Your search for 'gun'
returned
913 results.
|
Ramrod forward pipe, English fowling gun , for 3/8" diameter ramrod, lug for pin, wax cast brass, made in the USA
Forward Ramrod pipe for a 1750 era English fowling gun, as cast for a 3/8" diameter ramrod, lug for pin, wax cast brass. Made in the USA. Our forward pipe, is 1-1/2" overall length. Made for a fullstock rifle (with wood extending to muzzle), most rifles use two forward pipes. A few extra long rifles use three forward pipes. Use one, or sometimes tw
|
|
Ramrod forward pipe, English fowling gun , for 3/8" diameter ramrod, lug for pin, wax cast steel, made in the USA
Forward Ramrod pipe for a 1750 era English fowling gun, as cast for a 3/8" diameter ramrod, lug for pin, wax cast steel. Made in the USA. Our forward pipe, is 1-1/2" overall length. Made for a fullstock rifle (with wood extending to muzzle), most rifles use two forward pipes. A few extra long rifles use three forward pipes. Use one, or sometimes tw
|
|
Screws & pins , complete set for North West Trade Gun , unplated steel
Our complete set of screws & pins for the North West Trade Gun are made of unplated or black oxide finished steel, with slotted heads. These are becoming scarce. Our set includes: 2 #BOLT-L-10-D domed lock bolt, 10-32, for mounting the lock, plus 1 #BOLT-L-10-USL domed lock bolt, 10-32, for use as an inverted tang screw, plus 1 #SCREW-10-D domed
|
|
Triggerguard, French Fusil Fin Trade Gun , brass
Copied from an original French fusil fin trade gun. These beautiful weapons were widely traded in the 1730 - 1760 era throughout America. Wax cast brass, with decorative engraving. Overall length is 12", inside trigger bow is 2-1/16" long, and 1-3/16" deep.
|
|
Triggerguard, French Fusil Fin Trade Gun , steel
Copied from an original French fusil fin trade gun. These beautiful weapons were widely traded in the 1730 - 1760 era throughout America. Wax cast steel, with decorative engraving. Overall length is 12", inside trigger bow is 2-1/16" long, and 1-3/16" deep.
|
|
Thomas Pickering's Tool , for flint rifles & pistols, the first U. S. issue gun tool, designed by our first U. S. Quartermaster
Small size, this tool is made to fit your Jim Chamber's small Queen Anne pistol lock, small Siler flint lock, smaller L&R Bailes locks, and pistol size flint locks. Hand forged, ground to fit the lock screws correctly, and tempered, this tool will give a lifetime of service, exactly like the original. This is a replica of the first U. S. issued gun
|
|
Chisels for Inletting, forged in the U.S.A.
American made Gun Stock Maker's Chisels . Forged in the U. S. A. for gunmakers, these chisels are made of tempered 1095 high carbon spring steel. Hardened to produce a fine grain structure, 1095 steel has finer grain, greater hardness, and can be whetted to a sharper edge than steels which contain nickel or chrome. Each tool is individually hand g
|
|
Nipples
Track's new nipples - for the traditional purist hardened and tempered carbon steel, as original: Purists will appreciate our temper blued steel nipples, made from traditional carbon steel, as were the original nipples. Hardened and tempered to Rc 38 - 44, these long lasting nipples require hot water cleaning after eac
|
|
|
Chisels for inletting, forged in the U.S.A.
American made Gun Stock Maker's Chisels . Forged in the U. S. A. for gunmakers, these chisels are made of tempered 1095 high carbon spring steel. Hardened to produce a fine grain structure, 1095 steel has finer grain, greater hardness, and can be whetted to a sharper edge than steels which contain nickel or chrome. Each tool is individually hand g
|
|
Ball Pullers, steel screws with brass collars
Ball pullers with or without brass collar, representative image shown. Brass collar size will vary by caliber. Use 8-32 to fit standard rods, and 10-32 to fit Thompson Center, CVA, Lyman, Traditions, and most Italian or Spanish guns.
