Barrel liner for .45-70 Trapdoor, .450" bore, .458" groove, 1-22" twist, 3 grooves, 5/8" OD, price per inch, order the quantity in inches you require with a minimum of eight inches. Liner for .45-70 Trapdoor, .450" bore, .458" groove, 1-22" twist, 3 grooves, 5/8" OD. Priced per inch with a minumum of eight inches. Barrel liners are hammer forged of special Chromium Molybdenum alloy steel. Made in the U.S.A. each liner is hammer forged over a mandrel, producing an extremely smooth and uniform bore of the desired dimensions. Bar       LINER-45-70-T . . . $9.49

Barrel liner for .45 Auto, .444" bore, .452" groove, 1-16" twist, 6 grooves, 5/8" OD, price per inch, order the quantity in inches you require with a minimum of eight inches. Liner for .45 Auto, .444" bore, .452" groove, 1-16" twist, 6 grooves, 5/8" OD. Priced per inch with a minumum of eight inches. Barrel liners are hammer forged of special Chromium Molybdenum alloy steel. Made in the U.S.A. each liner is hammer forged over a mandrel, producing an extremely smooth and uniform bore of the desired dimensions. Barrel lin       LINER-45-ACP . . . $9.49

Barrel liner for .45 Long Colt, .446" bore, .454" groove, 1-18" left twist, 6 grooves, 5/8" OD, price per inch, order the quantity in inches you require with a minimum of eight inches. Liner for .45 Long Colt, .446" bore, .454" groove, 1-18" left hand twist, 6 grooves, 5/8" OD. Priced per inch with a minumum of eight inches. Barrel liners are hammer forged of special Chromium Molybdenum alloy steel. Made in the U.S.A. each liner is hammer forged over a mandrel, producing an extremely smooth and uniform bore of the desired dimensi       LINER-45-LC . . . $9.49

Barrel liner for .45 Colt, .446" bore, .454" groove, 1-18" left twist, 6 grooves, .800" OD, price per inch, order the quantity in inches you require with a minimum of eight inches. Liner for .45 Colt, .446" bore, .454" groove, 1-18" left hand twist, 6 grooves, .800" OD. Priced per inch with a minumum of eight inches. Barrel liners are hammer forged of special Chromium Molybdenum alloy steel. Made in the U.S.A. each liner is hammer forged over a mandrel, producing an extremely smooth and uniform bore of the desired dimensions.       LINER-45-LCX . . . $9.69

Barrel liner for .45 round ball, .460" bore, .476" groove, 1-48" twist, 7 grooves, 11/16" OD, price per inch, order the quantity in inches you require with a minumum of eight inches. Liner for .45 round ball, .460" bore, .476" groove, 1-48" twist, 7 grooves, _11/16"_ OD. Priced per inch with a minumum of eight inches. Barrel liners are hammer forged of special Chromium Molybdenum alloy steel. Made in the U.S.A. each liner is hammer forged over a mandrel, producing an extremely smooth and uniform bore of the desired dimensions.       LINER-45-ML-1 . . . $9.49

Barrel liner for .50-70 Gov't, .500" bore, .510" groove, 1-20" twist, 6 grooves, 11/16" OD, price per inch, order the quantity in inches you require with a minimum of eight inches. Liner for .50-70 Gov't, .500" bore, .510" groove, 1-20" twist, 6 grooves, 11/16" OD. Priced per inch with a minumum of eight inches. Barrel liners are hammer forged of special Chromium Molybdenum alloy steel. Made in the U.S.A. each liner is hammer forged over a mandrel, producing an extremely smooth and uniform bore of the desired dimensions. Barr       LINER-50-70 . . . $9.69

Barrel liner for .50 cal. bullet, .500" bore, .522" groove, 1-20" twist, 6 grooves, 11/16" OD, price per inch, order the quantity in inches you require with a minimum of eight inches. Liner for .50 for bullet, .500" bore, .522" groove, 1-20" twist, 6 grooves, 11/16" OD. Priced per inch with a minumum of eight inches. Barrel liners are hammer forged of special Chromium Molybdenum alloy steel. Made in the U.S.A. each liner is hammer forged over a mandrel, producing an extremely smooth and uniform bore of the desired dimensions. Ba       LINER-50-ML-1 . . . $9.69

