Track's Best Flint Flush Cleaning Tool , for breeches up to 1-7/16", without spillage Black Powder residue can bleach and etch your gun stock finish. Our tool allows proper flushing, without spillage. Thoroughly clean your flint gun, and flush the breech, without removing your vent liner. Simply remove your flint lock. Install the clamp, with the O-Ring centered over the vent. Place the bottom nozzle in a container of water. Add onl       FLUSH-FLINT . . . $32.99

Short Starter, patch & ball starter, with 3/8" hickory rod for .40 to .45 caliber. Known as a Short Starter or ball starter, use the small stud to bump the lubricated patch and ball into the muzzle, to engrave the rifling. Use the longer rod to start the ball, then use your ramrod. Use short strokes of your ramrod to seat the ball on the powder charge. Avoid grasping the ramrod high above the muzzle, which may flex the rod to the       ST-6 . . . $8.99

Short Starter, patch & ball starter, 7/16" hickory rod for .50 caliber. Known as a Short Starter or ball starter, use the small stud to bump the patch and ball into the muzzle, to engrave the rifling. Use the longer rod to start the ball, then use your ramrod. Use short strokes of your ramrod to seat the ball on the powder charge. Avoid grasping the ramrod high above the muzzle, which may flex the rod to the breaking p       ST-7 . . . $9.99

Short Starter, patch & ball starter, 1/2" wooden rod for .54 and larger calibers. Known as a Short Starter or ball starter, use the small stud to bump the patch and ball into the muzzle, to engrave the rifling. Use the longer rod to start the ball, then use your ramrod. Use short strokes of your ramrod to seat the ball on the powder charge. Avoid grasping the ramrod high above the muzzle, which may flex the rod to the breaking p       ST-8 . . . $9.99

Short Starter, patch & ball starter, 5/16" brass rod for .32 to .38 caliber. Known as a Short Starter or ball starter, use the small stud to bump the patch and ball into the muzzle, to engrave the rifling. Use the longer rod to start the ball, then use your ramrod. Use short strokes of your ramrod to seat the ball on the powder charge. Avoid grasping the ramrod high above the muzzle, which may flex the rod to the breaking p       ST-5 . . . $8.99

Ramrod for Davide Pedersoli's Frontier, Blue Ridge, or Hatfield longrifle in .45, .50, or larger caliber , 9mm (.35") stained hickory, 39" long. cylindrical brass tip threaded 10-32 at front and rear. Ramrod for Davide Pedersoli's Frontier, Blue Ridge, or Hatfield longrifle in .45, .50, or larger caliber , 9mm (.35") stained hickory, 39" long. cylindrical brass tips threaded 10-32 at front and rear. Order a 3/8" cleaning jag, such as #JS-50-6-10 or other caliber. Not for use on Pedersoli .32 caliber rifles. Small caliber rifles require our 5/       RAMROD-390-DP-F . . . $34.99

Ramrod for a Hatfield longrifle in .45, .50, or larger caliber , 9mm (.354") stained hickory, 38-3/4" long. with brass tips threaded 10-32 at front and rear. Made in the USA by Track of the Wolf, Elk River, Minnesota. We turn the brass tips and assemble the ramrod. Ramrod for Hatfield longrifle in .45, .50, or larger caliber , 9mm (.354") stained hickory, 38-3/4" long. with brass tips threaded 10-32 at front and rear. Made by Track of the Wolf, in Elk River, Minnesota. We turn the brass tips and assemble the ramrod. Order a cleaning jag, such #JS-45-6-10 or #JS-50-6-10 or other caliber. Not for Davide Pede       RAMROD-386-HATFIELD . . . $34.99

Ramrod Worm , 10-32 female thread, for cleaning muskets, removing patches, cards, wads, steel, fits military ramrod Our steel ramrod worm has two tines. The female thread is made to fit the Model 1863 Remington "Zouave" Rifle, Springfield Rifled Musket, Italian made Harper's Ferry 1803 Rifle, Mississippi Rifle, and most other steel ramrods on imported military replica muskets. Used primarily to pull patches, wads, and cards, this worm is ideal for use on guns wi       WORM-US . . . $9.99

