Items Per Page:
|< First < Previous Viewing page 10 of 14 Next > Last >|
1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | 10  | 11  | 12  | 13  | 14
 Investarms Great Plains Rifle Kit , .50 caliber, 32" barrel, right hand, percussion, new, unfired Investarms Great Plains Rifle Kit , .50 caliber, 32" barrel, right hand, percussion, new, unfired
The Plains Rifle was carried across the Great Plains, by western pioneers and fur trappers. It was the culmination of years of firearms development. The Investarms Great Plains Rifle is similar to rifles built by the famous Saint Louis rifle makers, Samuel Hawken, Gemmer, and Horace E. Dimick to the meet the demands of experienced backwoodsmen. Th
    Out of Stock, request notification when available.   INV-GPR-50-P-R-K . . . $569.00

 Investarm Great Plains Rifle , .54 caliber, 32" barrel, 1 in 60" twist for round ball, right hand, percussion, factory new in-the-box, unfired Investarm Great Plains Rifle , .54 caliber, 32" barrel, 1 in 60" twist for round ball, right hand, percussion, factory new in-the-box, unfired
The Plains Rifle was carried across the Great Plains, by western pioneers and fur trappers. It was the culmination of years of firearms development. The Investarms Great Plains Rifle is similar to rifles built by the famous Saint Louis rifle makers, Samuel Hawken, Gemmer, and Horace E. Dimick to the meet the demands of experienced backwoodsmen. St
    In Stock   INV-GPR-54-P-R . . . $679.00

 Flash Guard Screw & Nut for Investarms: Bridger, Gemmer, Hawken flintlocks, Lyman Great Plains Rifle. 3.5-.6mm thread, inside mounting screw with square nut. Flash Guard Screw & Nut for Investarms: Bridger, Gemmer, Hawken flintlocks, Lyman Great Plains Rifle. 3.5-.6mm thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a Investarms produced Lyman Great Plains Rifle flintlock requires a longer frizzen screw with a nut to mount a flash guard. This same lock and screw is used on the Lyman Trade Rifle and Deerstalker, Investarms: Hawken, Bridger Hawken, Gemmer Hawken, and older Cabela's Hawken. Installation of a iron or brass flash
    In Stock   LOCK-GPR-F-FGX . . . $6.99

 Fly Detent , right hand, tempered steel, for Ron Long style locks by R. E. Davis Fly Detent , right hand, tempered steel, for Ron Long style locks by R. E. Davis
Fly Detent , right hand, tempered steel. Fits our #LOCK-JB-R percussion Hawken lock. Fits our #LOCK-LEMAN-CL-R percussion H. E. Leman lock (when a fly detent is fitted). Fits our #LOCK-AH-R percussion Alexander Henry English Sporting Rifle lock. Fits our #LOCK-GG-LR percussion Joseph Golcher lock, with large hammer for percussion bolster. Fits our
    In Stock   LOCK-JB-R-FL . . . $11.99

 Flash Guard Screw & Nut for J. Kibler's Colonial flintlocks, 8-32 thread, inside mounting screw with square nut. Flash Guard Screw & Nut for J. Kibler's Colonial flintlocks, 8-32 thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a J. Kibler's Colonial flintlock requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire v
    Item is currently sold out.   LOCK-JKC-FGX . . . $6.99

 Flash Guard Screw & Nut for J. Kibler's Ketland flintlocks, 6-40 thread, inside mounting screw with square nut. Flash Guard Screw & Nut for J. Kibler's Ketland flintlocks, 6-40 thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a J. Kibler's Ketland flintlock, used on the Southern Mountain rifle, requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, wher
    In Stock   LOCK-JKK-FGX . . . $6.99

 Lock, H. E. Leman Indian Trade Rifle , percussion, right hand, copied from Track's antique, using Ron Long's best Hawken style internal parts made in the U.S.A. by R. E. Davis Lock, H. E. Leman Indian Trade Rifle , percussion, right hand, copied from Track's antique, using Ron Long's best Hawken style internal parts made in the U.S.A. by R. E. Davis
Henry Eicholtz Leman, Lancaster, Pennsylvania, was a prolific gun maker, one of the first longrifle makers to adopt factory production techniques. H. E. Leman used this style lock on “trade rifles" offered to the wholesale trade. These rifles were then resold by merchants and traders to westbound emigrants traveling down the Ohio River to Saint Lou
    Item is currently sold out.   LOCK-LEMAN-CL-R . . . $149.00

