Thumbpiece inlay, from 1750 era English fowling gun. This thumbpiece measures 2-1/4" tall, and 1-1/8" at the widest point.

Thumbpiece inlay, from 1750 era English fowling gun. This thumbpiece measures 2-1/4" tall, and 1-1/8" at the widest point.

Thumbpiece inlay, from 1750 era English fowling gun. This thumbpiece measures 2-1/4" tall, and 1-1/8" at the widest point.

Recommended for a 20 gauge gun or .62 caliber rifle, the .595" ball works well in a barrel with a .610" or larger bore. This is a true 20 gauge. We also offer the #LEE-600-DC ball mold for slightly larger bores, commonly .625" at the muzzle. A tiny bit larger than true 20 gauge (20 balls per pound), the .625" bore size is popular due to the low cos

Recommended for 20 gauge guns and .62 caliber rifles, the .600" ball works well in barrels with a .615" or larger bore. We offer the #LEE-595-DC ball mold for slightly tighter bores, typically .610" at the muzzle. We recommend pure soft lead for muzzle loading balls. Lee molds are aluminum blocks, in permanently attached steel handles with sturdy g

This new percussion lock will replace the Dixie Tennessee Mountain rifle lock. A new lock bolt is included. This percussion longrifle is nearly always stocked in cherry, trimmed in iron, marked "JAPAN" on the barrel, made by Miroku, Japan, for Dixie Gun Works. It nearly always has double set triggers, and often has a grease hole bored in the buttst

This Northwest Trade Gun lock plate and frizzen are machined together. The lock plate is drilled and tapped for our internal lock parts. The lock plate is cast with the integral pan & pan bridle. Will require some de-burring and polishing to a bright finish. Overall length 6.06" with a height of 1.08" behind the pan.

Our Tulle fusil-de-chasse kit with 44" octagon-to-round barrel is illustrated in this full size plan drawing. Produced in Tulle (TVLLE), France the fusil de chasse was a popular trade gun for hunter, settlers, and natives, in the settlements in New France. Our plans depict a classic fusil de chasse and incorporate the best features of many survivin

Ramrod for Davide Pedersoli's North West Trade Gun in 20 gauge, 9mm (.35") stained hickory, 35-3/4" long. flared brass tip for seating wads or cards, 10-32 threaded tip at rear. Made in the U.S.A. by Track of the Wolf

A thin film of RIG Universal Gun Grease will help keep your firearms rust free. One thorough application of RIG inside and out will protect your rifle, handgun, shotgun, or muzzleloader against rust or corrosion. 1.5 oz squeeze tube. Manufactured by Brichwood Casey.

A thin film of RIG Universal Gun Grease will help keep your firearms rust free. One thorough application of RIG inside and out will protect your rifle, handgun, shotgun, or muzzleloader against rust or corrosion. 12 oz jar. Manufactured by Brichwood Casey.

A thin film of RIG Universal Gun Grease will help keep your firearms rust free. One thorough application of RIG inside and out will protect your rifle, handgun, shotgun, or muzzleloader against rust or corrosion. 3 oz jar. Manufactured by Brichwood Casey.

Ramrod pipes for ideal for a 1750 era fullstock English fowling gun, as cast for 3/8" diameter ramrod, lugged for pin, wax cast brass or steel. Made in the U.S.A. Shown in side view, and top view, these ramrod pipes are round with double rings. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-3/8" length, about 3

Ramrod entry pipe for a 1750 era English fowling gun, as cast to fit a 3/8" diameter ramrod, lug for pin, wax cast brass. Made in the USA. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-3/8" length, about 3-5/8" overall, including the skirt. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fu

Ramrod entry pipe for a 1750 era English fowling gun, as cast to fit a 3/8" diameter ramrod, lug for pin, wax cast steel. Made in the USA. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-3/8" length, about 3-5/8" overall, including the skirt. Use our #PIN-3/32" steel dowel pin for mounting the entry pipe on a fu

Forward Ramrod pipe for a 1750 era English fowling gun, as cast for a 3/8" diameter ramrod, lug for pin, wax cast brass. Made in the USA. Our forward pipe, is 1-1/2" overall length. Made for a fullstock rifle (with wood extending to muzzle), most rifles use two forward pipes. A few extra long rifles use three forward pipes. Use one, or sometimes tw

Forward Ramrod pipe for a 1750 era English fowling gun, as cast for a 3/8" diameter ramrod, lug for pin, wax cast steel. Made in the USA. Our forward pipe, is 1-1/2" overall length. Made for a fullstock rifle (with wood extending to muzzle), most rifles use two forward pipes. A few extra long rifles use three forward pipes. Use one, or sometimes tw

Our complete set of screws & pins for the North West Trade Gun are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 2 #BOLT-L-10-D domed lock bolt, 10-32, for mounting the lock, plus1 #BOLT-L-10-USL domed lock bolt, 10-32, for use as an inverted tang screw, plus1 #SCREW-10-D domed wood

Copied from an original French fusil fin trade gun. These beautiful weapons were widely traded in the 1730 - 1760 era throughout America. Wax cast brass, with decorative engraving. Overall length is 12", inside trigger bow is 2-1/16" long, and 1-3/16" deep.

Copied from an original French fusil fin trade gun. These beautiful weapons were widely traded in the 1730 - 1760 era throughout America. Wax cast steel, with decorative engraving. Overall length is 12", inside trigger bow is 2-1/16" long, and 1-3/16" deep.

Small size, this tool is made to fit your Jim Chamber's small Queen Anne pistol lock, small Siler flint lock, smaller L&R Bailes locks, and pistol size flint locks. Hand forged, ground to fit the lock screws correctly, and tempered, this tool will give a lifetime of service, exactly like the original. This is a replica of the first U. S. issued gun

A superior lubricant for all climates. Contains PTFE lubricant to greatly reduce the friction between mating surfaces. Will not gum-up or lose its viscosity under extreme temperature variations -55 to 300 degrees Fahrenheit. Low evaporation rate assures protection against rust. By Birchwood Casey. This item cannot be shipped to the state of Califor

Cleans and polishes old stocks. Weather proof ingredients protect new and old finishes. Won't finger mark like wax.

A high pressure aerosol can of degreaser that blasts out dirt and fouling and air dries immediately. It removes all kinds of oil, grease, softens powder residue, and leaves metal clean and free of film. Excellent for removing preservative grease from bullet molds. Safe, nonflammable, harmless to metal finish. This item cannot be shipped to the stat

Sealer and Filler seals out moisture and fills the pores in one easy step. A clear sealer and filler lets you choose your favorite stain or leave the wood in a natural tone.Penetrates grain quickly, easy to use, dries fast. By Birchwood Casey. This item cannot be shipped to the state of California.