Carlos Gove pattern pipe tomahawk , brass head, 22" tapered hickory handle, made in the U.S.A. A replica of a Carlos Gove pipe tomahawk, from his early days in Council Bluffs, he later became a famous gun maker in Denver. Similar designs were also commonly imported in the 18th and early 19th centuries from Europe, and widely imitated by American blacksmiths. This investment cast head is real yellow brass, not bronze. The pipe bowl is holl       TOMAHAWK-GOVE-B . . . $59.99

Carlos Gove pattern pipe tomahawk , brass head, 22" tapered and drilled curly maple handle, made in the U.S.A. A replica of a Carlos Gove pipe tomahawk, from his early days in Council Bluffs, he later became a famous gun maker in Denver. Similar designs were also commonly imported in the 18th and early 19th centuries from Europe, and widely imitated by American blacksmiths. The investment cast head is real yellow brass, not cheap aluminum bronze. The pipe       TOMAHAWK-GOVE-B-M-D . . . $88.00

Carlos Gove pattern pipe tomahawk , 4140 alloy steel head, 22" tapered and drilled curly maple handle, made in the U.S.A. A replica of a Carlos Gove pipe tomahawk, from his early days in Council Bluffs. He later became a famous gun maker in Denver. Similar designs were also commonly imported in the 18th and early 19th centuries from Europe, and widely imitated by American blacksmiths. The investment cast head is 4140 steel. The pipe bowl is hollow with a cast hole       TOMAHAWK-GOVE-M-D . . . $81.99

Iroquois Tomahawk , 2-7/8" edge, wax cast 4140 steel, cast-in correct period floral engraving, tapered hickory handle, made in the U.S.A. Our Iroquois tomahawk head is wax cast of 4140 alloy steel. The 6-1/4" head has a 2-7/8" edge. This head design will accept our standard 18" hickory handle, with little or no fitting. The head is a precise wax casting, and will require deburring and polishing. Deburr the front of the "poll" (hammer face), to remove the casting gage, using a few lon       TOMAHAWK-IR . . . $39.99

Iroquois Tomahawk , 2-7/8" edge, wax cast of real brass, cast-in correct period floral engraving, tapered 18" hickory handle, made in the U.S.A. Our Iroquois tomahawk head is wax cast real yellow brass. The 6-1/4" head has a 2-7/8" edge. This head will accept our standard 18" hickory handle. One handle is included. To order spare handles, specify #HANDLE-STD. The head is a precise wax casting, and will require deburring and polishing. Deburr the front of the "poll" (hammer face), to remove       TOMAHAWK-IRB . . . $48.99

Iroquois Tomahawk , 2-7/8" edge, wax cast of real brass, cast-in correct period floral engraving, tapered 22" hickory handle, made in the U.S.A. Our Iroquois tomahawk head is wax cast real yellow brass. The 6-1/4" head has a 2-7/8" edge. The head is a precise wax casting, and will require deburring and polishing. Deburr the front of the "poll" (hammer face), to remove the casting gage, using a few long strokes of a fine file. Polish the blade surfaces by hand, using fine emery paper or fin       TOMAHAWK-IRB-GH . . . $55.49

Iroquois Tomahawk , 2-7/8" edge, wax cast 4140 steel, cast-in correct period floral engraving, 22" tapered hickory handle, made in the U.S.A. Our Iroquois tomahawk head is wax cast of 4140 alloy steel. The 6-1/4" head has a 2-7/8" edge. The head is a precise wax casting, and will require deburring and polishing. Deburr the front of the "poll" (hammer face), to remove the casting gage, using a few long strokes of a fine file. Polish the blade surfaces by hand, using fine emery paper or f       TOMAHAWK-IR-GH . . . $51.98

Large Heart Tomahawk , 4" cutting edge, 4140 alloy steel, 18" tapered hickory handle, made in the U.S.A. In response to the demand for a "prettier" primitive tomahawk, we have added this pierced heart design. The weeping heart is a Pennsylvania Deutsch hex design, found on painted chests and longrifles. The blade edge is just over 4" in arc length, the NMLRA legal limit. It requires quick sharpening before use, to qualify for NMLRA match rules. Made i       TOMAHAWK-LH . . . $50.29

