:

Jag, jagged cleaning tip, brass, .54 caliber, 3/8" rod, 10-32 thread

Part Number:	JS-54-6-10
Availability:
Price:	$5.09
Order Quantity:

Powder measure, brass, adjustable 0 to 120 grains, with spout

Part Number:	MAS-120
Availability:
Price:	$20.99
Order Quantity:

Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin

Part Number:	MINK-OIL
Availability:
Price:	$7.59
Order Quantity:

Shooting patches, .010" cotton, .50 - .59 caliber, per 100, dry

Part Number:	OX-10-50-D
Availability:
Price:	$4.79
Order Quantity:

Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber

Part Number:	OX-CLEAN-58C
Availability:
Price:	$5.79
Order Quantity:

Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler

Part Number:	PICK-BRUSH-H
Availability:
Price:	$14.99
Order Quantity:

Pistol loading rod and short starter with .54 caliber cleaning jag, 3/8" diameter hickory rod, 10-32 threads, 12" overall usable length including .54 caliber cleaning jag

Part Number:	PL-6-54
Availability:
Price:	$20.08
Order Quantity:

Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox

Part Number:	TOOL-TURN-U
Availability:
Price:	$8.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Flintlock guns > Flintlock pistols