Your search for 'hawken'
returned
342 results.
|
Flint Hawken 15/16" slant faced breech & tang, 5/8-18 thread, by L&R
Pre-fitted plug and tang mating surfaces are machined and finished by L&R, for a snap fit. This well made slant faced flint plug and tang is threaded 5/8-18 with .690" thread journal length and .500" thread engagement for strength. The powder chamber is drilled .375" diameter, over one inch deep, to the center of the octagon extension. The tang swe
|
|
|
Flint Hawken 1" slant faced breech & tang, 3/4-16 thread
This well made slant faced flint plug and tang is threaded 3/4-16 with .625" thread journal engagement for strength. The powder chamber is drilled .375" diameter, over one inch deep, to the center of the octagon extension. The tang sweeps up to the wood, at both rear corners. Ideally suited for use with L&R's #LOCK-LR-900 right flintlock, or #LOCK-
|
|
Ramrod for Traditions St. Louis Hawken Rifle , 9mm (.354") brown Delrin nylon, 27-1/4" maximum length, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made by Track of the Wolf, Elk River, Minnesota.
Ramrod for Traditions St. Lous Hawken Rifle , 9mm (.354") brown Delrin nylon, 27-1/4" length, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made by Track of the Wolf, Elk River, Minnesota.
|
|
Ramrod for Traditions St. Louis Hawken Rifle , 9mm (.354") stained hickory, 27-1/4" maximum length, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made by Track of the Wolf, Elk River, Minnesota.
Ramrod for Traditions St. Lous Hawken Rifle , 9mm (.354") stained hickory, 27-1/4" length, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made by Track of the Wolf, Elk River, Minnesota.
|
|
Ramrod for CVA Hawken Rifle , 9mm brown Delrin nylon, 27-1/2" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .50 caliber cleaning jag. Made in the USA by Track of the Wolf, Elk River, Minnesota.
Ramrod for CVA Hawken Rifle , 9mm brown Delrin nylon, 27-1/2" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .50 caliber cleaning jag. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
|
|
|
Ramrod for CVA Hawken or Stalker Rifle , 9mm brown Delrin nylon, 27-1/2" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for CVA Hawken or Stalker Rifle , 9mm brown Delrin nylon, 27-1/2" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
|
|
|
Ramrod for CVA Hawken or Stalker Rifle , 9mm stained hickory, 27-1/2" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for CVA Hawken or Stalker Rifle , 9mm stained hickory, 27-1/2" long. Brass tips are threaded 10-32 at rear, 8-32 at front. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
|
|
|
Ramrod for Thompson Center Hawken , 3/8" brown Delrin nylon, 28-5/8" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .45 caliber cleaning jag. Made in the USA, by Track of the Wolf, Elk River, Minnesota.
Ramrod for Thompson Center Hawken , 3/8" brown Delrin nylon, 28-5/8" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .45 caliber cleaning jag at front. Made in the USA, by Track of the Wolf, Elk River, Minnesota.
|
|
Ramrod for Thompson Center Hawken , 3/8" stained hickory, 28-5/8" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .45 caliber cleaning jag. Made in the USA, by Track of the Wolf, Elk River, Minnesota.
Ramrod for Thompson Center Hawken , 3/8" stained hickory, 28-5/8" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .45 caliber cleaning jag at front. Made in the USA, by Track of the Wolf, Elk River, Minnesota.
|
|
|
Ramrod for Thompson Center Hawken with factory round ball twist barrel , 3/8" brown Delrin nylon, 30-5/8" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .50 caliber cleaning jag. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for Thompson Center Hawken with factory round ball twist barrel , 3/8" brown Delrin nylon, 30-5/8" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .50 caliber cleaning jag. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
|
|
|
Ramrod for Thompson Center Hawken with factory round ball twist barrel , 3/8" brown Delrin nylon, 30-5/8" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .54 caliber cleaning jag. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for Thompson Center Hawken with factory round ball twist barrel , 3/8" brown Delrin nylon, 30-5/8" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .54 caliber cleaning jag. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
|
|
Ramrod for Thompson Center Hawken with factory round ball twist barrel , 3/8" brown Delrin nylon, 30-5/8" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for Thompson Center Hawken with factory round ball twist barrel , 3/8" brown Delrin nylon, 30-5/8" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
|
|
Ramrod for Uberti Santa Fe Hawken , 7/16" stained hickory, 32-5/8" long. Brass tip is threaded 10-32 at front, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
Ramrod for Uberti Santa Fe Hawken , 7/16" stained hickory, 32-5/8" long. Brass tip is threaded 10-32 at front, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod.