Large Heart Tomahawk , 4" cutting edge, 4140 alloy steel, 22" tapered hickory handle, made in the U.S.A. In response to the demand for a "prettier" primitive tomahawk, we have added this pierced heart design. The weeping heart is a Pennsylvania Deutsch hex design, found on painted chests and longrifles. The blade edge is just over 4" in arc length, the NMLRA legal limit. It requires quick sharpening before use, to qualify for NMLRA match rules. Made i       TOMAHAWK-LH-GH . . . $54.79

Medieval Tomahawk , 5-3/8" blade, 4140 alloy steel, 18" tapered hickory handle. made in the U.S.A. Our largest! This big tomahawk is inspired by the bearded axe used in Medieval Europe. It will be a winner in strong hands. The massive 1.8 pound head will cause the tomahawk to spin slowly when thrown hard. The tomahawk head has a long reinforced eye design. The blade edge is over the 4" in arc length for NMLRA tomahawk throwing events. It require       TOMAHAWK-ME . . . $50.29

New Reliable Tomahawk , 4" cutting edge, 4140 alloy steel, 18" tapered hickory handle. made in the U.S.A. Our most popular throwing 'hawk, sometimes called the "octagon tomahawk" because of the decorative flats on it's carbon cutlery steel blade. The blade edge is just over 4" in arc length, the NMLRA legal limit. It requires quick sharpening before use, to qualify for NMLRA match rules. Made in the U.S.A. wax cast of tempered 4140 alloy steel, a few l       TOMAHAWK-NR . . . $50.29

New Reliable Tomahawk , 4" cutting edge, 4140 alloy steel, 22" tapered hickory handle. made in the U.S.A. Our most popular throwing 'hawk, sometimes called the "octagon tomahawk" because of the decorative flats on it's carbon cutlery steel blade. The blade edge is just over 4" in arc length, the NMLRA legal limit. It requires quick sharpening before use, to qualify for NMLRA match rules. Made in the U.S.A. wax cast of tempered 4140 alloy steel, a few l       TOMAHAWK-NR-GH . . . $54.79

Our "New Reliable" Wax Cast Steel Tomahawk, two tapered hickory handles and Knife & Tomahawk Throwing Book This set includes our most popular throwing 'hawk, sometimes called the "octagon tomahawk" because of the decorative flats on the carbon cutlery steel blade, the book Knife & Tomahawk Throwing by Barry Hardin and two 18" tapered hickory handles. The blade edge of this tomahawk is just over 4" in arc length, the NMLRA legal limit. It requires quic       TOMAHAWK-NR-KTT . . . $62.77

Old Reliable Tomahawk , 3-1/2" cutting edge, 4140 alloy steel, 18" tapered hickory handle. made in the U.S.A. A very popular throwing tomahawk. The cast alloy steel blade is hard enough to endure competition. Oval teardrop eye is fitted to our best tapered straight grain hickory handle. The head weighs just under 1 pound. The blade edge is just over 3-1/2" in arc length, below the NMLRA legal limit. It requires quick sharpening before use, to qualify for N       TOMAHAWK-OR . . . $50.29

Old Reliable Tomahawk , 3-1/2" cutting edge, 4140 alloy steel, 22" tapered hickory handle. made in the U.S.A. A very popular throwing tomahawk. The cast 4140 alloy steel blade is hard enough to endure competition and the head weighs just under 1 pound. Includes our 22" hickory Carlos Gove pattern tomahawk handle with a swell along the bottom. Sanded smooth, this handle is ready for stain or oil finishing, if desired. For competion throwing we would recomm       TOMAHAWK-OR-GH . . . $54.79

