H.E. Leman Indian Trade Rifle Breechplug , 5/8--18 threads for 15/16 or 1" octagon barrel This breechplug is tapered and flared with a rounded end. Patterned from a Indian Trade Rifle by H.E. Leman this breech plug is designed to fit a 15/16" octagon barrel with 5/8-18 threads and is ideal for calibers up to .54. The tang is just under 2" in length, and has a through hole located for the tang bolt. Wax cast of malleable 8620 steel, made       PLUG-LEMAN-16-5 . . . $20.99

Thompson Center hooked breech plug , flint, for 1" octagon barrel, special 11/16-20 thread to fit T/C barrel Make a new barrel assembly for your flint lock Thompson Center Hawken, or Renegade rifle. Our hook matches your tang, with very little file fitting required. Thompson Center does not sell their plugs as a spare part, so we offer these nearly identical plugs for your use. Made in the U. S. A. by Green Mountain Barrel Company. We have a limited supp       PLUG-TCF-16-11 . . . $49.99

Flint Hawken style plug & tang for 13/16 & 7/8" barrels, 5/8-18 threads Malleable steel, the tang may be straightened or bent cold. X-ray inspected for internal flaws. The short .500" thread depth allows a very strong thread engagement when seated to the inside shoulder. It requires flash hole liner for flint use, or a powder drum for percussion use, each sold separately. The powder chamber is .285" diameter, to permit       PLUG-FH-14-5 . . . $40.99

Flint Hawken style plug & tang for 15/16 & 1" barrels, 3/4-16" threads Malleable steel, the tang may be straightened or bent cold. X-ray inspected for internal flaws. The short .500" thread depth allows a very strong thread engagement when seated to the inside shoulder. It requires flash hole liner for flint use, or a powder drum for percussion use, each sold separately. The powder chamber is .26" diameter, to permit       PLUG-FH-16-3 . . . $44.99

Flint Hawken style plug & tang for 15/16 & 1" barrels, 5/8-18 threads Malleable steel, the tang may be straightened or bent cold. X-ray inspected for internal flaws. The short .500" thread depth allows a very strong thread engagement when seated to the inside shoulder. It requires flash hole liner for flint use, or a powder drum for percussion use, each sold separately. The powder chamber is .26" diameter, to permit       PLUG-FH-16-5 . . . $44.99

Beavertail Breechplug , 3/4-16 threads for 1" octagon barrel, ideal for Hawken or Southern Mountain rifles Beavertail long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains as well as Hawken rifles. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 1" octagon barrel. It is very slightly oversize at top and bottom flat,       PLUG-BT-16-3 . . . $24.99

Tennessee lollipop Breech Plug , 5/8-18 thread, for 13/16" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 13/16" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to       PLUG-TN-13-5 . . . $24.99

Tennessee lollipop Breech Plug , 9/16-18 thread, for 13/16" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 13/16" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to       PLUG-TN-13-9 . . . $24.99

Tennessee Lollipop Breech Plug , 5/8-18 thread, for 7/8" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 7/8" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to ma       PLUG-TN-14-5 . . . $24.99

Tennessee Lollipop Breech Plug , 9/16-18 thread, for 7/8" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 7/8" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to ma       PLUG-TN-14-9 . . . $24.99

Tennessee lollipop Breech Plug , 5/8-18 thread, for 15/16" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 15/16" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to       PLUG-TN-15-5 . . . $24.99

Tennessee Lollipop Breech Plug , 3/4-16 thread, for 1" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 1" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to matc       PLUG-TN-16-3 . . . $24.99

Tennessee Lollipop Breech Plug , 5/8-18 thread, for 1" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 1" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to matc       PLUG-TN-16-5 . . . $24.99

Kentucky Pistol , .54 caliber, 7-1/2" octagon-to-round barrel, Siler flintlock, curly maple, Georgian style silver furniture, as-new This Kentucky pistol is stocked in curly maple that displays swirls of figure over the length of the stock. This pistol is trimmed in neatly fitted sterling silver Georgian style furniture. A few Colonial American makers produced pistols with Georgian style furniture, such as J.P. Beck from Lancaster, Pennsylvania. The sterling silver furniture has       AAW-354 . . . $2,199.00

Henry E. Leman ~ Lancaster, Pennsylvania , .54 caliber, 34" Rice barrel, L&R late English flintlock, curly maple, brass, new, by Mike Sullivan Perhaps the most famous of the Lancaster makers, Henry Eicholtz Leman (also spelled Lehman early in his career), created a factory to produce arms for westbound settlers. This flint longrifle has 1830 era Lancaster County style architecture and furniture, and is modeled after Henry Leman's earlier work. This rifle was assembled by contemporary buil       AAW-338 . . .