Barrel liner for .50 round ball, .510" bore, .532" groove, 1-48" twist, 7 grooves, 11/16" OD, price per inch, order the quantity in inches you require with a minimum of eight inches. Liner for .50 round ball, .510" bore, .532" groove, 1-48" twist, 7 grooves, 11/16" OD. Priced per inch with a minumum of eight inches. Barrel liners are hammer forged of special Chromium Molybdenum alloy steel. Made in the U.S.A. each liner is hammer forged over a mandrel, producing an extremely smooth and uniform bore of the desired dimensions. Ba       LINER-50-ML-2 . . . $9.29

Enfield Rifle Lock , circa 1853 Crown P-H mark, unused, excellent Made for use on an 1853 Enfield Rifle Musket, this new lock has been drilled for two lock bolts, but never tapped, never installed on a replica Enfield three band rifled musket. Probably made after 1979 for a replica of the Enfield Musket issued to the East India Company, the lock is finished to a dark blue. The hammer and lock plate are engraved w       LOCK-ENFIELD . . . $79.99

Golden Age Percussion Conversion Lock, by Jim Chambers A true conversion, this percussion lock retains the pan molding, flash fence, and hole for frizzen pivot screw. Converted original locks often have an empty hole, or tap the hole and plug it with a screw. Parts and screws are the same as on the flint lock, except for the cap lock’s unique plate, pan bolster, and the percussion hammer. This is a fin       LOCK-GA-CR . . . $245.00

Fly Detent , right hand, tempered steel, for Ron Long style locks by R. E. Davis Fly Detent , right hand, tempered steel. Fits our #LOCK-JB-R percussion Hawken lock. Fits our #LOCK-LEMAN-CL-R percussion H. E. Leman lock (when a fly detent is fitted). Fits our #LOCK-AH-R percussion Alexander Henry English Sporting Rifle lock. Fits our #LOCK-GG-LR percussion Joseph Golcher lock, with large hammer for percussion bolster. Fits our       LOCK-JB-R-FL . . . $11.99

Lock, H. E. Leman Indian Trade Rifle , percussion, right hand, copied from Track's antique, using Ron Long's best Hawken style internal parts made in the U.S.A. by R. E. Davis Henry Eicholtz Leman, Lancaster, Pennsylvania, was a prolific gun maker, one of the first longrifle makers to adopt factory production techniques. H. E. Leman used this style lock on “trade rifles" offered to the wholesale trade. These rifles were then resold by merchants and traders to westbound emigrants traveling down the Ohio River to Saint Lou       LOCK-LEMAN-CL-R . . . $149.00

S. Hawken right hand, percussion lock, by L&R Sam Hawken and other makers used these locks on Plains rifles, Ohio rifles and late longrifles, during the later percussion era of 1845 to 1885. Thomas Gibbons of St. Louis made and signed many locks. Note the square inside corner at the front of the lock plate, and the normal narrow percussion hammer, both late features. Fitted with a fly detent f       LOCK-LR-100 . . . $175.00

M. Medina Hawken right hand, percussion lock, by L&R This L&R Lock Company M. Medina Hawken percussion lock was designed by the late Don Stith. Notice the early style rounded front edge vs. the square corner found on later locks. The lock plate also has a bit more curve from end to end than later percussion locks. The percussion hammer has cast-in engraving with a 1.8" throw. The lock plate is 4.5" l       LOCK-LR-100-M . . . $160.00

S. Hawken , right hand, percussion lock, notched for breechplug, by L&R We offer our Thomas Gibbons style S. Hawken cap lock pre-notched for our #Plug-LR-16-3 breech plug and tang. On receipt of this lock, plug, and tang, you will notice that the notch is about .010” too shallow at the bottom, not bad for an “as cast” fit. Two or three swipes with the rounded side of a fine cut file will provide the needed clearance at       LOCK-LR-125 . . . $175.00

S. Hawken left hand, percussion lock, by L&R Sam Hawken and other makers used these locks on Plains rifles, Ohio rifles and late longrifles, during the later percussion era of 1845 to 1885. Thomas Gibbons of St. Louis made and signed many locks. Note the square inside corner at the front of the lock plate, and the normal narrow percussion hammer, both late features. Fitted with a fly detent f       LOCK-LR-200 . . . $175.00

