Pack of 12 English Gun flints , 1-1/8 x 1-1/4", Brown Bess, Grice, Tower, Springfield. We are temporarily limiting purchase of this item to one twelve pack per order. We will manually edit your order if your order exceeds that amount. Military muskets often work best with this size flint. Try this size in your Grice, Stowe, or Tower marked Brown Bess. Many original military locks such as the Springfield 1816 and later variations work best with this size. Pull your gun to half cock. Check and see if it will clear the 1-1/8" width and 1-1/4" length? The finest natural flint occurs       FLINT-ENG-9-PACK-12 . . . $42.00

Gun case, fringed brown suede leather, accepts rifles up to 53" long, made in USA Our sturdy 53" leather gun case is made of heavy brown American sueded leather, machine sewn with double seams, reinforced for strength, with a overlapping flap closure and ties. Our 53" gun case will fit most Hawken and fur trade era halfstock rifles, with barrels up to 38" length. Made in the U.S.A.       GUN-CASE-53 . . . $66.99

Gun case, fringed brown suede leather, accepts rifles up to 58" long, U.S.A. Our sturdy leather gun case is made of heavy brown American sueded leather, machine sewn with double seams, reinforced for strength, with an overlapping flap closure and ties. Our 58" gun case will fit most longrifles and fowling guns with barrels up to 42" length. Made in the U.S.A.       GUN-CASE-58 . . . $75.99

Gun case, fringed brown suede leather, accepts rifles up to 58" long, U.S.A. This is a used gun case, but in very nice condition Our sturdy leather gun case is made of heavy brown American sueded leather, machine sewn with double seams, reinforced for strength, with an overlapping flap closure and ties. Our 58" gun case will fit most longrifles and fowling guns with barrels up to 42" length. Made in the U.S.A.       GUN-CASE-58-USED . . . $59.00 Closeout

Military Holster, left hand, brown leather, C.S. marked flap Our Military style holster has a large top flap, embossed with "CS", to completely cover your Colt or Remington .44 Army or .36 Navy revolver. Stitched along the cut edge, with belt loop for any belt up to 3" width. A brass stud holds the closure strap. We use the conventional "butt to rear" side designation. Order a right holster if you wish to we       HOLSTER-CS-L . . . $29.99

Military Holster, right hand, brown leather, C.S. marked flap Our Military style holster has a large top flap, embossed with "CS", to completely cover your Colt or Remington .44 Army or .36 Navy revolver. Stitched along the cut edge, with belt loop for any belt up to 3" width. A brass stud holds the closure strap. We use the conventional "butt to rear" side designation. Order a right holster if you wish to we       HOLSTER-CS-R . . . $29.99

Holster, modern hunting style, 7-1/2" barrel, brown leather, fits 1851 or 1860 Colt revolvers Russet oiled finished cowhide. Safety straps help prevent the firearm from falling out. Neatly stitched with finished edges, the front strap reinforces the belt loop. Heavy duty snaps lock securely. Barrel end is sewn. Right hand draw only. Fits 1851 or 1860 Colt revolvers with barrels up to 7-1/2" long. Note: it is very common for the 1860 revolve       HOLSTER-M-C . . . $31.99

Military Holster, left hand, brown leather, plain flap Our military style holster has a large top flap to completely cover your percussion Colt or Remington .44 Army or .36 Navy revolver with up to 8" barrel. Stitched along the cut edge, with belt loop for any belt up to 3" width. A brass stud holds the closure strap. We use the conventional "butt to rear" side designation. Order a right holster if you       HOLSTER-MO-L . . . $29.99

Holster, right hand military, brown leather, plain flap Our military style holster has a large top flap to completely cover your percussion Colt or Remington .44 Army or .36 Navy revolver with up to 8" barrel. Stitched along the cut edge, with belt loop for any belt up to 3" width. A brass stud holds the closure strap. We use the conventional "butt to rear" side designation. Order a right holster if you       HOLSTER-MO-R . . . $29.99

Holster, modern hunting style, brown leather, fits 1858 Remington Russet oiled finished cowhide. Safety straps help prevent the firearm from falling out. Neatly stitched with finished edges, the front strap reinforces the belt loop. Heavy duty snaps lock securely. Barrel end is sewn. Right hand draw only. Fits 1858 Remington. Our brown leather holster has been hand rubbed with natural oil. Maintain it with Neatsf       HOLSTER-M-R . . . $31.99

Holster, modern hunting style, 9" barrel, brown leather, fits Colt Walker or Dragoon revolvers Russet oiled finished cowhide. Safety straps help prevent the firearm from falling out. Neatly stitched with finished edges, the front strap reinforces the belt loop. Heavy duty snaps lock securely. Barrel end is sewn. Rear loop will accept belts up to 3" wide. Right hand draw only. Fits Colt Walker or Dragoon revolvers. Revolver not included. Our       HOLSTER-M-W . . . $31.99

