Jim Bridger's Hawken 1-1/8" breech & tang , 3/4-16 thread This 1-1/8" Hawken plug was designed by Green River Rifle Works. The tang may be bent cold. X-ray inspected for internal flaws. The short .550" thread journal allows a strong engagement and a direct drilled ignition hole. We recommend using our Jim Bridger's Hawken lock with this plug. Pre-inlet into our Jim Bridger's Hawken stock, this is our firs       PLUG-JB-18-3 . . . $79.99

H.E. Leman Indian Trade Rifle Breechplug , 3/4-16 threads for 1" octagon barrel This breechplug is tapered and flared with a rounded end. Patterned from a Indian Trade Rifle by H.E. Leman this breech plug is designed to fit a 1" octagon barrel with 3/4-16 threads and is ideal for larger calibers up to .62. The tang is just under 2" in length, and has a through hole located for the tang bolt. Wax cast of malleable 8620 steel, m       PLUG-LEMAN-16-3 . . . $20.99

H.E. Leman Indian Trade Rifle Breechplug , 5/8--18 threads for 15/16 or 1" octagon barrel This breechplug is tapered and flared with a rounded end. Patterned from a Indian Trade Rifle by H.E. Leman this breech plug is designed to fit a 15/16" octagon barrel with 5/8-18 threads and is ideal for calibers up to .54. The tang is just under 2" in length, and has a through hole located for the tang bolt. Wax cast of malleable 8620 steel, made       PLUG-LEMAN-16-5 . . . $20.99

Kit Carson's Hawken 1" Slant Breech & Tang, left hand, 3/4-16 thread Our popular Kit Carson's Hawken left hand plug matches our right plug. Annealed tang may be bent cold. Made with .550" deep thread engagement, with a direct drilled ignition hole. Pre-inlet into our left hand Kit Carson's Hawken stock. Threaded 3/4-16 for 1" octagon barrel. Apply anti-seize compound to threads, before installation. We recommend Bir       PLUG-LH-16-3 . . . $79.99

Hawken 15/16" slant faced breech & tang, 5/8-18 thread, by L&R This cleverly designed slant faced plug and tang by L&R Lock Co. is threaded 5/8-18 with .650" thread journal length, and .500" thread engagement for strength. The powder chamber is .315" diameter, ending in a large flash channel which is gently angled to the nipple seat. Most important, the plug and tang mating surfaces are machined flat, for a s       PLUG-LR-15-5 . . . $110.00

Hawken 1" slant faced breech & tang, 3/4-16 thread, by L&R This cleverly designed slant faced plug and tang by L&R Lock Co. is threaded 3/4-16 with .690" thread journal length, and .500" thread engagement for strength. The powder chamber is .375" diameter, ending in a large flash channel which is gently angled to the nipple seat. Most important, the plug and tang mating surfaces are machined flat, for a s       PLUG-LR-16-3 . . . $110.00

Flint Hawken 15/16" slant faced breech & tang, 5/8-18 thread, by L&R Pre-fitted plug and tang mating surfaces are machined and finished by L&R, for a snap fit. This well made slant faced flint plug and tang is threaded 5/8-18 with .690" thread journal length and .500" thread engagement for strength. The powder chamber is drilled .375" diameter, over one inch deep, to the center of the octagon extension. The tang swe       PLUG-LRF-15-5 . . . $110.00

Flint Hawken 1" slant faced breech & tang, 3/4-16 thread This well made slant faced flint plug and tang is threaded 3/4-16 with .625" thread journal engagement for strength. The powder chamber is drilled .375" diameter, over one inch deep, to the center of the octagon extension. The tang sweeps up to the wood, at both rear corners. Ideally suited for use with L&R's #LOCK-LR-900 right flintlock, or #LOCK-       PLUG-LRF-16-3 . . . $110.00

Long Tang Breech Plug , 5/8-18 thread, for 13/16" or 7/8" barrel Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr       PLUG-LT-14-5 . . . $14.99

Long Tang Breech Plug , 9/16-18 thread, for 13/16" or 7/8" barrel Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr       PLUG-LT-14-9 . . . $14.99

Long Tang Breech Plug , 3/4-16 thread, for 15/16" or 1" barrel Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr       PLUG-LT-16-3 . . . $16.99

