Vent, Touch Hole Liner , 1/4-28 thread, stainless steel, with lug for easy installation Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 1/4-28, stainless steel with lug for easy installation, made in the USA. Drill, tap, and countersink the barrel. Use the wrench lug to install the liner and seat against the barrel. Check the liner protrusion into the bore, remove and trim length if necessary. Cut the       THL-S4W . . . $4.99

Vent, Touch Hole Liner , 5/16-24 thread, stainless steel, slotted for easy removal Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 5/16-24, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen jo       THL-S5S . . . $4.99

Vent, Touch Hole Liner , 3/8-24 thread, stainless steel, slotted for easy removal Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 3/8-24, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen joi       THL-S6S . . . $4.99

Vent, Touch Hole Liner , for Thompson Center flintlock rifles, 1/4-28 thread, stainless steel, slotted for easy removal Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 1/4-28, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen joi       THL-TCF . . . $5.99

Vent, Touch Hole Liner , 1/4-32 thread, carbon steel, White Lightnin' Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Known as the White Lightnin' vent, the special 1/4-32 fine threads allow an extra large concave cavity inside, for use on 13/16" to 1" octagon barrels. Made in the USA, carbon steel, with removable lug for easy installation. Simply drill out your existing vent hole with out tap       THL-W4I . . . $5.99

Vent, Touch Hole Liner , 1/4-32 thread, stainless steel, White Lightnin' Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Known as the White Lightnin' vent, the special 1/4-32 fine threads allow an extra large concave cavity inside, for use on 13/16" to 1" octagon barrels. Made in the USA, stainless steel, with removable lug for easy installation. Simply drill out your existing vent hole with out       THL-W4S . . . $5.99

Vent, Touch Hole Liner , 5/16-32 thread, stainless steel, White Lightnin' Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Known as the White Lightnin' vent, the special 5/16-32 fine threads allow an extra large concave cavity inside, for use on 13/16" to 1" octagon barrels. Made in the USA, stainless steel, with removable lug for easy installation. Simply drill out your existing vent hole with out       THL-W5S . . . $5.99

Vent, Touch Hole Liner complete kit with drill & tap , 5/16-32 thread, stainless steel, White Lightnin' Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Known as the White Lightnin' vent, the special 5/16-32 fine threads allow an extra large concave cavity inside, for use on 13/16" to 1" octagon barrels. Made in the USA, stainless steel, with removable lug for easy installation. Concave inside, this vent liner brings the main p       THL-W5S-KIT . . . $33.57

Vent, Touch Hole Liner , 3/8-32 thread, stainless steel, White Lightnin' Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Known as the White Lightnin' vent, the special 3/8-32 fine threads allow an extra large concave cavity inside, for use on 13/16" to 1" octagon barrels. Made in the USA, stainless steel, with removable lug for easy installation. Simply drill out your existing vent hole with out       THL-W6S . . . $5.99

Antique Belt Pistol , .58 caliber, 7" swamped barrel, percussion conversion lock, checkered walnut, iron trim This antique percussion conversion belt pistol has a French influence with a neatly checkered grip. This pistol has a .58 caliber rifled swamped octagon barrel. The bore is bright and has been well maintained. The stock is solid and does not show any cracks or repairs. The pistol was original finished as a flint lock, which was later converted to p       AAV-048 . . . $1,759.00

Early Southern Mountain Rifle , .40 caliber 46" swamped barrel, TRS flint lock, maple, brass trim, used This Early Southern Mountain longrifle is stocked in maple with limited brass trim in true "Poor Boy Fashion." This rifle represents a working man's gun, made from recycled parts, at a time when nothing went to waste on the frontier. The rifle features a .40 caliber swamped barrel that measures 46" long. The bore has been well maintained and is rea       AAV-424 . . . $2,699.00

Antique Model 1789 Saxony Dragoon Pistol, .69 caliber, 10-3/4" barrel, flintlock, walnut, brass, captured steel rod This model 1789 Saxony Dragoon Pistol is .69 caliber with a 10-3/4" tapered round barrel. Saxony is a Eastern Germanic state surrounding modern day Dresden and was part of what is considered the Holy Roman Empire until 1806. The walnut stock is trimmed in brass furniture. The steel ramrod is captured to prevent loss, which was innovative for the pe       AAV-578 . . . $2,999.00

Kentucky Pistol .50 caliber 10-1/2" tapered barrel, small Siler flint lock, curly maple, engraved brass trim, signed by R.W. Deitz This Kentucky pistol is stocked in curly maple, stained to a golden brown. The brass furniture has a hand burnished appearance with engraved accents and nicely compliments the tone of the stock. The tapered octagon barrel is finished to a dark brown, while the small Siler flintlock has a temper blue finish. This pistol is unfired and has only a few       AAW-147 . . . $2,699.00

Henry E. Leman ~ Lancaster, Pennsylvania , .54 caliber, 34" Rice barrel, L&R late English flintlock, curly maple, brass, new, by Mike Sullivan Perhaps the most famous of the Lancaster makers, Henry Eicholtz Leman (also spelled Lehman early in his career), created a factory to produce arms for westbound settlers. This flint longrifle has 1830 era Lancaster County style architecture and furniture, and is modeled after Henry Leman's earlier work. This rifle was assembled by contemporary buil       AAW-338 . . .

