Powder drum , 1/2" diameter, 3/8-24 thread, not drilled for nipple Powder drum, 1/2" diameter, 3/8-24 thread, not drilled for nipple       DRUM-8-6-F-N . . . $4.59

Powder drum , 9/16" diameter, 5/16-24 thread, not drilled for nipple, square shank end in the style of H.E. Leman Powder drum, 9/16" diameter, 5/16-24 thread, not drilled for nipple, square shank end in the style of H.E. Leman       DRUM-9-5-F-SQ . . . $6.99

Powder drum , 12.5mm diameter, 10-1.25mm thread, drilled for 6-1mm nipple Powder drum, 12.5mm diameter, 6-1mm thread, drilled for 6-1mm nipple       DRUM-CVA . . . $6.99

Powder drum , 12.5mm diameter, 10-1.25mm thread, not drilled for nipple Powder drum, 12.5mm diameter, 6-1mm thread, not drilled for nipple       DRUM-CVA-N . . . $5.99

Powder drum , 13mm diameter, 8-1.25mm thread, drilled for nipple 1/4-28 thread Powder drum, 13mm diameter, 8-1.25mm thread, drilled for nipple 1/4-28 thread for Davide Pedersoli Kentucky rifle.       DRUM-DP . . . $9.99

Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, #11 CCI cap, stainless steel Cone length: 0.475" Thread journal length: 0.275" Overall length: 0.750" Diameter of base: 0.370" Nipple, 5/16-18 thread, for English mfg. Parker Hale Enfield musket, #11 CCI cap, stainless steel Cone length: 0.475" Thread journal length: 0.275" Overall length: 0.750" Diameter of base: 0.370"       ERS-S . . . $7.99

Nipple , .260-24 thread for antique Maynard Carbine, musket cap, hardened steel, 1/4" square lug Cone length: 0.470" Thread journal length: 0.200" Overall length: 0.670" Diameter of base: 0.345" Nipple , .260-24 thread for antique Maynard Carbine, musket cap, hardened steel, 1/4" square lug       MM-MAYNARD-I . . . $7.99

Nipple , 5/16-24 thread, for Navy Arms Hurricane Hawken Rifle , #11 CCI cap, stainless steel Cone length: 0.470" Thread journal length: 0.160" Overall length: 0.630" Diameter of base: 0.306" Nipple , 5/16-24 thread, for Navy Arms Hurricane Hawken Rifle , #11 CCI cap, stainless steel       MRHH-S . . . $7.99

Nipple Wrench for Rifles , short style, with slotted end Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! Our most popular wrench, light enough to fit in your po       NW-160 . . . $9.99

Nipple , 6-.75mm metric thread, for some pre-1980 imported replica percussion revolvers by A.S.M or Uberti, often marked FIE. May be too short for later producion percussion revolvers, #11 CCI cap, hardened steel Cone length: 0.275" Thread journal length: 0.225" Overall length: 0.500" Diameter of base: 0.307" Nipple , 6-.75mm metric thread, for some pre-1980 imported replica percussion revolvers by A.S.M. or Uberti with metric threads often marked FIE. May be too short for later producion percussion revolvers, #11 CCI cap, hardened steel       PIR-EI . . . $4.99

Nipple , 6-.75mm metric thread, for some pre-1980 imported replica percussion revolvers by A.S.M. or Uberti, often marked FIE. May be too short for later producion percussion revolvers, #11 CCI cap, stainless steel Cone length: 0.275" Thread journal length: 0.225" Overall length: 0.500" Diameter of base: 0.307" Nipple , 6-.75mm metric thread, for some pre-1980 imported replica percussion revolvers by A.S.M. or Uberti with metric threads often marked FIE. May be too short for later producion percussion revolvers, #11 CCI cap, stainless steel       PIR-ES . . . $4.99

Nipple , 6-.75mm metric thread, .300" long cone for some FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, #11 CCI cap, hardened steel Cone length: 0.300" Thread journal length: 0.225" Overall length: 0.525" Diameter of base: 0.307" Nipple, 6-.75mm metric thread, for FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, #11 CCI cap, hardened steel       PIR-I . . . $4.99

Nipple , 6-.75mm metric thread, .319" long cone for most FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, fits Pietta 1873 Colt Percussion, #11 CCI cap, hardened steel Cone length: 0.319" Thread journal length: 0.225" Overall length: 0.544" Diameter of base: 0.307" Nipple , 6-.75mm thread, .319" long cone for most FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, #11 CCI cap, hardened steel       PIR-LI . . . $4.99