Long Tang Breech Plug , 5/8-18 thread, for 15/16" or 1" barrel Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr       PLUG-LT-16-5 . . . $16.99

Long Tang Breech Plug , 3/4-16 thread, for 1-1/8" barrel Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr       PLUG-LT-18-3 . . . $17.99

Kit Carson's Hawken 1" slant breech & tang, 3/4-16 thread Our popular Kit Carson's Hawken right hand plug matches our left plug. Annealed tang may be bent cold. Made with .612" deep thread engagement, with a direct drilled ignition hole. Pre-inlet into our Kit Carson's Hawken stock. Threaded 3/4-16 for 1" octagon barrel. Apply anti-sieze compound to threads, before installation. We recommend Birchwood Cas       PLUG-RL-16-3 . . . $79.99

Breech plug, straight tang , 9/16-18 thread, for 3/4" octagon Breech Plug , flint style, straight tang, 9/16-18 thread, for 3/4" octagon, made in the USA, milled steel. Tang is about 3" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.       PLUG-ST-12-9 . . . $12.99

Breech plug, straight tang , 5/8-18 thread, for 13/16" or 7/8" octagon Breech Plug , flint style, straight tang, 5/8-18 thread, for 13/16" or 7/8" octagon, made in the USA, milled steel. Tang is about 3" length. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before drilling the tang screw hole.       PLUG-ST-14-5 . . . $10.99

Breech plug, straight tang , 9/16-18 thread, for 13/16" or 7/8" octagon Breech Plug , flint style, straight tang, 9/16-18 thread, for 13/16" or 7/8" octagon, made in the USA, milled steel. Tang is about 3" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.       PLUG-ST-14-9 . . . $10.99

Breech plug, straight tang , 3/4-16 thread, for 15/16" or 1" octagon Breech Plug , flint style, straight tang, 3/4-16 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.       PLUG-ST-16-3 . . . $12.99

Breech plug, straight tang , 3/4-16 thread, for 15/16" or 1" octagon, .550" journal length Breech Plug , flint style, straight tang, 3/4-16 thread, with .550" journal length, for 15/16" or 1" octagon. Made in the USA, milled steel. Tang is about 3-1/8" length. This special plug with .550" thread length, is pre-cut to the exact length required by our 20 or 24 gauge, and .54, or .58 caliber rifled octagon-to-round barrel. Bend the tang to       PLUG-ST-16-3-R . . . $12.99

Breech plug, straight tang , 5/8-18 thread, for 15/16" or 1" octagon Breech Plug , flint style, straight tang, 5/8-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.       PLUG-ST-16-5 . . . $12.99

Breech plug, straight tang , 9/16-18 thread, for 15/16" or 1" octagon Breech Plug , flint style, straight tang, 9/16-18 thread, for 15/16" or 1" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.       PLUG-ST-16-9 . . . $12.99

Breech plug, straight tang , 3/4-16 thread, for 1-1/8" octagon Breech Plug , flint style, straight tang, 3/4-16 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.       PLUG-ST-18-3 . . . $13.99

Breech plug, straight tang , 7/8-14 thread, for 1-1/8" octagon Breech Plug , flint style, straight tang, 7/8-14 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.       PLUG-ST-18-7 . . . $17.99

Hooked Breech Plug, for Thompson Center Hawken Rifle , percussion, 15/16" octagon, with special 11/16-20 threads Create a new barrel assembly for your Thompson Center Hawken rifle, or similar imported Hawken rifle by Investarm, Italy. Our hook will match the tang on your Cabela's, Lyman, or Investarm rifle, with very little hand fitting required. It will not fit replica rifles made in Spain. Tapped for a standard 1/4-28 nipple, order #RST-S Thompson Center d       PLUG-TC-15-11 . . . $52.99

Hooked Breech Plug, for Thompson Center Hawken Rifle , percussion, 15/16" octagon, with standard 5/8-18 threads Create a new barrel assembly for your Thompson Center Hawken rifle, or similar imported Hawken rifle by Investarm, Italy. Our hook will match the tang on your Cabela's, Lyman, or Investarm rifle, with very little hand fitting required. It will not fit replica rifles made in Spain. Tapped for a standard 1/4-28 nipple, order #RST-S Thompson Center d       PLUG-TC-15-5 . . . $52.99

has been added to your .

---