 Ketland late conversion cap lock, by R. E. Davis Ketland late conversion cap lock, by R. E. Davis
Build an early percussion longrifle, or converted flint Tennessee or late longrifle using our late Ketland cap lock. This “conversion" lock interchanges with our late Ketland flint lock. If you are planning a gun with interchangeable ignition, we recommend fitting the percussion lock first, to insure a good fit of the drum to the lock plate. The pl
    In Stock   LOCK-LK-C . . . $159.99

English Durs Egg - London right Percussion Conversion Lock, by L&R English Durs Egg - London right Percussion Conversion Lock, by L&R
Durs Egg - London right Percussion Conversion Lock Best quality London made flint locks were often converted to percussion, during the 1825 - 1840 transition period. This nice percussion lock has the plate style of an earlier flint lock, with a notch for a 7/16" powder drum and nipple. A fly detent prevents the sear from snagging the half-cock n
    In Stock   LOCK-LR-1500 . . . $175.00

 1830 era small rifle, or pistol percussion lock , right hand, by L&R 1830 era small rifle, or pistol percussion lock , right hand, by L&R
1780 era rifle or pistol percussion lock, right hand, by L&R New competition for the small Siler lock, L&R’s new flat faced lock is for use on American, English, or French longrifles or pistols and would be typical of a lock from the he 1760-1800 era that was converted circa 1830 to percussion. This lock is made to fit the small Siler lock morti
    In Stock   LOCK-LR-1830 . . . $175.00

 Classic conversion , right hand, percussion lock, by L&R Classic conversion , right hand, percussion lock, by L&R
L&R's new Classic cap lock is a true conversion. The pan is still evident on the lock plate. The pan molding and flash fence have been retained, and the pan groove has been enlarged to accept a 1/2" diameter powder drum and nipple. L&R's new conversion lock is made to be a tight fit in the Siler lock mortise, and is a tiny bit larger, with a longer
    In Stock   LOCK-LR-2200 . . . $175.00

 Mule Ear or Sideslapper right hand, percussion lock, by L&R Mule Ear or Sideslapper right hand, percussion lock, by L&R
The L&R Mule Ear or Sideslapper percussion lock design allows the percussion nipple to be mounted directly into the barrel. Pull the hammer outboard to cock the lock. Unlike some mule ear locks this lock has both a half cock and full cock position on the tumbler. The lock plate is 5.1" long by 0.94" tall. The tumbler is fitted with a fly detent to
    In Stock   LOCK-LR-2500 . . . $175.00

English Durs Egg - London left Percussion Conversion Lock, by L&R English Durs Egg - London left Percussion Conversion Lock, by L&R
Durs Egg - London left Percussion Conversion Lock Best quality London made flint locks were often converted to percussion, during the 1825 - 1840 transition period. This nice percussion lock has the plate style of an earlier flint lock, with a notch for a 1/2" powder drum and nipple. A fly detent prevents the sear from snagging the half-cock not
    In Stock   LOCK-LR-3500 . . . $175.00

English Bar Lock right Percussion Lock, with early flat hammer, by L&R English Bar Lock right Percussion Lock, with early flat hammer, by L&R
English Bar right Percussion Lock, with early flat hammer The English “bar" lock is so-called because it uses a “drip bar" soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used
    In Stock   LOCK-LR-500 . . . $175.00

English Bar Lock right Percussion Lock, with Express hammer, by L&R English Bar Lock right Percussion Lock, with Express hammer, by L&R
English Bar right Percussion Lock, with Express hammer The English “bar" lock is so-called because it uses a “drip bar" soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used “bar
    In Stock   LOCK-LR-500-S . . . $175.00

 Schuetzen right hand, percussion lock, by L&R Schuetzen right hand, percussion lock, by L&R
A classic late Germanic style percussion lock, with smooth curves all around the lock plate. The front of the plate is long enough to allow using two lock bolts, although one lock bolt is more typical in this late percussion era. The hammer has a long throw to reach the nipple on nearly any hooked or solid patent breech. The highly styled gargoyle
    In Stock   LOCK-LR-575 . . . $175.00

