Lancaster Longrifle,
.50 caliber, 42" Green Mountain barrel,
deluxe Siler flint lock, curly maple,
brass trim, used, by T. Long
Part Number: AAS-618
Availability: In Stock
Price: $2,439.00
Order Quantity:
This classic American flint longrifle captures the style of Lancaster County gun makers. This rifle features a .50 caliber Green Mountain barrel, and is stocked in curly maple with brass furniture and engraved patchbox. Neatly assembled by contemporary builder Tom Long. Trigger reach is 14-3/4" to fit a larger or taller shooter and weight is 8.5 pounds.

The .50 caliber Green Mountain 42" straight octagon barrel measures 7/8" wide. The .50 caliber bore is rifled with eight equal lands and grooves with a 1 in 72" twist for a tightly patched round ball. We recommend our .490" pure lead round ball, patched with .015" Ox-Yoke patching, lubricated with our Mink Oil tallow patch grease, if you require best accuracy. Green Mountain Muzzle Loading Rifle Barrels are machined from high quality American made bar stock, A.I.S.I. 1137 modified, stress relieved, annealed, certified rifle barrel quality steel. All barrels are drilled from solid stock, reamed to a high degree of smoothness, then optically checked for straightness. Very close tolerances are maintained. The barrel has a smooth chocolate brown finish. A tall wide brass blade is dovetailed 1" behind the muzzle and a flat top rear sight is dovetailed 10" ahead of the breech.

This attractive flint fullstock longrifle is trimmed in brass, which has aged to a mellow patina. The buttplate easily engages the shoulder and is comfortable to aim. The comb of the buttplate is shaped with crisp flats with a wedding band transition to round. The maple stock is decorated with incised carving that accents the comb and flows down to decorate the wrist. The brass patchbox is hand engraved with decorative scrolls. Correct steel screws are used to mount the brass patchbox and hardware. A deep correctly cut patchbox cavity is hidden under the lid.

Our bottom view of the rifle shows off the engraved brass toeplate. The decorative toeplate is held in position by three small screws. In addition to being decorative the toeplate adds a level of protection to the wood, when the toe commonly comes into contact with the ground during loading and cleaning. The brass triggerguard is pinned to the stock at the front and a screw retains the rear. Further ahead on the forearm incised carving decorates the forearm behind the skirt of the ramrod entry pipe. The stock is shaped with an incised molding that extends the length of the ramrod channel. The hand made ramrod pipes are shaped from sheet brass and shaped with filed flats on the body. The ramrod is fitted with a brass tip with 10-32 threads for loading and cleaning accessories. The hand made brass muzzle cap is secured with a brass rivet. The engraved sideplate was cut from sheet brass with sweeping curves and a square tail in Lancaster County, Pennsylvania rifle style with two domed head lock bolts securing the lock on the opposite side. The stock is shaped with a square cheek inlaid with a large brass oval inlay with a running deer. Raised and incised opposing C scrolls decorate the area of the stock behind the cheek.

Ignition is provided by a Jim Chambers' deluxe Siler flint lock. Tuned for best performance the deluxe Siler lock features a slightly larger cock, and fancy frizzen spring. The beefy mainspring provides lots of energy, and this fast lock will throw sparks on the carpet. The lock is finished to a dark brown matches the finish of the barrel. The lock is fitted with our best real hand knapped gun flint, by Tom Fuller, imported from England. Order our best 3/4" flint by Tom Fuller, #Flint-ENG-6, for best performance in flint lock. The stainless steel touch hole liner is properly positioned on the pan, centered on the heat of the flash. If your flint longrifle suffers from that infamous slow whoosh-bang ignition delay, study the work of today's best gun makers, and position your vent well centered on the pan, high above the bottom, to serve as a window on the center of the flash. The slender open bow triggerguard is fitted with double lever double set triggers. The double lever double set triggers are correctly adjusted, you may cock the lock, or set the trigger, in any sequence. Turn the tiny set trigger adjustment screw, between the two triggers, inboard to reduce the set trigger release tension.

