Charles Moore Pistol, .36 caliber, 11" barrel, percussion, walnut, iron trim, set trigger, with factory box, by Davide Pedersoli

Home > Guns > Brand name factory finished guns > DP - Davide Pedersoli - Italy

Charles Moore Pistol,
.36 caliber, 11" barrel,
percussion, walnut, iron trim, set trigger,
with factory box, by Davide Pedersoli

Part Number:	AAV-652
Availability:
Price:	$849.00
Order Quantity:

Inspired by original pieces built by Charles Moore of London, this reproduction percussion English dueling pistol was produced by Davide Pedersoli of Italy. Offered in excellent condition the pistol includes the factory carton. This pistol is fitted with a single set trigger for target shooting. The single set trigger on these pistols is excellent. The .36 caliber bore is bright, clean, and ready to shoot. The grip is neatly checkered to provide a secure grip when aiming this pistol.

The heart of the pistol is its .36 caliber octagon barrel. Measuring 11” in overall length the barrel has 7 groove fast twist rifling. We recommend using a .350” ball, .010” patch, and 18 grains of FFFg black powder. The barrel is polished bright. The left oblique flat of the barrel is stamped with the serial number and proof marks. It is also marked PEDERSOLI – ITALY CAL. 36 and BLACK POWDER ONLY. A blued iron post front sight is dovetailed directly behind the muzzle. A tall flat top blued rear sight is dovetailed just ahead of the breech to maximize the sight radius.

The walnut stock of the pistol is in excellent condition, showing no handling marks. The grip is neatly checkered. All of the furniture, including the lock, have been polished bright to match the barrel. From below the polished triggerguard and ramrod entry pipe can be seen. The wooden ramrod is fitted with a brass tip threaded to accept 10-32 cleaning and loading accessories. We recommend our #PL-5-36 to better service this pistol. Our back view shows the pair of lock bolts that pass through the stock to engage the lock on the opposite side.

The percussion lock has been polished bright to match the barrel. The lock is fitted with a fly detent, and strong mainspring for fast lock time. The blued powder drum is fitted with an iron 1/4-28 nipple for number 11 percussion caps. The nipple is surrounded with a nickel silver flash cup. The single set trigger is double phase it will fire the lock, set or unset. Push the trigger forward until it latches to set the trigger. The trigger adjustment screw directly behind the trigger controls the engagement in the set position.

This Charles Moore Pistol is offered in excellent condition with the factory box. It will be a joy to shoot at the range or in competition. Order it for a ten day visual inspection. You will be delighted. Else if it does not fit you, return it in unfired condition for same-day refund. Postage is your only risk, when you order any one-of-a-kind gun from Track, whether new, used, or antique.

Ready to order? Click VIEW CART in the upper right of the screen, review items and quantities, then click CHECK OUT. Enter your name, address, and billing information for prompt shipment. Or, PRINT your order after entering your address, attach your check or money order, and send it by mail. Shipping cost is displayed after you enter your address.

Our web site displays actual in stock status, up-to-the-minute price, and shipping cost to every address in the USA and MOST OTHER COUNTRIES. International shipping cost for extra long or heavy parcels are determined after we weigh the parcel.

Ten day inspection begins at delivery. Send your approval. Else return it for same day refund, if not delighted. Postage is your only risk.

.345" round balls, pure lead, hand cast, per 100

Part Number:	BALL-345-X
Availability:
Price:	$15.29
Order Quantity:

.350" round balls, pure lead, Hornady, per 100

Part Number:	BALL-350
Availability:
Price:	$11.79
Order Quantity:

.350" round balls, pure lead, hand cast, per 100

Part Number:	BALL-350-X
Availability:
Price:	$15.29
Order Quantity:

Track's best Black Powder BORE CLEAN Solvent, with flip-top spout

Part Number:	BORE-CLEAN
Availability:
Price:	$4.19
Order Quantity:

Ball puller, steel screw, .36 caliber brass collar, 10-32 thread

Part Number:	BP-36-10
Availability:
Price:	$3.79
Order Quantity:

Flush Nipple, 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center

Part Number:	FLUSH-RST
Availability:
Price:	$4.99
Order Quantity:

Fouling Scraper, flat face, brass, .36 caliber, 10-32 thread

Part Number:	FS-36-10
Availability:
Price:	$3.99
Order Quantity:

Jag, jagged cleaning tip, brass, .36 caliber, 5/16" rod, 10-32 thread

Part Number:	JS-36-5-10
Availability:
Price:	$4.29
Order Quantity:

Powder measure, brass, adjustable 0 to 50 grains, without spout

Part Number:	MA-050
Availability:
Price:	$15.99
Order Quantity:

Shooting patches, .015" cotton, .30 - .39 caliber, per 100, wonder-lube

Part Number:	OX-15-30-W
Availability:
Price:	$6.39
Order Quantity:

Cleaning Patches, 2" diameter, bag of 100, pure cotton flannel, for .30 to .40 caliber

Part Number:	OX-CLEAN-45C
Availability:
Price:	$4.49
Order Quantity:

Pick & Brush, brass brush with steel vent pick

Part Number:	PICK-BRUSH
Availability:
Price:	$12.00

Pick & Pan Brush, with brass chain, button clasp, and black bristle brush, for flint musket, rifle, or fowler

Part Number:	PICK-BRUSH-H
Availability:
Price:	$14.99
Order Quantity:

Pistol loading rod and short starter with .36 caliber cleaning jag, 5/16" diameter hickory rod, 10-32 threads, 12" overall usable length including .36 caliber cleaning jag

Part Number:	PL-5-36
Availability:
Price:	$19.28
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, square shank, hardened steel, ideal for restoration

Cone length: 0.440"
Thread journal length: 0.195"
Overall length: 0.635"
Diameter of base: 0.307"

Part Number:	RST-I
Availability:
Price:	$4.99
Order Quantity:

Nipple, 1/4-28 thread, for standard rifle, #11 CCI cap, stainless steel

Cone length 0.440"
Overall length: 0.635"
Thread journal length: 0.195"
Diameter of base: 0.307"

Part Number:	RST-S
Availability:
Price:	$4.99
Order Quantity:

Thomas Pickering's Tool, for flint rifles & pistols, the first U. S. issue gun tool, designed by our first U. S. Quartermaster

Part Number:	TOOL-PICK-S
Availability:
Price:	$11.99
Order Quantity:

Patch puller, corkscrew worm, steel, brass base, 10-32 thread

Part Number:	WORM-CORK-10
Availability:
Price:	$6.89

Top of Page Home > Guns > Brand name factory finished guns > DP - Davide Pedersoli - Italy