Holster , right hand for single shot pistol, brown leather This single shot pistol holster has a neatly stitched edge. The belt loop is stitched in place and wide enough to accept a 2-1/2" wide belt. Right hand side only, when worn on the right, the pistol butt faces to the rear. Made in the U. S. A., these are not cheap imports. Order a matching belt! This brown leather holster has been hand rubbed with n       HOLSTER-PISTOL . . . $36.00

Western Holster, left hand, brown leather, 8" barrel, for percussion Army and Navy revolvers Our Western holster has a cut away top for 'guard. 44 Army and .36 Navy revolvers with up to 8" barrel. Neatly stitched with finished edges, the front strap reinforces the belt loop. Use on any belt up to 4-1/2" width. When worn on the left, the pistol butt faces to the rear. These holsters are a bargain, and they will give good service. Made in th       HOLSTER-WO-L . . . $29.99

Western Holster, right hand, brown leather, 8" barrel, for percussion Army and Navy revolvers Our Western holster has a cut away top for 'guard. 44 Army and .36 Navy revolvers with up to 8" barrel. Neatly stitched with finished edges, the front strap reinforces the belt loop. Use on any belt up to 4-1/2" width. When worn on the right, the pistol butt faces to the rear. These holsters are a bargain, and they will give good service. Made in t       HOLSTER-WO-R . . . $29.99

Thumbpiece , First Model Brown Bess, brass Thumbpiece inlay for the Brown Bess musket. First model muskets used either brass or iron, second model muskets use brass only.       IN-THUMB-46-B . . . $12.99

Top jaw screw for 1746 Willets ~ First Model Brown Bess , 5/16-18 thread Top jaw screw for 1746 Willets ~ First Model Brown Bess , 5/16-18 thread       LOCK-BESS-1-TJX . . . $7.99

Bridle for 1746 Willets ~ First Model Brown Bess , milled steel, with integral pin Bridle for 1746 Willets ~ First Model Brown Bess , milled steel, with integral pin, made in the U.S.A.       LOCK-BESS-46-BR . . . $13.00

Bridle screw for 1746 Willets ~ First Model Brown Bess , .615" long, 8-32 thread Bridle screw for 1746 Willets ~ First Model Brown Bess , .615" long, 8-32 thread       LOCK-BESS-46-BX . . . $3.29

Flint cock for 1746 Willets ~ First Model Brown Bess , wax cast steel, 1.8" throw, undrilled Flint cock for 1746 Willets ~ First Model Brown Bess , wax cast steel, 1.8" throw, undrilled       LOCK-BESS-46-CO . . . $32.00

Frizzen for 1746 Willets ~ First Model Brown Bess , wax cast steel, as cast, temper after fitting Frizzen for 1746 Willets ~ First Model Brown Bess , wax cast steel, as cast, temper after fitting       LOCK-BESS-46-FR . . . $19.00

Frizzen spring for 1746 Willets ~ First Model Brown Bess , wax cast steel, drilled and tempered Frizzen spring for 1746 Willets ~ First Model Brown Bess , wax cast steel, drilled and tempered       LOCK-BESS-46-FS . . . $23.00

Frizzen spring screw for 1746 Willets ~ First Model Brown Bess , .565" long, 8-32 thread Frizzen spring screw for 1746 Willets ~ First Model Brown Bess , .565" long, 8-32 thread       LOCK-BESS-46-FSX . . . $3.29

Frizzen screw for 1746 Willets ~ First Model Brown Bess , 1.025" long, 8-32 thread Frizzen screw for 1746 Willets ~ First Model Brown Bess , 1.025" long, 8-32 thread       LOCK-BESS-46-FX . . . $3.29

Mainspring screw for 1746 Willets ~ First Model Brown Bess , 8-32 thread Mainspring screw for 1746 Willets ~ First Model Brown Bess , 8-32 thread       LOCK-BESS-46-MSX . . . $3.29

Lock Plate and Frizzen for 1746 Willets ~ First Model Brown Bess , machined together, drilled and tapped, with integral pan & pan bridle This 1746 Willits Brown Bess lock plate has frizzen are machined together. The lock plate is drilled and tapped for our internal lock parts. The lock plate is cast with the WILLITS - 1746 date, integral pan & pan bridle. Will require some de-burring and polishing to a bright finish. Overal length 6.68" by 1.18" tall.       LOCK-BESS-46-PL . . . $42.00

has been added to your .

---