Trigger Plate Only , John Bivins, wax cast steel The patterns for this fancy trigger were made by John Bivins. Originally this trigger was designed to be pinned to the wood. The trigger plate served only as a "wear plate". We have added ears to serve as an integral pivot point. However, it is possible to drill the pivot hole high in the corner, and pin the trigger to the plate. The as cast plate       TR-BIVINS-P . . . $15.00

Double set trigger , single lever style The target style front trigger has no lever to engage the sear. The trigger must be set to fire the lock. Wax cast steel parts are tempered. We stock spare parts, rarely needed unless you bend a part. We can supply annealed triggers on request. This trigger is a precision assembly made with heat treated tool steel. If either trigger must be bent to       TR-DST-1 . . . $69.00

Double set trigger kit , single lever type, not assembled Our trigger kit includes simple clear illustrated instructions. This trigger kit can be assembled and finished in 10 easy steps, during a long evening. This single lever "target style" double set trigger can only be fired from the set position. If the new gun you are building requires bending the triggers or plate, we recommend this kit. Bend the p       TR-DST-1K . . . $42.50

Double Set Trigger early style curled long bar rear trigger The photograph shows this trigger in the "set" position. This "double lever" set trigger has a front trigger lever to engage the sear, so the lock can be fired with the trigger unset. The trigger bar is about .400" wide and 5-1/4" long. Wax cast steel parts are finished, tempered and assembled. We stock spare parts, in the unlikely event that any p       TR-DST-EA . . . $69.00

Double Set Trigger curled long bar rear trigger This "double lever" set trigger has a front trigger lever to engage the sear, so the lock can be fired with the trigger unset when properly tuned. The photo shows this trigger in the "set" position. The photo shows the maximum spacing of the two triggers. Although the rear trigger is gently curled, this trigger can be used with a medium size trigge       TR-DST-GA . . . $69.00

Trigger Plate, Early Longrifle or Fowler , wax cast steel Trigger plate for an early longrifle or fowler. Patterned in the style of Herman Rupp. Overall length 3-1/32", width 0.4", 1/16" thick with 5/32" thick boss at the front for a lock bolt. Trigger slot is 0.09" wide by 0.89" long. Wax cast steel. Made in the U.S.A.       TR-FG-1-P . . . $12.99

Trigger Plate, Early Longrifle or Fowler , integral pivot arms, wax cast steel Trigger plate for an early longrifle or fowler with integral pivot arms for the trigger pin. Overall length 3-1/32", width 0.4", 0.07" thick with 0.16" thick boss at the front for a lock bolt. Trigger slot is 0.09" wide by 1.07" long. Wax cast steel. Made in the U.S.A.       TR-FG-2-P . . . $12.99

Trigger Plate, English Fowler , wax cast steel The English fowler trigger plate is .508" wide, tapering to .325". Patterned after an original with an off-set slot, thick front boss for the tang screw and thinned at the rear. Wax cast steel       TR-FOWL-MH-P . . . $12.99

Double Set Trigger , for Jaeger style rifle This double lever set trigger, has a curled front trigger, and a straight rear trigger which sets flat to the wrist. It requires an open bow triggerguard. The rear trigger has octagon flats which echo the theme of the octagon barrel. The trigger plate is about .400" wide. Wax cast steel parts are finished, tempered. We stock all spare parts. Spare       TR-JAEG . . . $69.00

Double Set Trigger Kit , for Jaeger style rifle This double lever set trigger, has a curled front trigger, and a straight rear trigger which sets flat to the wrist. It requires an open bow triggerguard. The rear trigger has octagon flats which echo the theme of the octagon barrel. The trigger plate is about .400" wide. Wax cast steel parts are finished, tempered. We stock all spare parts. Spare       TR-JAEG-K . . . $39.99

trigger, rear, tempered steel, for #TR-Jaeg double set triggers This double lever set trigger, has a curled front trigger, and a straight rear trigger which sets flat to the wrist. It requires an open bow triggerguard. The rear trigger has octagon flats which echo the theme of the octagon barrel. The trigger plate is about .400" wide. Wax cast steel parts are finished, tempered. We stock all spare parts. Spare       TR-JAEG-RT . . . $15.99

