Swivel Post Stud, 7/16" ball head drilled for narrow swivel The 7/16" diameter head of the post sling stud has been thinned to 5/16" width and cross drilled to mount our narrow swivel, #SWIVEL-4-N. Tapered screw thread as found on many antiques. We recommend drilling a pilot hole with a #DRILL-14 (.182") drill bit when installing this in the stock.       SWIVEL-POST . . . $7.50

Swivel , early U shaped for forend, includes 6-40 mounting screw, wax cast steel The "U" shaped swivel mounts on the forend of the fullstock and should ideally rest against a ramrod pipe to prevent blocking the ramrod channel. The screw should be installed through a underlug dovetailed into the bottom flat of the barrel such as a #UL-DH-1, sold separately. Uses a 6-40 screw, included with the swivel. Swivel is over 15/16" wide       SWIVEL-UL . . . $12.99

Tacks, antiqued plated brass, 1/4" diameter cone shaped, per 100 Tacks, antiqued plated brass, 1/4" diameter cone shaped, per 100. The shank is approximately 7/16" long.       TACK-CS-4-A . . . $6.99

Tacks, polished plated brass, 1/4" diameter cone shaped, per 100 Tacks, polished plated brass, 1/4" diameter high domed, per 100. The shank is approximately 7/16" long.       TACK-CS-4-B . . . $6.99

Tacks, antiqued plated brass, 1/4" diameter high domed, per 100 Tacks, antiqued plated brass, 1/4" diameter high domed, per 100. The steel shank is approximately 1/2" long.       TACK-HD-4-A . . . $6.99

Tacks, polished plated brass, 1/4" diameter high domed, per 100 Tacks, polished plated brass, 1/4" diameter high domed, per 100. The steel shank is approximately 1/2" long.       TACK-HD-4-B . . . $6.99

Tacks, antiqued plated brass, 3/8" diameter high domed, per 100 Tacks, antiqued plated brass, 3/8" diameter high domed, per 100. The steel shank is approximately 3/8" long.       TACK-HD-6-A . . . $8.59

Tacks, polished plated brass, 3/8" diameter high domed, per 100 Tacks, polished plated brass, 3/8" diameter high domed, per 100. The steel shank is approximately 3/8" long.       TACK-HD-6-B . . . $8.59

Tacks, antiqued plated brass, 1/2" diameter high domed, per 100 Tacks, antiqued plated brass, 1/2" diameter high domed, per 100. The steel shank is approximately 7/16" long.       TACK-HD-8-A . . . $8.99

Tacks, polished plated brass, 1/2" diameter high domed, per 100 Tacks, polished plated brass, 1/2" diameter high domed, per 100. The steel shank is approximately 7/16" long.       TACK-HD-8-B . . . $8.99

Tacks, antiqued plated brass, 5/16" diameter low domed, per 100 Tacks, antiqued plated brass, 5/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-5-A . . . $6.99

Tacks, polished plated brass, 5/16" diameter low domed, per 100 Tacks, polished plated brass, 5/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-5-B . . . $6.99

Tacks, antiqued plated brass, 7/16" diameter low domed, per 100 Tacks, antiqued plated brass, 7/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-7-A . . . $8.99

Tacks, polished plated brass, 7/16" diameter low domed, per 100 Tacks, polished plated brass, 7/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-7-B . . . $8.99

Taps , high carbon steel, 3-48 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 4-40 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 5-40 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 6-40 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high speed steel, 6-48 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 8-32 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 10-32 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 10-36 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 12-24 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 12-28 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Tap , 10-32 thread, high carbon steel, taper tap, to start a through hole Tap, high carbon steel, 10-28 thread, tapered tap for easiest threading of a through hole, with seven to eight threads chamfered. Tap Drill: for 10-28 thread, use No. Drill-21 Clearance Drill: for 10-28 thread, use fractional Drill-13/64 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the       TAP-10-28-T . . . $16.99

has been added to your .

---