This longrifle is in excellent well maintained condition with a bright bore that is ready to shoot. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.490" round balls, pure lead, Hornady, per 100
.490" round balls, pure lead, Hornady, per 100
Part Number: BALL-490
Availability: In Stock
Price: $12.99
Order Quantity:
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Track's best Black Powder BORE CLEAN Solvent, with flip-top spout
Part Number: BORE-CLEAN
Availability: In Stock
Price: $3.99
Order Quantity:
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Ball puller, steel screw, .50 caliber brass collar, 10-32 thread
Part Number: BP-50-10
Availability: In Stock
Price: $3.75
Order Quantity:
Bore brush, bronze, for .50 caliber, 10-32 thread
Bore brush, bronze, for .50 caliber, 10-32 thread
Part Number: BRUSH-50-10
Availability: In Stock
Price: $2.99
Order Quantity:
Flint priming flask, throws about 3 grains, brass
Flint priming flask, throws about 3 grains, brass
Part Number: FLASK-PP-3
Availability: In Stock
Price: $14.99
Order Quantity:
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Fouling Scraper, flat face, brass, .50 caliber, 10-32 thread
Part Number: FS-50-10
Availability: In Stock
Price: $3.79
Order Quantity:
Powder Horn,
large, 11 to 14",
with antique patina finish
Powder Horn, large, 11 to 14", with antique patina finish
Part Number: HORN-A-L
Availability: In Stock
Price: $69.99
Order Quantity:
Priming Horn,
small, 4 to 5",
with antique patina finish
Priming Horn, small, 4 to 5", with antique patina finish
Part Number: HORN-A-S
Availability: In Stock
Price: $57.99
Order Quantity:
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Jag, jagged cleaning tip, brass, .50 caliber, 3/8 rod, 10-32 thread
Part Number: JS-50-6-10
Availability: In Stock
Price: $4.25
Order Quantity:
Powder measure, brass, adjustable 0 to 120 grains, with spout
Powder measure, brass, adjustable 0 to 120 grains, with spout
Part Number: MAS-120
Availability: In Stock
Price: $14.99
Order Quantity:
Trapper's MINK OIL TALLOW,
patch grease,
for match shooting & cold weather hunting,
one 8 oz. tin
Trapper's MINK OIL TALLOW, patch grease, for match shooting & cold weather hunting, one 8 oz. tin
Part Number: MINK-OIL
Availability: In Stock
Price: $6.99
Order Quantity:
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Shooting patches, .015" cotton, .50 - .59 caliber, per 100, dry
Part Number: OX-15-50-D
Availability: In Stock
Price: $3.29
Order Quantity:
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Cleaning Patches, 2-1/2" diameter, bag of 100, pure cotton flannel, for .45 to .58 caliber
Part Number: OX-CLEAN-58C
Availability: In Stock
Price: $3.89
Order Quantity:
Pick & Pan Brush,
with brass chain, button clasp,
and black bristle brush,
for flint musket, rifle, or fowler
Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler
Part Number: PICK-BRUSH-H
Availability: In Stock
Price: $13.99
Order Quantity:
Forged steel vent pick,
2-1/2" long, for rifle
Forged steel vent pick, 2-1/2" long, for rifle
Part Number: PICK-VENT-2
Availability: In Stock
Price: $2.99
Order Quantity:
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Ramrod, 3/8" hickory, 48" long, brass tip, 10-32 thread
Part Number: RAMROD-6-10-B
Availability: In Stock
Price: $15.99
Order Quantity:
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber.
Part Number: ST-7
Availability: In Stock
Price: $6.99
Order Quantity:
Timothy Pickering's Tool,
for flint muskets,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
Timothy Pickering's Tool, for flint muskets, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Part Number: TOOL-PICK-L
Availability: In Stock
Price: $11.99
Order Quantity:
Timothy Pickering's Tool,
medium size, for flint rifles & fowling guns,
the first U. S. issue gun tool,
designed by our first U. S. Quartermaster
Timothy Pickering's Tool, medium size, for flint rifles & fowling guns, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Part Number: TOOL-PICK-M
Availability: In Stock
Price: $11.99
Order Quantity:
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
Primitive Rifleman's Turn Screw, hand forged tempered steel screwdriver, to fit in a longrifle patchbox
Part Number: TOOL-TURN-U
Availability: In Stock
Price: $6.99
Order Quantity:
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Patch puller, corkscrew worm, steel, brass base, 10-32 thread
Part Number: WORM-CORK-10
Availability: In Stock
Price: $6.59
Order Quantity:
Track's Catalog 18,
Out of Print
Please use our FREE on-line catalog and web site.
Track's Catalog 18, Out of Print Please use our FREE on-line catalog and web site.
Part Number: CATALOG-18
Availability: Book is no longer being printed or produced. Once we sell through our remaining inventory, item will no longer be available.  We will not be getting any more in.
Price: $10.00
  
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2020Track of the Wolf, Inc.
Accepted Credit Cards