|
|
Bore Brushes & Bore Mops
100% Cotton Bore Mops These cotton bore mops are excellent for quick cleaning and bore lubricating. Wash, rinse and air dry after use. They will last a long time. Available with 10-32 threads, and select sizes in 5/16-27 thread to fit your shotgun rod, or our #SA-8 or #SA-10 adapter. Phosphor Bronze Bore Brushes Bronze bore brushes designed for
|
|
Fouling Scrapers for breech cleaning
Fouling Scrapers with 8-32 threads for standard rods and 10-32 threads for Thompson Center, CVA, Traditions, and most Italian guns. Brass with flat face to scrape plug. Or cut to fit breech cavity.
|
|
|
Nipples
Track's new nipples - for the traditional purist hardened and tempered carbon steel, as original: Purists will appreciate our temper blued steel nipples, made from traditional carbon steel, as were the original nipples. Hardened and tempered to Rc 38 - 44, these long lasting nipples require hot water cleaning after eac
|
|
|
Chisels for inletting, forged in the U.S.A.
American made Gun Stock Maker's Chisels. Forged in the U. S. A. for gunmakers, these chisels are made of tempered 1095 high carbon spring steel. Hardened to produce a fine grain structure, 1095 steel has finer grain, greater hardness, and can be whetted to a sharper edge than steels which contain nickel or chrome. Each tool is individually hand gr
|
|
Deluxe Siler, flint, right hand lock, by Jim Chambers
Chambers' deluxe Siler Flint Lock Said to be the fastest and most reliable "Siler" flint lock ever made, this right hand flint lock is the latest offering from that ingenious lock maker, Mr. Jim Chambers. He has included every trick in this lock. Built on a true Siler lock plate, pan and frizzen, it will fit any mortise pre-inlet for the large
|
|
|
Nipples
Track's new nipples - for the traditional purist hardened and tempered carbon steel, as original: Purists will appreciate our temper blued steel nipples, made from traditional carbon steel, as were the original nipples. Hardened and tempered to Rc 38 - 44, these long lasting nipples require hot water cleaning after eac
|
|
Cleaning Rods, finished, with handles
Creedmore Gun Rods, of stainless steel: Muzzleloading Creedmore rods have the same comfortable handle on a one piece stainless rod, but do not rotate. The rigid handle allows this rod to be used with a bullet puller. Each rod includes a rod guide to center the rod in the bore for cleaning from the muzzle to the breech. Stainless steel 5/16" rod h
|
|
|
Ball Pullers, steel screws with brass collars
Ball pullers with or without brass collar. Representive ball puller shown, collar diameter will vary by caliber. Use for 8-32 threads to fit standard rods, and 10-32 threads to fit Thompson Center, CVA, Lyman, Traditions, and most Italian or Spanish guns.
|
|
|
Bore Brushes & bore mops
100% Cotton Bore Mops These cotton bore mops are excellent for quick cleaning and bore lubricating. Wash, rinse and air dry after use. They will last a long time. Available with 10-32, and select sizes in 5/16-27 thread to fit your shotgun rod, or our #SA-8 or #SA-10 adaptor. Phosphor Bronze Bore Brushes Bronze bore brushes designed for black p
|
|
|
Fouling Scrapers
Fouling Scrapers with 8-32 threads for standard rods and 10-32 threads for Thompson Center, CVA, Traditions, and most Italian guns. Brass with flat face to scrape plug. Or cut to fit breech cavity.
|
|
Dixie Tennessee Mountain Rifle discontinued, no factory parts or support
Dixie Tennessee Mountain Rifle by Miroku, Japan, is discontinued. No spare parts are available from Dixie Gun Works.Made in flint or percussion, in a variety of calibers, this Southern style longrifle is stocked in cherry, with iron furniture, and a hole for patch grease is drilled in the side of the buttstock.L&R Lock Company offers an upgrade, a
|
|
Synthetic Gun Oil, with PTFE lubricant, 4-1/2 oz. spout can liquid by Birchwood Casey
A superior lubricant for all climates. Contains PTFE lubricant to greatly reduce the friction between mating surfaces. Will not gum-up or lose its viscosity under extreme temperature variations -55 to 300 degrees Fahrenheit. Low evaporation rate assures protection against rust. By Birchwood Casey. This item cannot be shipped to the state of Califor
|