Tiny Tomahawk, 3-1/4" cutting edge, 4140 alloy steel, with 16" tapered hickory handle, made in the USA A miniature tomahawk similar to our popular full size "New Reliable" tomahawk, but much smaller. It accepts our "tiny" hickory handle. Sturdy 4140 wax cast alloy steel blade, it will endure all the abuse small hands can muster. This head weighs 6/10's of a pound. The blade is 3-1/4", measured along the arc. Comes with a unfinished hickory handle. M       TOMAHAWK-TH . . . $50.29

Viking Tomahawk , 4-5/8" cutting edge, 4140 alloy steel, 18" tapered hickory handle, made in the U.S.A. Made with a reinforced eye, after an early original design, this 15-1/2 ounce head has an oversize cutting edge which is tipped upward for maximum advantage. This "cheater" won't pass formal NMLRA match inspection, but is tough to beat in local club "free-for-all" competition. The blade is 4-5/8", measured along the arc. Made in the U.S.A. wax cast       TOMAHAWK-VA . . . $50.29

Double Punch for locating Track's underlug staples Underlug staples are authentic, stronger, easier to install, and they remove less metal than dovetail lugs. Not suitable for thin wall barrels. Staples work well for keys, pins, or supporting a sling swivel. Align our double punch with a center-line drawn on the bottom flat of your octagon barrel. Strike it to prick punch the exact spacing for our       TOOL-105-P . . . $9.99

Staking Tool, for securely staking staples, permanently Underlug staples are authentic,stronger, easier to install, and they remove less metal than dovetail lugs. Not suitable for thin walled barrels. Staples work well for keys, pins, or supporting a sling swivel. Insert one end of our staple into your hole, and seat it with a light hammer blow. Place the semicircular slotted end of this tool around the       TOOL-105-S . . . $9.99

British Issue Musket Tool , forged & tempered imported carbon cutlery steel, pin punch & turnscrews, for your Brown Bess Musket A very useful tool for managing the Brown Bess and similar military muskets. Carry this correct replica tool in your cartridge box our pouch. The British musket tool has a large screwdriver head, for tightening the top-jaw screw on your musket, and a smaller screwdriver head for the lock bolts or any other screws. It also has a pin punch, for dismo       TOOL-BESS . . . $24.59

Gunsmith's Brass Hammer , 4 ounce head, 12" hickory handle made in the USA Our Gunsmith's brass hammer has a 4 ounce brass head, about 3/4" diameter, 2-3/16" long, fitted with a 12" hickory handle. Useful for drifting wedge keys and barrel pins, ideal for fitting dovetail sights and lugs..       TOOL-BH-4 . . . $19.99

Brass Hammer , 8 ounce, 9-1/2" hickory handle, made in the USA Our hammer has an 8 ounce brass head measuirng 1" in diameter and 2-1/8" long. Includes a 9-1/2" long hickory handle. Useful for drifting wedge keys and barrel pins, ideal for installing dovetail sights and lugs..       TOOL-BH-8 . . . $23.99

Flint Rifle & Musket Tool , hand forged knapping hammer, vent pick, turnscrew, patch worm, and rod extension Copied from an original, this hand-forged flint rifleman's combination tool is hardened and tempered, ideal for the French & Indian War or Revolutionary War re-enactor. Made to serve the Davide Pedersoli Brown Bess or Springfield or Charleville Musket, the forged blade tightens the top jaw screw. You can easily change flints on your Brown Bess flin       TOOL-COMBO . . . $42.59

Dovetail Forming Chisel wax cast steel, made in the USA Use our dovetail forming chisel to “persuade" the slot to accept your lug or sight. It raises the metal, rather than removing it. Underlug slots may be half deep, half raised. Or use it to form a raised moulding for your rear sight. Very shallow dovetails in round barrels may be stronger than solder for underlugs. Instruction sheet included. A exam       TOOL-DOVETAIL . . . $15.99

Drum drilling tool , alignment jig, for drilling nipple threads Install a percussion powder drum on your new rifle barrel, and be assured of perfect alignment. Using this drilling jig is very quick and easy. No file fitting is required to index the nipple to correctly engage the hammer. Never use a washer or shim under your powder drum. Install one of our drums and use this tool to locate and install the nipple       TOOL-DRUM . . . $15.99

has been added to your .

---