Your search for 'gun'
returned
913 results.
|
L&R's RPL-06-F Flint Lock , a fine early Ketland style flat faced lock, to upgrade Ted Hatfield's longrifle, the Davide Pedersoli Frontier longrifle, or Cabela's Blue Ridge longrifle , right hand only, made in the USA, by L&R Lock Company
This right hand flint lock will replace Davide Pedersoli's flint locks, used on his Frontier, Blue Ridge, or Hatfield marked flint locks. The lock plate is drilled for the lock bolt, and the lock mounting bolt is included. Overall length 5-5/8” long x 1” tall, right hand only. Includes instruction booklet. We recommend our 7/8" wide hand knapped
|
|
L&R's RPL-07-F Flint Lock, to upgrade the Traditions Hawken Woodsman, Mountain, Prairie, or Buckskinner Rifle , right hand only, made in the USA, by L&R Lock Company
This flint lock will replace the large flint lock on the Traditions Hawken Woodsman, Mountain, Prairie, or Buckskinner Rifle from Spain. Note the curve on the lower edge of the plate vs. the standard Hawken lock. Overall length 5-1/32” x 1-1/32” width. Right hand only. This lock has thicker stronger internal springs and parts than the Traditions l
|
|
Jacob Dickert , right hand, flint lock by L&R
This fine lock is the correct “Germanic” style for use on classic American longrifles of the 1760 - 1800 era. Made in the style of Jacob Dickert, who worked in Lancaster county, Pennsylvania. More complex than the similar Siler lock, notice that the cock jaws point directly into the octagon pan. The unusual frizzen flange fits and seals the pan, ke
|
|
1780 era small rifle, or pistol flintlock , right hand, by L&R
1780 era rifle or pistol flintlock, right hand, by L&R New competition for the small Siler lock, L&R’s new flat faced lock is for use on American, English, or French longrifles or pistols of the 1760-1800 era. This lock is made to fit the small Siler lock mortise. The lock features L&R's forged mainspring and frizzen with roller. Right hand only
|
|
American Classic longrifle flint lock , right hand, by L&R
American Classic longrifle flint lock, right hand, by L&R New competition for the Siler lock, L&R’s new “Germanic” lock is for use on classic American longrifles of the 1760-1800 era. It is made to fit large Siler lock mortise. The cam action angle of the tumbler engages the mainspring. This really speeds lock time. Turned bearing surfaces on th
|
|
American Early Classic longrifle flint lock, no pan bridle, right hand, by L&R
American Early Classic right longrifle Flint Lock, by L&R New competition for the Siler lock, L&R’s new “Germanic” lock is for use on classic American longrifles of the 1760-1800 era. It is made to fit large Siler lock mortise. The cam action angle of the tumbler engages the mainspring. This really speeds lock time. Turned bearing surfaces on th
|
|
American Classic left longrifle Flint Lock, by L&R
American Classic left longrifle Flint Lock, by L&R New competition for the Siler lock, L&R’s new “Germanic” lock is for use on classic American longrifles of the 1760-1800 era. It is made to fit large Siler lock mortise. The cam action angle of the tumbler engages the mainspring. This really speeds lock time. Turned bearing surfaces on the tumbl
|
|
American Early Classic left longrifle Flint Lock, by L&R
American Early Classic left longrifle Flint Lock, by L&R New competition for the Siler lock, L&R’s new “Germanic” lock is for use on classic American longrifles of the 1760-1800 era. It is made to fit large Siler lock mortise. The cam action angle of the tumbler engages the mainspring. This really speeds lock time. Turned bearing surfaces on the
|
|
cock, left, wax cast steel, 1.4" throw, tapped 1/4-28
cock, left, wax cast steel, 1.4" throw, tapped 1/4-28 A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, which great
|
|
frizzen, left, wax cast steel, as cast, temper after fitting
frizzen, left, wax cast steel, as cast, temper after fitting A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, whic
|
|
Mainspring , left, tempered steel, tempered
mainspring, left, tempered steel, tempered A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, which greatly simplify
|
|
plate, left, wax cast steel, .94" x 5.1", tapped 6-40
plate, left, wax cast steel, .94" x 5.1", tapped 6-40 A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, which great
|
|
English Bar Lock right Percussion Lock, with early flat hammer, by L&R
English Bar right Percussion Lock, with early flat hammer The English “bar" lock is so-called because it uses a “drip bar" soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used
|
|
English Bar Lock right Percussion Lock, with Express hammer, by L&R
English Bar right Percussion Lock, with Express hammer The English “bar" lock is so-called because it uses a “drip bar" soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used “bar
|
|
English Bar Lock left Percussion Lock, with early flat hammer, by L&R
English Bar left Percussion Lock, with early flat hammer The English “bar” lock is so-called because it uses a “drip bar” soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used “b
|
|
English Bar Lock left Percussion Lock, with Express hammer, by L&R
English Bar Lock left Percussion Lock, with Express hammer The English “bar” lock is so-called because it uses a “drip bar” soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used
|
|
Bedford County right hand, percussion lock, by L&R
Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l
|
|
Golden Age Flint Lock , for gunmakers, assembled with oversize plate
Gunmakers flint lock is a Jim Chambers Golden Age flint lock, with an oversize plate. This lock is assembled and tuned. Working parts are fitted as necessary for best action and minimum friction. The oversize plate can be shaped to your custom design. Evidence of the lock maker's skill is obvious in the tight fit of the pan, internal parts, and the
|
|
Siler Flint Lock Kit , for gunmakers
Gunmakers flintlock kit is a Siler flint kit, with an oversize plate.If you are familiar with the internal workings of flintlocks, our Siler kit can be assembled into a fine lock. All holes to be drilled in the plate are spotted. A drill guide is included to aid you in accurately locating holes. Springs are hardened and tempered. Kits come with ins
|
|
Siler Flint Lock , for gunmakers, assembled with oversize plate
Gunmakers flint lock is a Siler flint lock, with an oversize plate. This lock is assembled and tuned. Working parts are fitted as necessary for best action and minimum friction. The oversize plate can be shaped to to your custom design. Evidence of the lock maker’s skill is obvious in the tight fit of the pan, internal parts, and the smooth action.
|
|
Siler large left Percussion Conversion Lock, by Jim Chambers
Siler large left Percussion Conversion Lock Ideal for a left hand percussion longrifle, this Germanic style lock has the long pointed tail, raised lock plate with chamfered edges, and filed moulding across the tail, styles used during the 1750 - 1780 flint lock era. Originally designed as a flint lock, many longrifles were converted to percussio
|
|
Siler large right Percussion Conversion Lock, by Jim Chambers
Siler large right Percussion Conversion Lock Ideal for a percussion longrifle, this Germanic style lock has the long pointed tail, raised lock plate with chamfered edges, and filed moulding across the tail, styles used during the 1750 - 1780 flint lock era. Originally designed as a flint lock, many longrifles were converted to percussion during
|