Your search for 'tang sight'
returned
264 results.
|
Screw for Sharps Tang Sight , each, 4-.7mm thread for Italian 1863 & 1874 Sharps Rifles by Pedretti, SILE, EMF, IAB, Powder River, or Marcheno , .270" diameter head, bright steel to mount Sharps tang sight. Order two (2) screws!
Screw for Sharps Tang Sight , 4-.7mm thread, bright steel to mount Sharps tang sight. These screws have a .270" diameter head for fit Italian manufactured tang sight base. Overall length of .365", and threaded shaft of .27". Two of these screws are required! to mount a tang sight on an a 1863 or 1874 Sharps rifle by Pedretti, SILE, EMF, IAB, Powd
|
|
|
|
|
Tang sight, Lyman No. 2 sight, for Henry Lever Action Rifles
William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. The Lyman No. 2 sight for Henry lever action rifles. Lyman recommends this sight for the following models: H006 – Big Boy, Big Boy Carbine, Big Boy Silver H009 – All-Weather 30-30 H010 – All-Weather 45-70 H012 – Big Boy All W
|
|
Tang sight, Lyman No. 2 sight, for Model 1894 Winchester Rifle , also fits 1866, 1890, 1892, & Rossi lever rifles, and 1885 High Wall & Low Wall rifles with 2.195" hole centers.
William Lyman invented these sights, and founded the Lyman Gunsight Company in 1878. These are wonderfully precise replicas. The Lyman No. 2 sight for Winchester fits their Model 94, 1894, 1866, 1890, 1892, 62, and 62A lever action rifles, Model 1885 high wall and low wall single shot rifles, and Rossi Model 92 and 62 rifles and carbines. This sigh
|
|
Taps , high speed steel, 4-.70mm thread, for Italian tang sight screws
Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal to cut threads. Clearance Drills are large enough to allow the body of the bolt to pass through the hole. Tap Drill: for 4-.70
|
|
Hadley Eye Disk , for Pedersoli 1874 Sharps Vernier Sights
Blued steel, finished non-glare blue black, this Hadley eye disk is threaded 5-.5MM to fit the Vernier Tang Sight for Davide Pedersoli's 1874 Sharps rifle #RS-DP-1874, or the Soule rear sight #RS-DP-SOULE-4. The rim is knurled for easy insertion. Roll the small knurled wheel to select one of eight apertures. A small spring loaded ball detent locks
|
|
|
Tap , high carbon steel, 10-36 thread, plug tap, to start a blind or through hole
Tap, high carbon steel, 10-36 SPECIAL thread, plug tap with three to five threads chamfered. This special non-standard thread size is often needed to thread tangs for sight screws, to accept Axtell tang sights, exactly as used on the original rifles. Tap Drill: for 10-36 thread, use No. Drill-21 Clearance Drill: for 10-36 thread, use fractional
|
|
Long Tang Breech Plug , 5/8-18 thread, for 13/16" or 7/8" barrel
Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr
|
|
|
Long Tang Breech Plug , 9/16-18 thread, for 13/16" or 7/8" barrel
Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr
|