Ohio Squirrel Cap Lock , right hand, percussion lock, by R. E. Davis This late percussion lock has engraving cast into the surface of the hammer and plate, decorated with ‘S’ and ‘C’ scrolls and leaves in classic style. The leaves open to a clearing at front, revealing a bushy tailed squirrel on the limbs of a tree. An example of American folk art circa 1853, from a rifle by O. B. VanDenBurgh, Findlay, Hancock Count       LOCK-SQ-CL-RH . . . $155.00

Drum drilling tool , alignment jig, for drilling nipple threads Install a percussion powder drum on your new rifle barrel, and be assured of perfect alignment. Using this drilling jig is very quick and easy. No file fitting is required to index the nipple to correctly engage the hammer. Never use a washer or shim under your powder drum. Install one of our drums and use this tool to locate and install the nipple       TOOL-DRUM . . . $15.99

Antique Belt Pistol , .58 caliber, 7" swamped barrel, percussion conversion lock, checkered walnut, iron trim This antique percussion conversion belt pistol has a French influence with a neatly checkered grip. This pistol has a .58 caliber rifled swamped octagon barrel. The bore is bright and has been well maintained. The stock is solid and does not show any cracks or repairs. The pistol was original finished as a flint lock, which was later converted to p       AAV-048 . . . $1,759.00

J&S HAWKEN pistol , .54 caliber, 9" barrel, percussion, checkered walnut stock, single set trigger, used, by Paolo Bondini This replica J&S HAWKEN pistol, was made by Paolo Bondini, during the 1970 - 1980 period, and is not often seen today. The percussion lock is polished Armory bright, factory engraved, and boldly marked with the J&S HAWKEN name. The factory metal ramrod has a swivel yoke to prevent loss. The walnut grip is checkered and the brass furniture was silve       AAW-391 . . .

Rocky Mountain Hawken Rifle , .54 caliber, 34" barrel, percussion, curly maple, color case hardened iron, used, by Davide Pedersoli This percussion Rocky Mountain Hawken half-stock rifle was manufactured by Davide Pedersoli & Co . The rifle is stocked in curly maple, trimmed in traditional iron furniture with color case hardened finish. This rifle is used with only a few small marks on the stock and finish from firing and leaning. Weighing in at 10.4 pounds the rifle has a tri       AAW-421 . . .

English Fowler , 16 gauge, 34" octagon-to-round barrel, percussion, checkered walnut, iron trim, used This attractive gun is an excellent reproduction of a mid 19th century era halfstock English Fowler. Shaped from a highly figured piece of black walnut and trimmed in browned iron furniture, this gun features a 16 gauge tapered octagon-to-round barrel. The R.E. Davis Alexander Henry percussion bar lock is neatly engraved. This smoothbore is used wi       AAW-422 . . .

Hawken Rifle , .54 caliber, 34-1/4" Sharon barrel, R.E. Davis percussion lock, iron trim, maple, new, unfired, by George Nelson Stocked in maple, this classic percussion halfstock Hawken rifle is trimmed with traditional Hawken iron furniture. The 34-1/4" Sharon barrel and iron trim are finished to a dark brown. A classic Hawken hooked breech and two wedge keys retain the straight octagon barrel allowing instant take-down, for easy cleaning. This rifle was assembled by cont       AAW-424 . . . $2,999.99

California Fullstock Rifle .50 caliber, 26" barrel, Claro walnut, brass, L&R percussion lock, step adjustable rear sight, used This California style fullstock is based upon an example shown in the book California Gunsmiths 1846 - 1900 by L. P. Sheldon. This rifle is stocked in Claro walnut and trimmed in brass furniture with nickel silver accents and a steel forend cap. The rifle is fitted with hooked breech, L&R percussion lock, and single trigger. Unfired, the rifle is f       AAW-432 . . . $1,999.00

T/C Hawken Rifle , .54 caliber, 28" barrel, percussion, walnut stock, brass trim, excellent, by Thompson Center Arms This .54 caliber Thompson Center Hawken percussion rifle is very lightly used. This factory finished rifle is stocked in American black walnut with brass furniture, and blued 28" straight octagon barrel. The bore is bright and has been well maintained. Weight is 8.8 pounds, and with a trigger reach of 14-1/4", the rifle is perfectly setup for today       AAW-442 . . .

has been added to your .

---