Flint Rifle & Musket Tool , hand forged knapping hammer, vent pick, turnscrew, patch worm, and rod extension Copied from an original, this hand-forged flint rifleman's combination tool is hardened and tempered, ideal for the French & Indian War or Revolutionary War re-enactor. Made to serve the Davide Pedersoli Brown Bess or Springfield or Charleville Musket, the forged blade tightens the top jaw screw. You can easily change flints on your Brown Bess flin       TOOL-COMBO . . . $42.59

Build Track's Jacob Dickert , Lancaster County, Pennsylvania longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $1,084.80 Build Track's Jacob Dickert Lancaster kit, easy to assemble, up to 42" octagon barrel, traditional brass, or iron trim, plain or fancy maple stock We offer these fine Lancaster County style parts, modeled after the work of Jacob Dickert. Arriving from Germany to America about 1750, he studied under a unknown master learning the gunmakers art. He

J.P Gunstocks Lancaster County Longrifle .54 caliber, 42" Green Mountain barrel, maple, brass, L&R Durs Egg lock, used, by Jim Searles This longrifle was made by Jim Searles of J.P. Gunstocks and offered as the "Lancaster model", but it has a bit more of a Lehigh Valley style. The rifle is stocked in curly maple and trimmed in polished brass furniture. The Green Mountain barrel is fitted to a L&R Durs Egg lock, and R.E. Davis double set triggers. Trigger reach is 14-1/4" to fit a       AAW-436 . . . $999.00

Kentucky Pistol , .54 caliber, 10-3/8" barrel, flintlock, maple stock, brass trim, as new with box, by Davide Pedersoli This attractive Kentucky pistol has a large grip, angled enough to provide perfect sight alignment, while it feels good in your hand. Manufactured by Davide Pedersoli & Company of Italy. The pistol is as-new with the factory box. The frizzen only has a few strikes on it from testing. Stocked in curly maple, the stock has scattered figure from muzzl       AAW-406 . . . $749.00

Build Track's 1792 Contract flintlock longrifle parts set, with 15/16" octagon barrel in .50, or .54 caliber Price: starting at $858.32 It is believed that the Model 1792 Contract Rifle was quite possibly the rifle issued to the Lewis & Clark expedition from the Harper's Ferry Arsenal for the Expedition of Discovery. Based on research in Man at Arms magazine by Frank A. Tait, and American Military Shoulder Arms by George Moller, a better picture of the 1792 Contract rifle has b

Ramrod Tip with Covered Ball Puller Worm , for 5/16" ramrod , brass base and cover, fancy tapered antique style ball puller screw, with sharp tip of tempered steel This brass base is designed for use on a 5/16" ramrod. It is ideal for use on the hidden end of a tapered shotgun ramrod. You will need to turn the end of the rod down to 1/4" then glue and cross drill and pin the tip in place. The base and knurled cap are .300" diameter, slightly under 5/16" to easily enter a 5/16" ramrod pipe and ramrod hole. The       RT-CW-5 . . . $10.99

Ramrod Tip with Covered Ball Puller Worm , for 3/8" ramrod , brass base and cover, fancy tapered antique style ball puller screw, with sharp tip of tempered steel This brass base is designed for use on a 3/8" ramrod. It is ideal for use on the hidden end of a tapered rifle, fowler, or shotgun ramrod. You will need to turn the end of the rod down to 5/16" then glue and cross drill and pin the tip in place. The base and knurled cap are .365" diameter, slightly under 3/8" to easily enter a 3/8" ramrod pipe and       RT-CW-6 . . . $10.99

Ramrod Tip with Covered Ball Puller Worm , for 7/16" ramrod , brass base and cover, fancy tapered antique style ball puller screw with sharp tip of tempered steel This brass base is designed for use on a 7/16" ramrod. It is ideal for use on the hidden end of a tapered large bore rifle or shotgun ramrod. You will need to turn the end of the rod down to 3/8" then glue and cross drill and pin the tip in place. The base and knurled cap are .425" diameter, slightly under 7/16" to easily enter a 7/16" ramrod pipe       RT-CW-7 . . . $10.99

