Black aluminum, with two eye disks, easily installed on a Winchester 1886 and Browning 1886 replicas. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Large 5/8" diameter knurled disk is drilled .040". Small 1/2" diameter knurled disk is drilled with a .092" aperture for

This Lehigh Valley sight is a excellent choice for a longrifle or pistol. Made in the U.S.A. from wax cast steel. Dovetail up to maximum .062" deep, .500" long, by .525" wide for 7/8" octagon, or file to fit a 13/16" barrel. Height from the bottom of the dovetail to the top of the sight notch is 0.20".

This Lehigh Valley sight is a excellent choice for a longrifle. Made in the U.S.A. from wax cast steel. Dovetail up to a maximum of .062" deep, .500" long, by .575" wide for 1" octagon, or file to fit a 15/16" barrel. Height from the bottom of the dovetail to the top of the sight notch is 0.20".

This Lehigh Valley sight is a excellent choice for a longrifle. Made in the U.S.A. from wax cast steel. Dovetail up to maximum of .062" deep, .500" long, by .620" wide for 1-1/8" octagon, or file to fit a 1-1/16" barrel. Height from the bottom of the dovetail to the top of the sight notch is 0.20".

Patterned from a tiny original antique rear sight, this very low sight is perfect for use on a Kentucky pistol or slender longrifle. Dovetail to a depth of .050". Wax cast with a .500" dovetail, about .535" wide. Height from the bottom of the dovetail to the top of the sight notch is 0.21".

Wax cast steel, this sight blank is made in the U.S.A. The dovetail is .360" long, .560" wide. Height from the bottom of the dovetail to the top of the sight notch is 0.50". The base is a full .100" deep. We do NOT recommend cutting the slot .100" deep in your barrel. Cut a .050" slot depth (not over .062" deep), and allow the base to stand above t

This primitive buckhorn rear sight has a base .375" long, .530" wide. Dovetail 0.050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.30". Use this primitive buckhorn rear sight on a 13/16 or 7/8" octagon rifle barrel. Wax cast steel. As-cast, not polished, not blued or browned. Remove the casting gate before hand fi

This primitive buckhorn rear sight has a base .435" long, .590" wide. Dovetail 0.050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.30". The base may be file fitted to smaller slots. Use this primitive buckhorn rear sight on a 15/16 or 1" octagon rifle barrel. Wax cast steel. As-cast, not polished, not blued or bro

This fixed rear sight provides a little help for older eyes. This sight base may easily be shortened to fit a more narrow dovetail. Always file the sight, never file the barrel. This sight is designed for use on a longrifle with a 13/16" or 7/8" octagon barrel, or a swamped or tapered barrel of that size. The dovetail is about .750" long, as cast,

This fixed rear sight provides a little help for older eyes. This sight base may easily be shortened to fit a more narrow dovetail. Always file the sight, never file the barrel. This sight is designed for use on a longrifle with a 15/16" or 1" octagon barrel, or a swamped or tapered barrel of that size. The dovetail is about .750" long, as cast, an

This mid-range 3" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 4-.7mm moun

This mid-range 3" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to sc

This long-range 5" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 10-28 moun

This long-range 5" Creedmoor Vernier tang sight includes two pivoting adjustment screws in the base, to allow perfectly true Vertical alignment, without file fitting the base to your tang. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to s

This classic longrifle rear sight has a base .380" long, .610" wide. Dovetail 0.050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.32". The base may be file fitted to smaller slots. Use this classic longrifle rear sight on a 15/16 or 1" octagon rifle barrel. It could be thinned for use on smaller barrels. Wax cast

This medium size full buckhorn sight has a base for a .615" dovetail and is .500" in width for 15/16" or 1" octagon barrel. Height from the bottom of the dovetail to the top of the sight notch is 0.33". Wax cast steet. Deepen the "V" as needed.

This tall semi buckhorn rear sight is blank, with no notch cut. File a "V" or square notch to your desired sight picture. The base is .530" dovetail and .700" width for barrels up to 1-1/8". Height from the bottom of the dovetail to the top of the sight notch is 0.32". Wax cast steel.

Blued steel, over 5" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 3 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D

Blued steel, over 3" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 2 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D

Blued steel, finished non-glare blue black, this Hadley eye disk is threaded 5-.5MM to fit the Vernier Tang Sight for Davide Pedersoli's 1874 Sharps rifle #RS-DP-1874, or the Soule rear sight #RS-DP-SOULE-4. The rim is knurled for easy insertion. Roll the small knurled wheel to select one of eight apertures. A small spring loaded ball detent locks

Pedersoli's Soule mid range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.26" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye

Pedersoli's Soule long range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.25" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye

Isaac Haines style, ideal for a swamped barrel, this wax cast steel sight has concave bevels on the front three edges, and a flat top. We recommend filing a square notch for use with a blade front sight. The dovetail is about .585" long, with a .535" base about .062" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.29

This rear sight has a concealed dovetail under a front and rear skirt. It will hide a rough looking slot on a 13/16” or 7/8” octagon barrel. The dovetail is about .385” as cast, it will clean up to a standard .375” dovetail. The base is .550” wide. Height from the bottom of the dovetail to the top of the sight notch is 0.39".

Wax cast steel, not polished, cut this extra long sight base sight to fit nearly any old dovetail. Cut this sight to fit your rifle, do not enlarge the dovetail slot in your barrel. Made in the U.S.A., the dovetail is about 1.250” length, and the base is .510” wide. Height from the bottom of the dovetail to the top of the sight notch is 0.33".