Trigger plate , wax cast steel, copied from antique H.E. Leman trade rifle in Track's collection This trigger plate was copied from an original H.E. Leman trade rifle. 2-11/16" long, 1/16" thick with a 1/8" thick lug at the front to engage the tang bolt. The slot is 1-1/16" long by .100" wide. This plate will accept our #TR-LEMAN-1-T perfectly. Made in the U.S.A.       TR-LEMAN-1-P . . . $12.99

Trigger and Trigger Plate Assembly A nice curled flint style trigger for your fine early longrifle. Fits well in most triggerguards. The pivot pin is high, for maximum leverage and minimum trigger pull. The plate is about .429" wide, with rounded ends. Notice the taper or "draft" along the trigger plate's edge, said to simplify inletting. The thick plate can be drilled at front to a       TR-LR-1500-C . . . $37.50

Shotgun Trigger with long trigger plate This trigger and plate was first used on the Sharon 10 gauge single barrel fowling gun kit. It works well with our #TG-Eng-3 triggerguard, using a mounting screw from above. We recommend using our #Bolt-T-10-F tang bolt. This trigger plate is about .485" at the widest point, tapering to .385" at the rear. Rounded at the rear, it has a tapered "beav       TR-LR-1600 . . . $37.50

Trigger plate , for TR-LR-BEDFORD double set triggers, as cast, plate only, .400" wide Trigger plate, for #TR-LR-BEDFORD double set triggers, as cast, plate only, .400" wide. Designed for use with flat front trigger spring.       TR-LR-BEDFORD-PL . . . $52.50

Trigger , rear in the style of John Amos, tempered steel, for #TR-LR-BEDFORD double set triggers Rear trigger in the style of John Amos, Bedford County Pennsylvainia. Tempered steel, for #TR-LR-BEDFORD double set triggers. Uses flat front trigger spring.       TR-LR-BEDFORD-RT . . . $15.50

Double Shotgun Trigger and Entry Pipe Modeled after a fine original English double by Moore & Harris. Trigger springs are silent, with return springs. Front trigger fires the right barrel. Includes double shotgun entry pipe with matching finial. Overall length 5-7/8". Wax cast steel. Made in the U.S.A. by L & R.       TR-LR-DBL . . . $115.00

Traditional Pistol Trigger and Plate Assembly This attractive trigger has a wide face and curled tip for use on early flint pistols or small rifles. The trigger plate is.470 at the widest point. The front end of the trigger tapers to .330 and the rear of the trigger tapers to .360. Plate length is 2.750 inches long. Wax cast steel. Made in the U.S.A. The trigger plate is .429" wide, with round       TR-PIST-T-TP . . . $30.99

Trigger Plate, Tulle fusil-de-chasse , wax cast steel, a copy of our original, by Track of the Wolf, Inc. This is a French style trigger plate, a correct copy of the original in our Tulle fusil-de-chasse . It is an attractive design, suitable for use on pistols, longrifles, and fowling guns that are fitted with a single trigger. The slot is .095" wide, and is ideal for use with our #TR-TULLE-2-T correct replica Tulle fusil trigger.br> Made in the USA,       TR-TULLE-2-P . . . $12.99

Trigger, Tulle fusil-de-chasse , wax cast steel, a copy of our original, by Track of the Wolf, Inc. This is a French style trigger plate, a correct copy of the original in our Tulle fusil-de-chasse . It is a very simple attractive design, suitable for use on pistols, longrifles, and fowling guns that require a single trigger. The trigger is about .095" wide, and must be lightly polished before installation. This trigger is designed to be mounte       TR-TULLE-2-T . . . $8.59

Trigger Plate only , for our Isaac Haines, Lancaster County stock, wax cast steel Trigger plate only, as cast. Plate tapers from .475" at widest point to .300" at rear, narrowing at front. This trigger plate is pre-inlet into our special fancy fully pre-shaped Isaac Haines style Lancaster County stock. Made in the USA.       TR-YORK-P . . . $12.99

Trigger & Trigger Plate , for our Isaac Haines, Lancaster County stock, wax cast steel Trigger and plate, assembled from steel wax castings. Plate tapers from .475" at widest point to .300" at rear, narrowing at front. Curled trigger is about .330" wide, with scroll back. Not very high, this trigger allows for a very thin wrist, and is pre-inlet into our special fancy fully pre-shaped Isaac Haines style Lancaster County stock. Made i       TR-YORK-TP . . . $30.50

has been added to your .

---