Your search for 'barrels'
returned
1,183 results.
|
Plan drawing , exact full size on 36 x 60" bond paper, full color photo, tips and hints for assembly, to build our Bedford County longrifle
These slim longrifles are unique to the Bedford County area, where they were made from the flint era until the 1880's, long after the advent of cartridge rifles. Neatly drawn and dimensioned, with some tips to aid assembly. Tthese plans will allow you to replicate a Bedford County longrifle, using our L&R Bedford flint or percussion lock, stock, ba
|
|
Plan drawing , full exact size, U.S. 1814 Harper's Ferry Rifle
These fine rifles were hand made to a standard pattern. Three variations are known. The later 1814 variation is more common, and is discussed in the plans. We offer all the castings for all three versions, molded directly from original rifle parts. Using our parts you can restore your fine original rifle, or make a correct replica using our shaped
|
|
Plan drawing , full exact size, John Vincent & Son longrifle
Neatly drawn and dimensioned, our full scale drawing will simplify assembly of a classic John Vincent & Son longrifle. John Vincent worked in Barlow Township, Washington County Ohio in the mid to late 19th century and his son continued into the early 20th century. Both John Vincent and his son J. Caleb Vincent made rifles with a distinctive style.
|
|
Breech Plug , flared tang, 5/8-18 thread, for 13/16" or 7/8" octagon
Breech Plug , flint style, flared tang, 5/8-18 thread, for 13/16" or 7/8" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.
|
|
|
Breech Plug , flared tang, 9/16-18 thread, for 13/16" or 7/8" octagon
Breech Plug , flint style, flared tang, 9/16-18 thread, for 13/16" or 7/8" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.
|
|
|
Breech Plug , flared tang, 3/4-16 thread, for 15/16" or 1" octagon
Breech Plug , flint style, flared tang, 3/4-16 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.
|
|
|
Breech Plug , flared tang, 5/8-18 thread, for 15/16" or 1" octagon
Breech Plug , flint style, flared tang, 5/8-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.
|
|
|
Breech Plug , flared tang, 9/16-18 thread, for 15/16" or 1" octagon
Breech Plug , flint style, flared tang, 9/16-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.
|
|
|
Breech Plug , flared tang, 3/4-16 thread, for 1-1/8" octagon
Breech Plug , flint style, flared tang, 3/4-16 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 2-1/4" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.
|
|
Kit Carson's Hawken 1" Slant Breech & Tang, left hand, 3/4-16 thread
Our popular Kit Carson's Hawken left hand plug matches our right plug. Annealed tang may be bent cold. Made with .550" deep thread engagement, with a direct drilled ignition hole. Pre-inlet into our left hand Kit Carson's Hawken stock. Threaded 3/4-16 for 1" octagon barrel. Apply anti-seize compound to threads, before installation. We recommend Bir
|
|
Flint Hawken 1" slant faced breech & tang, 3/4-16 thread
This well made slant faced flint plug and tang is threaded 3/4-16 with .625" thread journal engagement for strength. The powder chamber is drilled .375" diameter, over one inch deep, to the center of the octagon extension. The tang sweeps up to the wood, at both rear corners. Ideally suited for use with L&R's #LOCK-LR-900 right flintlock, or #LOCK-
|
|
Kit Carson's Hawken 1" slant breech & tang, 3/4-16 thread
Our popular Kit Carson's Hawken right hand plug matches our left plug. Annealed tang may be bent cold. Made with .612" deep thread engagement, with a direct drilled ignition hole. Pre-inlet into our Kit Carson's Hawken stock. Threaded 3/4-16 for 1" octagon barrel. Apply anti-sieze compound to threads, before installation. We recommend Birchwood Cas
|
|
Breech plug, straight tang , 9/16-18 thread, for 3/4" octagon
Breech Plug , flint style, straight tang, 9/16-18 thread, for 3/4" octagon, made in the USA, milled steel. Tang is about 3" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
|
Breech plug, straight tang , 5/8-18 thread, for 13/16" or 7/8" octagon
Breech Plug , flint style, straight tang, 5/8-18 thread, for 13/16" or 7/8" octagon, made in the USA, milled steel. Tang is about 3" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.
|
|
|
Breech plug, straight tang , 9/16-18 thread, for 13/16" or 7/8" octagon
Breech Plug , flint style, straight tang, 9/16-18 thread, for 13/16" or 7/8" octagon, made in the USA, milled steel. Tang is about 3" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
|
Breech plug, straight tang , 3/4-16 thread, for 15/16" or 1" octagon
Breech Plug , flint style, straight tang, 3/4-16 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
|
Breech plug, straight tang , 5/8-18 thread, for 15/16" or 1" octagon
Breech Plug , flint style, straight tang, 5/8-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
|
Breech plug, straight tang , 9/16-18 thread, for 15/16" or 1" octagon
Breech Plug , flint style, straight tang, 9/16-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
|
Breech plug, straight tang , 3/4-16 thread, for 1-1/8" octagon
Breech Plug , flint style, straight tang, 3/4-16 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
|
Breech plug, straight tang , 7/8-14 thread, for 1-1/8" octagon
Breech Plug , flint style, straight tang, 7/8-14 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.
|
|
Nipple primer , brass, for percussion guns
This tiny flask dispenses priming powder directly into the nipple, to clear a mis-fire. It must be filled with very finely granulated black powder. This small flask is 3-5/16" long with a 1/2" diameter. If you do not have FFFFg priming powder available, place one-half teaspoon of FFg or FFFg into a saucer. Press the spoon with your thumb, and gentl
|