trigger only, front, tempered steel, for #TR-JDV-34 double set triggers       TR-JDV-39-FT . . . $7.50 Closeout

front trigger spring, tempered steel, fits TR-JDV-39 double set triggers       TR-JDV-39-FTS . . . $3.50 Closeout

trigger mainspring, tempered steel, fits #TR-JDV-39 double set triggers       TR-JDV-39-MS . . . $6.00 Closeout

trigger only, rear, tempered steel, for #TR-JDV-39 double set triggers       TR-JDV-39-RT . . . $7.50 Closeout

Trigger plate , wax cast steel, copied from antique H.E. Leman trade rifle in Track's collection This trigger plate was copied from an original H.E. Leman trade rifle. 2-11/16" long, 1/16" thick with a 1/8" thick lug at the front to engage the tang bolt. The slot is 1-1/16" long by .100" wide. This plate will accept our #TR-LEMAN-1-T perfectly. Made in the U.S.A.       TR-LEMAN-1-P . . . $12.99

Trigger , wax cast steel, copied from antique H. E. Leman trade rifle in Track's collection This wax cast steel trigger was copied from an original H.E. Leman trade rifle. The trigger is designed to be pinned through the wood with a high pivot point to provide good leverage against the sear. Use a 3/32" diameter pin. The .085" thick trigger is designed to fit our #TR-LEMAN-1-P . Made in the U.S.A.       TR-LEMAN-1-T . . . $8.59

Hawken Double Set Trigger , with straight front trigger, by L & R Made with an early straight front trigger, otherwise identical to the curved front trigger. Use our early Hawken "flat grip rail" triggerguard. Use on fullstocks or early halfstock Hawken rifles. Double lever, it has free-play backlash to allow the lock to be cocked with trigger set or unset. Spare parts may be used in identical triggers from the o       TR-LR-1300 . . . $100.00

Trigger, straight front , tempered steel, for #TR-LR-1300 double set triggers       TR-LR-13-FT . . . $15.50

Front trigger spring , tempered steel, fits #TR-LR-1300 and 1400 double set triggers       TR-LR-13-FTS . . . $7.95

Trigger mainspring , tempered steel, fits #TR-1300 and 1400 double set triggers       TR-LR-13-MS . . . $12.00

Trigger mainspring screw , for #TR-LR-1300 and 1400, Hawken double set triggers       TR-LR-13-MSX . . . $1.95

Trigger pivot pin , 3/32" diameter, 1/2" width, fits several triggers       TR-LR-13-PI . . . $1.00

Trigger plate , for #TR-LR-1300 or 1400 trigger, as cast, plate only, .470"wide       TR-LR-13-PL . . . $56.50

Trigger, rear , tempered steel, for #TR-LR-1300 double set triggers       TR-LR-13-RT . . . $15.50

Trigger adjustment screw , 2-56 thread, .42" shank, fits several double set triggers       TR-LR-13-TAX . . . $1.99

Hawken Double Set Trigger , with curved front trigger, by L & R The late style curved front trigger distinguishes this trigger from the nearly identical early straight front trigger. Made by L&R Lock Co., each trigger bears their touchmark. Double lever style, it has enough backlash to allow the lock to be cocked and fired, with the trigger set or unset. Spare parts may be used in identical triggers from the ol       TR-LR-1400 . . . $100.00

Trigger, curled front , tempered steel, for #TR-LR-1400 double set triggers       TR-LR-14-FT . . . $15.50

Shotgun Style Trigger with Short Plate A good choice for hunting rifles, the curved trigger fits well in most triggerguards. The pivot pin is high, for maximum leverage and minimum trigger pull. Nice steel wax castings. The trigger plate is .429" wide, with rounded ends. The tapered sides, called "draft", help simplify inletting. The thick plate can be drilled to accept a tang screw, a       TR-LR-1500 . . . $37.50

Trigger and Trigger Plate Assembly A nice curled flint style trigger for your fine early longrifle. Fits well in most triggerguards. The pivot pin is high, for maximum leverage and minimum trigger pull. The plate is about .429" wide, with rounded ends. Notice the taper or "draft" along the trigger plate's edge, said to simplify inletting. The thick plate can be drilled at front to a       TR-LR-1500-C . . . $37.50

Shotgun Style Trigger only fits TR-LR-1500 or 1600 Sold as cast, this trigger has the pivot pin hole pre-drilled for use in the TR-LR-1500 or TR-LR-1600 triggers. The pivot pin is high, for maximum leverage and minimum trigger pull. Nice steel wax castings.       TR-LR-15-T . . . $13.50

Shotgun Trigger with long trigger plate This trigger and plate was first used on the Sharon 10 gauge single barrel fowling gun kit. It works well with our #TG-Eng-3 triggerguard, using a mounting screw from above. We recommend using our #Bolt-T-10-F tang bolt. This trigger plate is about .485" at the widest point, tapering to .385" at the rear. Rounded at the rear, it has a tapered "beav       TR-LR-1600 . . . $37.50

Double Set Double Lever Triggers , curled front trigger, back lash adjustment screw, by L&R This new double set trigger by L&R has a higher front trigger blade, a longer travel ramp to accommodate a wider range of adjustment, back lash adjustment screw. The front trigger has a decorative front curl. The maximum spacing of the front and rear triggers is 1-1/4". Compare this distance to your choice of triggerguards. The trigger plate is abo       TR-LR-1710 . . . $75.00

Back lash adjustment screw , 6-40 hex wrench installed, several double set triggers       TR-LR-1710-BLAX . . . $1.00

Trigger, front , tempered steel, for #TR-LR-1710 double set triggers, uses flat front trigger spring Trigger, front , tempered steel, for #TR-LR-1710 double set triggers, uses flat front trigger spring       TR-LR-1710-FT . . . $15.50

Front trigger spring , wire spring tempered steel, fits several double set triggers, replaces flat spring version Front trigger spring , wire spring tempered steel, fits several double set triggers, replaces flat spring version       TR-LR-1710-FTS . . . $8.95

has been added to your .

---