Build Track's John Armstrong , Maryland longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $1,124.25 Build Track's John Armstrong Maryland longrifle parts set, easy to assemble, up to 42" octagon barrel, traditional brass or iron trim, plain or fancy maple stock Many schools of style exist for Maryland longrifles. The Emmitsburg school turned out many fine rifles thanks to the skills of makers such as John Armstrong, Peter White, and George Nune

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 8-32 female thread to fit metal ramrod Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 8-32 male thread will fit your metal ramrod end, on military rifle, if it has 8-32 threads. You can easily enlarge the hole and tap it to fit a 12-24 ramrod tip for an 1803 Harper's Ferry Rifle, or other popular metal rod. The extra length will gi       BP-1817-08-F . . . $10.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 10-32 female thread to fit metal ramrod Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 10-32 male thread will fit your metal ramrod end, on your Brown Bess, Springfield, Charleville, or Zouave musket, if it has 10-32 threads. You can easily enlarge the hole and tap it to fit a 12-24 ramrod tip for an 1803 Harper's Ferry Rifle, or ot       BP-1817-10-F . . . $12.99

Build Track's Jim Bridger's Hawken rifle , right hand, 1-1/8" tapered octagon barrel Price: starting at $1,125.16 Build Track's Jim Bridger's Hawken Rifle kit, 1-1/8" tapered octagon 36" barrel, traditional iron, or fancy brass trim, maple stock Track's very best Jim Bridger's Hawken Rifle parts were selected by the well respected gunmaker, Michael Hayes of Park Rapids, MN, who built the fine rifle with tapered octagon barrel, shown above. Stocked in curly

Build Track's Classic Tennessee longrifle kit , in traditional iron, or brass, with 13/16" octagon barrel in .36, .40, or .45 caliber Price: starting at $981.95 Build Track's Classic Tennessee longrifle, easy to assemble rifle kit, 36 or 42" octagon barrel, traditional iron, plain or fancy maple stock Often referred to as a Tennessee style, this attractive South Mountain percussion longrifle is trimmed in iron, and stocked in plain maple. Original Tennessee flint rifles were often equipped with imported

Build Track's Colonial Longrifle parts set, with 13/16", 7/8", or 15/16" straight octagon barrel Price: starting at $953.50 These parts have been specially chosen to replicate a fine early longrifle, typical of those made during and after our Revolutionary War. This set is now shown with wax castings which are much easier to clean-up than sand castings. Our default barrel choice is a quality U.S. made straight octagon barrel blank with other manufacturers barrels availa

Build Track's Classic Tennessee longrifle kit , in traditional iron, with 13/16" straight octagon barrel Price: starting at $1,067.66 Build Track's Classic Tennessee longrifle, easy to assemble rifle kit, 36 or 42" octagon barrel, traditional iron, plain or fancy maple stock Often referred to as a Tennessee style, this attractive South Mountain flint lock longrifle is trimmed in iron, and stocked in plain maple. Original Tennessee flint rifles were often equipped with imported

Build Track's John & Caleb Vincent, Ohio halfstock rifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $926.81 An 1840 - 1860 vintage Ohio halfstock rifle, in the style of John and Caleb Vincent, signed by talented gunsmith J. Eddie Brown. The highly figured maple stock has been stained to best reveal the stripe and figure. The figure and the reddish undertone combine to make this rifle very appealing to the eye. The classic Vincent style scroll surrounding

Build Track's J. P. Beck Lebanon Township parts set with "B" or "C" profile, 44" swamped barrel, cut for sliding wood patchbox Price: starting at $1,256.59 Build Track's John Philip Beck Lebanon Township, Lancaster, Pennsylvania, 44" swamped barrel, traditional brass or iron trim, plain, or fancy maple stock with sliding wood patchbox We offer these fine Lebanon Township, Lancaster County style parts, modeled after the work of John Philip Beck. Lebanon township is located just to the north of Lancas

has been added to your .

---