Track's Best Flint Flush Cleaning Tool , for breeches up to 1-7/16", without spillage Black Powder residue can bleach and etch your gun stock finish. Our tool allows proper flushing, without spillage. Thoroughly clean your flint gun, and flush the breech, without removing your vent liner. Simply remove your flint lock. Install the clamp, with the O-Ring centered over the vent. Place the bottom nozzle in a container of water. Add onl       FLUSH-FLINT . . . $32.99

French Trade Pistol , .62 caliber smoothbore, 13-1/2" barrel, L&R flintlock, walnut, brass trim, new, unfired, by T. Frasier Neatly assembled by contemporary builder T. Frazier this pistol is a commercial trade pistol circa the early 1730's with a French Dragoon pistol influence. The 1731 and 1732 era French Dragoon pistols used 15-1/2" barrels, when in 1733 the length was reduced to 12". Weight of the pistol is 3 pounds and it fits comfortably into the average size ma       AAU-821 . . . $2,499.00

French Trade Pistol , .54 caliber smoothbore, 12" barrel, L&R flintlock, walnut, brass trim, new, unfired, by T. Frasier Neatly assembled by contemporary builder T. Frazier this pistol is a commercial trade pistol circa the late 1720' to 1730's with a French Dragoon pistol influence. The 1731 and 1732 era French Dragoon pistols used 15-1/2" barrels, when in 1733 the length was reduced to 12". Weight of the pistol is 3 pounds and it fits comfortably into the average       AAU-882 . . . $2,699.00

Kentucky Pistol , .50 caliber, 10" octagon-to-round barrel, small Siler flintlock, walnut, Georgian style brass furniture, by Ken Brady This Kentucky pistol is stocked in black walnut, with a warm brown tone. This pistol is trimmed in brass Georgian style furniture that appears to be from the late William Kennedy. A few Colonial American makers produced pistols with Georgian style furniture, such as J.P. Beck from Lancaster, Pennsylvania. The brass furniture has a hand burnished to       AAW-142 . . . $2,749.00

Kentucky Pistol .50 caliber 10-1/2" tapered barrel, small Siler flint lock, curly maple, engraved brass trim, signed by R.W. Deitz This Kentucky pistol is stocked in curly maple, stained to a golden brown. The brass furniture has a hand burnished appearance with engraved accents and nicely compliments the tone of the stock. The tapered octagon barrel is finished to a dark brown, while the small Siler flintlock has a temper blue finish. This pistol is unfired and has only a few       AAW-147 . . . $2,699.00

Great Plains Rifle Drop-in Barrel Assembly , .45 caliber, 1-48" twist, 15/16" octagon, 32" length, blued, includes tang, flintlock ignition for Lyman Great Plains, Investarm Gemmer Hawken Investarms drop-in barrel , .45 caliber with 1-48" twist for a patched round ball. 15/16" octagon by 32" length. Flintlock ignition for Investarms produced Lyman Great Plains rifles and Investarms Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, th       BBL-45-C-GPR-32-BF . . . $299.00

Great Plains Rifle Drop-in Barrel Assembly , .50 caliber, 1-60" twist, 15/16" octagon, 32" length, blued, includes tang, flintlock ignition for Lyman Great Plains, Investarm Gemmer Hawken Investarm drop-in barrel , .50 caliber with 1-60" twist for a patched round ball. 15/16" octagon by 32" length. Flintlock ignition for Investarm produced Lyman Great Plains rifles and Investarms Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, this       BBL-50-C-GPR-32-BF . . . $299.00

Great Plains Rifle Drop-in Barrel Assembly , .54 caliber, 1-60" twist, 15/16" octagon, 32" length, blued, includes tang, flintlock ignition for Lyman Great Plains, Investarm Gemmer Hawken Investarm drop-in barrel , .54 caliber with 1-60" twist for a patched round ball. 15/16" octagon, 32" length. Flintlock ignition for Investarm produced Lyman Great Plains rifles and Investarm Gemmer Hawken and Plains rifles. The barrel, plug, adjustable rear sight, blade front sight, rib, rod pipes, and underlug are blued. Fully assembled, this ni       BBL-54-C-GPR-32-BF . . . $299.00

Belt Pistol .42 caliber, 7-3/4" barrel, L&R John Bailes flintlock, patina finished iron trim, maple, used, signed by J. Turpin This belt pistol is stocked in curly maple, stained to a dark brown with golden highlights to best display the figure. The iron furniture and barrel are finished to gray brown patina. The L&R John Bailes flintlock is finished to a dark brown. This slender pistol does have a patch to repair a ramrod channel break through. The barrel is signed by con       AAV-867 . . .

Early Colonial Longrifle , .50 caliber, 42" swamped Rice barrel, flintlock, curly maple, engraved brass trim, new, unfired, by Robert Faddis This pre-Revolutionary flintlock longrifle is assembled in the style of Colonial American rifles assembled with furniture from a earlier European rifle. The engraving and carving have a late 17th to mid-18th century baroque style. This rifle features a .50 caliber swamped Rice barrel mated to a Jim Chambers deluxe Siler flintlock. Trimmed in brass       AAW-377 . . . $4,699.00

has been added to your .

---