English Bar Lock left Percussion Lock, with early flat hammer, by L&R English Bar Lock left Percussion Lock, with early flat hammer, by L&R
English Bar left Percussion Lock, with early flat hammer The English “bar” lock is so-called because it uses a “drip bar” soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used “b
    In Stock   LOCK-LR-600 . . . $175.00

English Bar Lock left Percussion Lock, with Express hammer, by L&R English Bar Lock left Percussion Lock, with Express hammer, by L&R
English Bar Lock left Percussion Lock, with Express hammer The English “bar” lock is so-called because it uses a “drip bar” soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used
    In Stock   LOCK-LR-600-S . . . $175.00

 Bedford County right hand, percussion lock, by L&R Bedford County right hand, percussion lock, by L&R
Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l
    In Stock   LOCK-LR-BED-P . . . $175.00

 Flash Guard Screw & Nut for large Siler, deluxe Siler, & Golden Age flintlocks, 8-32 thread, inside mounting screw with square nut. Flash Guard Screw & Nut for large Siler, deluxe Siler, & Golden Age flintlocks, 8-32 thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a large Siler, deluxe Siler, Jim Chamber''s Golden Age, and Gunmaker's flintlock requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enact
    In Stock   LOCK-SL-FK-FGX . . . $6.99

 Ohio Squirrel Cap Lock , right hand, percussion lock, by R. E. Davis Ohio Squirrel Cap Lock , right hand, percussion lock, by R. E. Davis
This late percussion lock has engraving cast into the surface of the hammer and plate, decorated with ‘S’ and ‘C’ scrolls and leaves in classic style. The leaves open to a clearing at front, revealing a bushy tailed squirrel on the limbs of a tree. An example of American folk art circa 1853, from a rifle by O. B. VanDenBurgh, Findlay, Hancock Count
    Item is currently sold out.   LOCK-SQ-CL-RH . . . $155.00

 Flash Guard Screw & Nut for small Siler flintlocks, 6-40 thread, inside mounting screw with square nut. Flash Guard Screw & Nut for small Siler flintlocks, 6-40 thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a small Siler flintlock requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire volleys sh
    In Stock   LOCK-SS-FK-FGX . . . $6.99

 Flash Guard Screw & Nut for Thompson Center flintlocks, 6-40 thread, inside mounting screw with square nut. Flash Guard Screw & Nut for Thompson Center flintlocks, 6-40 thread, inside mounting screw with square nut.
The inside mounted frizzen screw on a Thompson Center flintlock requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire volley
    In Stock   LOCK-TC-FGX . . . $6.99

 Plan drawing , full exact size, on 36 x 60" bond paper, tips and hints for assembly, to build our John Armstrong Longrifle Plan drawing , full exact size, on 36 x 60" bond paper, tips and hints for assembly, to build our John Armstrong Longrifle
This plan drawing illustrates a John Armstrong longrifle. The plans notes some variations in decoration, with additional notes on assembly. Flint shown, drum and nipple percussion ignition is discussed. The John Armstrong, Emmitsburg, Maryland longrifle you build can be as handsome as it is accurate! Use our detailed drawing, with tips and hints fo
    In Stock   PLAN-ARMSTRONG . . . $9.99

 Plan drawing , full exact size, tips and hints for assembly, to build our Early Tennessee Rifle Plan drawing , full exact size, tips and hints for assembly, to build our Early Tennessee Rifle
Many variations in Tennessee and "poor boy" rifles exist, and this style is a favorite of the artist, This plan drawing illustrates our early Tennessee longrifle parts. The plans notes some variations in trim, and techniques for omitting certain pieces of the furniture. Flint and drum and nipple percussion ignition is shown. The Tennessee rifle you
    In Stock   PLAN-EARLY-TENNESSEE . . . $9.99
|< First < Previous Viewing page 10 of 14 Next > Last >|
1  | 2  | 3  | 4  | 5  | 6  | 7  | 8  | 9  | 10  | 11  | 12  | 13  | 14
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2025Track of the Wolf, Inc.
Accepted Credit Cards