|
|
Hawken Ramrod Pipes , round, for 7/16" rod, wax cast brass or iron
Shown in side view, and top view, these ramrod pipes are round, for 7/16" ramrod, in your choice of brass or iron (steel), for fullstock or halfstock. Iron pipes, and iron furniture, are the correct traditional choice for Hawken rifles. Other Plains rifles were often trimmed in brass. Our entry pipe (where rod enters the wood) has an integral ski
|
|
Traditional Hawken Ramrod Pipes , round, for 7/16" rod, wax cast brass or iron
Shown in side view, and top view, these ramrod pipes are round, with decorative rings at ends, for 7/16" ramrod, in your choice of brass or iron (steel), for fullstock or halfstock. Iron pipes, and iron furniture, are the correct traditional choice for Hawken rifles. Other Plains rifles were often trimmed in brass. Our entry pipe (where rod enter
|
|
Rear sight , semi-buckhorn for 15/16" or 1" barrels, Kit Carson's Hawken style
This medium size version of our Kit Carson's Hawken rifle sight is intended for a barrel up to 1" octagon. Tall, to reduce heat mirage, the center notch is indicated. Wax cast steel, made in the U.S.A., the dovetail is about .370" long and .580" wide. Dovetail to a depth of .050". Height from the bottom of the dovetail to the top of the sight notch
|
|
Rear sight, Mariano Modena Hawken style for 15/16" or 1" barrels, wax cast steel
Patterned after an original rear sight found on a very early Hawken halfstock rifle, owned by the famous mountain man of Taos, Mariano Modena. Angular flats decorate the base of this semi-buckhorn sight. The base is .500" long by .580" wide. Dovetail .050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.29".
|
|
Rear Sight Elevation Screw , for Thompson Center Hawken, Renegade, and others, 4-40 threads, adjustment clicks, blued steel
Rear sight elevation screw, for Thompson Center Hawken, Renegade, and New Englander. 4-40 threads, adjustment clicks, blued steel. Head diameter 0.31". Will not fit the Cherokee, or Seneca rear sights.
|
|
Rear Sight Elevation Screw No. 2 , for earlier Thompson Center Hawken, Renegade, and others, 5-40 threads, adjustment clicks, blued steel
Rear sight elevation screw, for early production Thompson Center Hawken, Renegade, and New Englander. 5-40 threads, adjustment clicks, blued steel. Head diameter 0.31". Will not fit the Cherokee, or Seneca rear sights.
|
|
Screws & pins , complete set for Hawken fullstock rifle , unplated steel
Our complete set of screws & pins for the Hawken fullstock rifle are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 1 #BOLT-L-8-F lock bolt, 8-32, 3/8" head, for mounting the lock, plus 2 #BOLT-T-8-FL tang bolt, 8-32, countersink flat head, plus 2 #SCREW-10x1 wood screws, #10 x 1"
|
|
Screws & pins , complete set for Hawken pistol , unplated steel
Our complete set of screws & pins for the Hawken pistol are made of unplated steel, with slotted heads. These are becoming scarce. Our set includes: 1 #BOLT-L-8-F lock bolt, 8-32, 3/8" head, for mounting the lock, plus 1 #BOLT-T-8-FL tang bolt, 8-32, countersink flat head, plus 2 #SCREW-6x5/8 wood screws, #6 x 5/8", for mounting the tang & trigge
|
|
Screws & pins , complete set for Hawken pistol fullstock , unplated steel
Our complete set of screws & pins for the Hawken pistol fullstock are made of unplated steel, with slotted heads. These are becoming scarce. Our set includes: 1 #BOLT-L-8-F lock bolt, 8-32, 3/8" head, for mounting the lock, plus 1 #BOLT-T-8-FL tang bolt, 8-32, countersink flat head, plus 2 #SCREW-6x5/8 wood screws, #6 x 5/8", for mounting the tan
|
|
Screws & Pins , complete set for Hawken halfstock rifle , unplated steel
Our complete set of screws & pins for the Hawken halfstock rifle are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 1 #BOLT-L-8-F lock bolt, 8-32, 3/8" head, for mounting the lock, plus 2 #BOLT-T-8-FL tang bolt, 8-32, countersink flat head, plus 2 #SCREW-10x1 wood screws, #10 x 1",
|