Your search for 'hawken'
returned
342 results.
|
S. Hawken , right hand, percussion lock, notched for breechplug, by L&R
We offer our Thomas Gibbons style S. Hawken cap lock pre-notched for our #Plug-LR-16-3 breech plug and tang. On receipt of this lock, plug, and tang, you will notice that the notch is about .010” too shallow at the bottom, not bad for an “as cast” fit. Two or three swipes with the rounded side of a fine cut file will provide the needed clearance at
|
|
Kit Carson's Hawken 1" Slant Breech & Tang, left hand, 3/4-16 thread
Our popular Kit Carson's Hawken left hand plug matches our right plug. Annealed tang may be bent cold. Made with .550" deep thread engagement, with a direct drilled ignition hole. Pre-inlet into our left hand Kit Carson's Hawken stock. Threaded 3/4-16 for 1" octagon barrel. Apply anti-seize compound to threads, before installation. We recommend Bir
|
|
Hawken 15/16" slant faced breech & tang, 5/8-18 thread, by L&R
This cleverly designed slant faced plug and tang by L&R Lock Co. is threaded 5/8-18 with .650" thread journal length, and .500" thread engagement for strength. The powder chamber is .315" diameter, ending in a large flash channel which is gently angled to the nipple seat. Most important, the plug and tang mating surfaces are machined flat, for a s
|
|
|
Hawken 1" slant faced breech & tang, 3/4-16 thread, by L&R
This cleverly designed slant faced plug and tang by L&R Lock Co. is threaded 3/4-16 with .690" thread journal length, and .500" thread engagement for strength. The powder chamber is .375" diameter, ending in a large flash channel which is gently angled to the nipple seat. Most important, the plug and tang mating surfaces are machined flat, for a s
|
|
Kit Carson's Hawken 1" slant breech & tang, 3/4-16 thread
Our popular Kit Carson's Hawken right hand plug matches our left plug. Annealed tang may be bent cold. Made with .612" deep thread engagement, with a direct drilled ignition hole. Pre-inlet into our Kit Carson's Hawken stock. Threaded 3/4-16 for 1" octagon barrel. Apply anti-sieze compound to threads, before installation. We recommend Birchwood Cas
|
|
Peep Rear Sight, adjustable, to fit Thompson Center, Lyman Deerstalker, Lyman Trade Rifle, and similar Hawken rifles
This blued sight, with two eye disks, is easily installed on Thompson Center, Lyman Deerstalker, Lyman Trade Rifle, and similar Hawken rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Small 5/8" diameter knurled disk is drilled .040". Large 1/2" diameter knurled d
|
|
Rear sight , semi-buckhorn up to 1-1/8" barrels, Jim Bridger's Hawken style
This large version of our Kit Carson's Hawken rifle sight is intended for a barrel up to 1-1/8" octagon and is ideal for our Jim Bridger Hawken rifle parts. Tall, to reduce heat mirage, the center notch is indicated. Wax cast steel, made in the U.S.A., the dovetail is about .370" long and .625" wide. Dovetail to a depth of .050". Height from the bo
|
|
Triggerguard, Hawken Rifle , sand cast brass
Made with a larger, longer grip rail, this sand cast version of the famous Hawken triggerguard has lugs for mounting pins, for use with longrifle style double set triggers. You can modify this guard to mount it with screws, to a long Hawken trigger plate. Overall length is 9-1/8", inside trigger bow is 2-1/4" long, and 1-1/2" deep.
|
|
Triggerguard, Hawken Rifle , sand cast nickel silver
Made with a larger, longer grip rail, this sand cast version of the famous Hawken triggerguard has lugs for mounting pins, for use with longrifle style double set triggers. You can modify this guard to mount it with screws, to a long Hawken trigger plate. Overall length is 9-1/8", inside trigger bow is 2-1/4" long, and 1-1/2" deep.
|
|
Triggerguard, T/C Hawken Half-Stock , wax cast steel
A classic late Hawken triggerguard for half-stock rifles. Designed to be screwed in place rather than mounted in a traditional Hawken fashion. Order two of our un-plated screw-6x1/2, #SCREW-6x12, to retain this triggerguard. Overall length is 7-5/8", inside trigger bow is 2-1/2" long, and 1-5/16" deep.
|
|
Hawken Toeplate , "beaver tail" finial, iron
This toeplate has a beavertail finial, used on Hawken, Dimick, and Plains rifles. For use on non-inlet stock. This does not fit our pre-inlet Hawken stocks. Toeplate width at widest point is 0.75"
|
|
Wedge Key , for Hawken & Deerstalker rifle, blued steel, by InvestArm
Wedge Key , for replica Hawken or Deerstalker rifle, blued steel, by InvestArm of Italy. Length under the head is 1.35", thickness is 0.120", width is 0.370". Same day shipment, when you click ADD TO CART and complete shopping cart check out. Inspect the item, return it for same day refund if not delighted. You will be pleased with your choice. Yo
|
|
Gunsmithing Labor : mill dovetail and fit adjustable Hawken rear sight
Prompt service : Our gunsmith will mill a dovetail for your Hawken adjustable rear sight, or underlug, using a milling machine and dovetail cutter and hand fit the sight with rizer. When you buy the sight from us we remover parting lines, and hand fit the sight with rizer to the dovetail slot, ready for you to finish and use. Many of our rear sigh
|