Nipple , 6-.75mm metric thread, .319" long cone for most FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, fits Pietta 1873 Colt Percussion, #11 CCI cap, stainless steel Cone length: 0.319" Thread journal length: 0.225" Overall length: 0.544" Diameter of base: 0.307" Nipple , 6-.75mm thread, .319" long cone for most FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, #11 CCI cap, stainless steel       PIR-LS . . . $4.99

Nipple , 6-.75mm metric thread, .300" long cone for some FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, #11 CCI cap, stainless steel Cone length: 0.300" Thread journal length: 0.225" Overall length: 0.525" Diameter of base: 0.307" Nipple , 6-.75mm metric thread, .300" long cone for FAP - Pietta Remington, Pietta Colt, Pietta Le Mat replica revolvers, #11 CCI cap, stainless steel       PIR-S . . . $4.99

Nipple , 6-.75mm metric thread, for some early imported replica percussion revolvers, will likely be too short for current reproduction revolvers, #11 CCI cap, stainless steel Cone length: 0.260" Thread journal length: 0.225" Overall length: 0.485" Diameter of base: 0.307" Nipple , 6-.75mm metric thread, for some early imported replica percussion revolvers, will likely be too short for current reproduction revolvers, #11 CCI cap, stainless steel       PIR-TS . . . $4.99

Breech Plug with integral nipple for later production Thompson Center Scout Carbine, Rifle, or Pistol, fits No. 11 CCI cap. Made in the U.S.A. of 416 stainless steel. Breech Plug with integral nipple, for Thompson Center Scout carbine, rifle, or pistol, to fit No. 11 CCI cap. The vent holes are designed to "index" and align exactly with the vent holes in your T/C Scout frame. Made in the USA, of 416 alloy Martensitic (hardenable) stainless steel. TC part number 7231 This breech plug will fit the Thompson Center       PLUG-TC-SCOUT-11 . . . $18.99

Breech Plug with integral nipple for early production Thompson Center Scout Carbine, Rifle, or Pistol, fits No. 11 CCI cap. Made in the U.S.A. of 416 stainless steel. Breech Plug with integral nipple, for early production Thompson Center Scout carbine, rifle, or pistol, to fit No. 11 CCI cap. This is the earlier production style and has a much shorter length and does not have the integral vent holes found on the later examples. We do not have a serial number cut-off for the design change. Made in the USA, of 416       PLUG-TC-SCOUT-EP-11 . . . $18.99

Nipple , 6-.75mm metric thread, for Lyman Great Plains Rifle, Trade Rifle & InvestArm rifles, musket cap, stainless steel, requires a well centered hammer cup! Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307" Nipple , 6-.75mm metric thread, for Lyman Great Plains Rifle, Trade Rifle & InvestArm rifles, musket cap, stainless steel, requires a well centered hammer cup!       RLP-MS . . . $7.99

Oversize threaded nipple, .255-28, 1/4-28 with .005" oversize thread, for CCI#11 cap, stainless steel Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307" #ROS-05-S nipple has 1/4-28 +.005" threads. .636" overall length, .200" thread journal length, .235" cone height, .208" wrench flats .309" body diameter       ROS-05-S . . . $6.99

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel Cone length 0.440" Overall length: 0.635" Thread journal length: 0.195" Diameter of base: 0.307" Standard nipple, 1/4-28 thread, for #11 cap, stainless steel       RST-S . . . $4.99

Nipple, .220-32 thread, for #11 CCI cap, square shank, stainless steel for Amazonas shotgun Cone length: 0.493" Thread journal length: 0.160" Overall length: 0.653" Diameter of base: 0.302" Nipple, .220-32 thread, tapered cone for CCI brand No. 11 cap, square shank, 416 stainless for Amazonas shotgun, made in the USA       S-AMAZONAS-S . . . $7.99

Cards & wads for muzzle loading shotguns Our muzzleloading wads are full bore diameter. Most modern wads are made undersize, to fit within a paper or plastic cartridge case. Specify the gauge and wad or card type: "A" card: .125" thick, over powder, waterproof, to seal the powder charge. 1000 per bag. "B" card: .025" thick over shot card, to h

Muzzle loading rifle barrels, IBS by Green Mountain for T/C Hawken Green Mountain Interchangeable Rifle Barrels : Order a target ready round ball barrel for your Thompson Center Hawken Rifle. These rifle barrels are completely assembled, with the breech plug, lug, rib, pipes and adjustable sights installed. All barrels are blued, and include a new ramrod. Nipples are included.. Interchangeable 15/16" octagon barr

Nipple , 6-1mm metric thread, for CVA rifles and shotguns, Traditions, Jukar, and other Spanish mfg. guns, musket cap, stainless steel, requires a well centered hammer cup! Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"       CVA-MS . . . $7.99

has been added to your .

---