Kentucky Pistol , .54 caliber, 10-3/8" barrel, flintlock, maple stock, brass trim, as new with box, by Davide Pedersoli This attractive Kentucky pistol has a large grip, angled enough to provide perfect sight alignment, while it feels good in your hand. Manufactured by Davide Pedersoli & Company of Italy. The pistol is as-new with the factory box. The frizzen only has a few strikes on it from testing. Stocked in curly maple, the stock has scattered figure from muzzl       AAW-406 . . . $749.00

Colonial Pistol , .54 caliber 9" Getz swamped barrel, small Siler flint lock, maple, brass, marked W.K. This Colonial or Kentucky flintlock pistol has a medium size grip for a man's hand, angled to point instinctively. Assembled from pistol parts by the late William Kennedy. The barrel has Mr. Kennedy's WK touch mark at the breech, but it does not appear to be fully assembled by him. The lock still retains the original matte gray finish and was never       AAW-427 . . . $1,349.00

English Fowler , 20 gauge 41" tapered round barrel, cherry, wire inlay, iron trim, Chambers' flintlock, used This well made English fowler is stocked in cherry accented with raised carving and silver wire inlay. The stock is shaped with a slender graceful appearance and the carving is very well executed. This fowler's overall architecture closely resembles an antique by Barbar shown in Of Sorts for Provincials by Jim Mullins, our #BOOK-OSFP. A few of the       AAW-444 . . . $2,449.00

Building a Swivel Breech , includes color photos, construction notes and drawings, with tips on building a complete rifle, by Dave Waters The intent of this book is to show the essentials of what goes into building the "heart" of a swivel rifle, namely the action. After you study these pages you should have a valuable road map for building one. Soft cover spiral bound, 24 pages, color photos, and black and white dimensioned blueprints. The Table of Contents includes the following       BOOK-BASB . . . $23.99

Powder Horns and Their Architecture , by Madison Grant One of three popular books by Madison Grant, this volume is devoted to the most basic and necessary accoutrement of the muzzle loading longrifle, the powder horn. Primitive hand made American powder horns, from the late eighteenth and early nineteenth centuries, are the main focus of this well illustrated book. Hard cover, 8-1/2 x 11" format, 165 p       BOOK-PHAA . . . $36.00

Simplified V Springs , easy home tempering instructions, by Kit Ravenshear The late Kit Ravenshear created these gunsmithing manuals to share his workshop knowledge and experience acquired during his 50 years of practice. These 7-1/2 x 8-1/2" soft cover booklets of about 20 pages are aimed at the innovative craftsman. Mr. Ravenshear shows that you don't need highly technical equipment. His techniques are amazingly unsophi       BOOK-SVS . . . $6.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 8-32 female thread to fit metal ramrod Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 8-32 male thread will fit your metal ramrod end, on military rifle, if it has 8-32 threads. You can easily enlarge the hole and tap it to fit a 12-24 ramrod tip for an 1803 Harper's Ferry Rifle, or other popular metal rod. The extra length will gi       BP-1817-08-F . . . $10.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 8-32 male thread Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 8-32 male thread will fit your ramrod tip. The extra length will give you a better grip on your ramrod. Stuck ball? No powder? Our first technique is to "prime" the bore, feeding a small amount of FFFFg under the nipple or into the vent hole. Firi       BP-1817-08-M . . . $10.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 10-32 female thread to fit metal ramrod Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 10-32 male thread will fit your metal ramrod end, on your Brown Bess, Springfield, Charleville, or Zouave musket, if it has 10-32 threads. You can easily enlarge the hole and tap it to fit a 12-24 ramrod tip for an 1803 Harper's Ferry Rifle, or ot       BP-1817-10-F . . . $12.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 10-32 male thread Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 10-32 male thread will fit your ramrod tip. The extra length will give you a better grip on your ramrod. Stuck ball? No powder? Our first technique is to "prime" the bore, feeding a small amount of FFFFg under the nipple or into the vent hole. Fir       BP-1817-10-M . . . $12.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 12-24 female thread to fit metal ramrod Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 10-32 male thread will fit your metal ramrod end, on your Brown Bess if it has 12-24 threads. The extra length will give you a better grip on your ramrod. Stuck ball? No powder? Our first technique is to "prime" the bore, feeding a small amount of       BP-1817-12-F . . . $12.99

has been added to your .

---