Sharon Hawken new internal lock parts, by L&R The Sharon Rifle Barrel Co., Kalispell, Montana, made a popular Hawken rifle kit, which uses a L&R lock that appears identical to our #LOCK-LR-100. The plate, hammer, bridle, sear spring, and all screws are the same. However, internal parts of old locks are different! DANGER: Sharon kits have L&R locks with old style tumbler, sear, link, pin, main       LOCK-LR-UPGRADE . . . $120.00

Small Queen Anne pistol Flint Lock, by Jim Chambers Sometimes called the small Queen Anne pistol lock, this flint lock is smaller than Siler's small lock. The rounded plate, pan, and the elegant cock are of London’s best style, popular from 1730 to 1770. Perfect for use on an early holster pistol, target pistol, a pair of dueling pistols, or a small caliber flint longrifle, use this small lock with       LOCK-SQA-FR . . . $320.00

Solid Brass Pin Stock Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.

Solid Brass Pin Stock , 1/16" diameter, 6" length Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.       PIN-1/16-B . . . $1.29

Solid Brass Pin Stock , 3/32" diameter, 6" length Brass pin stock may be used to secure rod pipes and barrel lugs to the gun stock. We prefer to use 3/32" steel dowel pins for pinning the barrel, and trigger. Brass pins are also useful in knife building.       PIN-3/32-B . . . $1.29

Plan Drawing , full exact size, with tips for assembly, Hawken fullstock flintlock rifle This large blueprint details construction of Track's early Hawken fullstock rifle with a 1" straight octagon barrel. Use our detailed drawing, with tips and hints for assembly to avoid mistakes. We offer pre-inlet stocks, locks, barrels and all the castings needed to build this rifle, in several popular variations.       PLAN-HAWKEN-FULLSTOCK . . . $9.99

Plan drawing , full exact size, with tips for assembly, Jaeger rifle Full scale blueprint drawing of an American style "Jaeger" rifle. This transitional piece is shown with our 31" swamped Jaeger barrel, and our matching pre-inlet stock. Except for the length, it is identical in construction and design to our "Edward Marshall" pre-inlet stock using our 37" swamped barrel. Very similar to the early rifles made at the       PLAN-JAEGER . . . $9.99

Plan Drawing , full exact size, with tips for assembly, Kit Carson Hawken percussion halfstock rifle This large blueprint details construction of Track's Kit Carson Hawken halfstock rifle with a 1" straight octagon barrel. Use our detailed drawing, with tips and hints for assembly to avoid mistakes. We offer pre-inlet stocks, locks, barrels and all the castings needed to build this rifle, in several popular variations.       PLAN-KIT-CARSON . . . $9.99

Jim Bridger's Hawken 1-1/8" breech & tang , 3/4-16 thread This 1-1/8" Hawken plug was designed by Green River Rifle Works. The tang may be bent cold. X-ray inspected for internal flaws. The short .550" thread journal allows a strong engagement and a direct drilled ignition hole. We recommend using our Jim Bridger's Hawken lock with this plug. Pre-inlet into our Jim Bridger's Hawken stock, this is our firs       PLUG-JB-18-3 . . . $79.99

Breech plug, straight tang , 3/4-16 thread, for 15/16" or 1" octagon, .550" journal length Breech Plug , flint style, straight tang, 3/4-16 thread, with .550" journal length, for 15/16" or 1" octagon. Made in the USA, milled steel. Tang is about 3-1/8" length. This special plug with .550" thread length, is pre-cut to the exact length required by our 20 or 24 gauge, and .54, or .58 caliber rifled octagon-to-round barrel. Bend the tang to       PLUG-ST-16-3-R . . . $12.99

Rear Sight Blank , wax cast steel Wax cast steel, this sight blank is made in the U.S.A. The dovetail is .360" long, .560" wide. Height from the bottom of the dovetail to the top of the sight notch is 0.50". The base is a full .100" deep. We do NOT recommend cutting the slot .100" deep in your barrel. Cut a .050" slot depth (not over .062" deep), and allow the base to stand above t       RS-B-1 . . . $8.99

Hand Stamp for British Proof Mark , Birmingham Proof for post 1813, hardened steel, made in the USA, by Track of the Wolf, Inc. The Birmingham proof mark was used post 1813 for proofing black powder barrels. Typically placed below the view mark on the off flat of the breech. We have examined this stamp on Trade Guns by both Barbar, and Sharpe. Due to the large size of this stamp it can only be used on octagon barrels that are 1-1/8" or larger. The inspector's mark is about       STAMP-BPC-1813 . . . $29.99

Hand Stamp for Northwest Gun , Edward Bond's inspection mark for Hudson's Bay Company Northwest Trade Gun, hardened steel, made in the USA, by Track of the Wolf, Inc. The tombstone with a Sitting Fox over E.B. was used by Edward Bond to mark Hudson's Bay Company Trade Guns on both the locks and barrel. The top flat of the barrel was marked approximately 1" from the breech. The lock was marked on the plate ahead of the cock. This "Sitting Fox" logo was derived from the top of the HB Co. logo. The inspector's mark       STAMP-EB . . . $29.99

Hand Stamp for Northwest Gun , Sitting Fox in a Circle Northwest Trade Gun, hardened steel, made in the USA, by Track of the Wolf, Inc. The Sitting Fox in a circle for use on a NorthWest Trade Gun on both the locks and barrel. The top flat of the barrel was marked approximately 1" from the breech. The lock was marked on the plate ahead of the cock. The inspector's mark is about .4" in diameter, and the tool body is 2-1/2" length, 1/2" diameter, brightly polished steel, hardened to       STAMP-FC . . . $29.99

Triggerguard Classic English Style , wax cast steel A classic English triggerguard from a London made half-stock fowling gun or sporting rifle. The scroll-loop grip rail was used in the late flint and early percussion era. The bow is large enough for two triggers, but was intended for a single barrel gun. The English rarely used double set triggers, but was popular on German and American rifles. The       TG-ENG-2-I . . . $35.00

Vent, Touch Hole Liner , 6-.75mm thread, stainless steel, slotted for easy removal for Investarms produced Lyman Great Plains, Trade, & Deerstalker rifles Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 6-.75mm, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen jo       THL-LYMAN-S . . . $5.99

Vent, Touch Hole Liner , 1/4-28 thread, stainless steel, slotted for easy removal Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 1/4-28, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen joi       THL-S4S . . . $4.99

Vent, Touch Hole Liner , 5/16-24 thread, stainless steel, slotted for easy removal Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 5/16-24, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen jo       THL-S5S . . . $4.99

Vent, Touch Hole Liner , for Thompson Center flintlock rifles, 1/4-28 thread, stainless steel, slotted for easy removal Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Threaded 1/4-28, made in the USA, stainless steel, slotted for easy removal. Concave inside, this vent liner brings the main powder charge very close to the incandescent heat of the priming flash. Position the vent on the center of the pan, slightly above the pan to frizzen joi       THL-TCF . . . $5.99

Vent, Touch Hole Liner complete kit with drill & tap , 5/16-32 thread, stainless steel, White Lightnin' Flash Hole Liner, often called a vent, vent liner, or touch-hole liner. Known as the White Lightnin' vent, the special 5/16-32 fine threads allow an extra large concave cavity inside, for use on 13/16" to 1" octagon barrels. Made in the USA, stainless steel, with removable lug for easy installation. Concave inside, this vent liner brings the main p       THL-W5S-KIT . . . $33.57

Underlug for key, milled steel, .750" dovetail, slotted for key Our UL-NW-3 is sloted for our No. 58 key. Milled steel, the flat base is .465" wide, by .750" long, with a large surface for a good solder joint, if desired. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. The slot is 0.93" tall by 0.42" long (square the slot to use the full width). M       UL-NW-3 . . . $3.29

Underlug for pin, milled steel, .750" dovetail Our UL-NW-4 is a bit longer, to fill old dovetails, or to slot for your key. Milled steel, the flat base is .465" wide, by .750" long, with a large surface for a good solder joint, if desired. The base is .050" thick, ideal for thin wall barrels. The blade is 0.075" thick and stands 0.19" above the base. Most rifles will use three underlugs, while       UL-NW-4 . . . $2.99

Underlug blank , for Thompson Center & similar rifles Our UL-TC-H underlug blank is made for the T/C Hawken, Renegade, and other similar rifles. We use these to replace lost lugs on the CVA Mountain Rifle, Big Bore, Hawken, Frontier and similar rifles. Strangely, CVA lug slots tend to be loose. This lug has a longer base than the CVA, which allows a perfect fit. When adapting our Green Mountain drop-i       UL-TC-H . . . $5.59

Bedding compound , Acraglas Epoxy Gel, by Brownell's Experienced gunsmiths may prefer Brownell's Acraglas Gel epoxy bedding compound. Not really thicker than the liquid, but rather it is a gel, which stays where you put it. Try this new gel formula on your next gun repair, or target rifle barrel bedding project. You mix the resin gel, hardener, pigment, and glass fiber, as needed, per Brownell's in       ACRAGEL . . . $29.99

Bedding compound , Acraglas Epoxy Gel, by Brownell's , non-flammable for export Experienced gunsmiths may prefer Brownell's Acraglas Gel epoxy bedding compound. Not really thicker than the liquid, but rather it is a gel, which stays where you put it. Try this new gel formula on your next gun repair, or target rifle barrel bedding project. You mix the resin gel, hardener, pigment, and glass fiber, as needed, per Brownell's in       ACRAGEL-EX . . . $29.99

has been added to your .

---