Your search for 'oversize tap'
returned
33 results.
|
Oversize Reforming Thread Taps , to repair worn or damaged 1/4-28 threads, set of three
Each set contains the three most commonly used taps: .255-28 (+.005), .260-28 (+.010), .265-28 (+.015), over size 1/4-28 taps. These are thread reforming taps. Use these taps, in sequence, to clean up a 1/4-28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thread a new
|
|
Oversize Reforming Thread Taps , to repair worn or damaged 1/4-28 threads, set of five
Each set contains five taps: .255-28 (+.005), .260-28 (+.010), .265-28 (+.015), .270-28 (+.020), .275-28 (+.025) over size 1/4-28 taps. These are thread reforming taps. Use these taps, in sequence, to clean up a 1/4-28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thre
|
|
Machine screw, for underrib, 5-40 thread, unplated, steel
This nice quality unplated #5-40 flat head screw is made for mounting a rib, or for mounting any Hawken or English triggerguard which lacks a threaded stud, to a triggerplate. A bit smaller diameter than our #6-40 rib screw, that larger screw can easily be used to replace a worn #5-40 rib screw, when a worn or damaged oversize hole is retapped to #
|
|
Machine screw, for underrib, 6-40 thread, unplated, steel
This nice quality unplated #6-40 flat head screw is made for mounting a rib, or for mounting any Hawken or English triggerguard which lacks a threaded stud, to a triggerplate. Overall length 0.3", thread journal 0.2". A bit larger diameter than our standard #5-40 rib screw, this screw can easily be used to replace a worn #5-40 rib screw, when the
|
|
English gun flint , 1-1/4 x 1-3/8", largest flint musket, wall gun, strike-a-light. We are temporarily limiting purchase of this item to twelve per order. We will manually edit your order if your order exceeds that amount.
Oversized flint, 1-1/4 x 1-3/8” for big military muskets, wall guns, African trade guns, early flint guns with oversize locks. The finest natural flint occurs as dense grey-black nodules, within chalk deposits. Tom Fuller, a young man with a deep interest in the tradition and “lost art" of flintknapping, continued the trade. A premier gun flint mak
|
|
Cartridge Case, .577 Snider , unprimed, use large rifle primer, correct head stamp, made in the U.S.A. each piece, no minimum
Our new brass .577 Snider cartridge is designed for use in Snider Enfield Mark I, II, and III muskets. The .577 Snider cartridge existed long before SAAMI standards, so bore diameter and chamber dimensions of antique guns may vary. This unprimed brass case uses a large rifle primer. The case has a overall length of 2.0", mouth outer diameter of 0.6
|
|
Siler Flint Lock Kit , for gunmakers
Gunmakers flintlock kit is a Siler flint kit, with an oversize plate.If you are familiar with the internal workings of flintlocks, our Siler kit can be assembled into a fine lock. All holes to be drilled in the plate are spotted. A drill guide is included to aid you in accurately locating holes. Springs are hardened and tempered. Kits come with ins
|
|
Hooked Breech Plug, for Thompson Center Hawken Rifle , percussion, 15/16" octagon, with standard 5/8-18 threads
Create a new barrel assembly for your Thompson Center Hawken rifle, or similar imported Hawken rifle by Investarm, Italy. Our hook will match the tang on your Cabela's, Lyman, or Investarm rifle, with very little hand fitting required. It will not fit replica rifles made in Spain. Tapped for a standard 1/4-28 nipple, order #RST-S Thompson Center d
|
|
Hooked Breech Plug, for Thompson Center Hawken Rifle , percussion, 15/16" octagon, with special 11/16-20 threads
Create a new barrel assembly for your Thompson Center Hawken rifle, or similar imported Hawken rifle by Investarm, Italy. Our hook will match the tang on your Cabela's, Lyman, or Investarm rifle, with very little hand fitting required. It will not fit replica rifles made in Spain. Tapped for a standard 1/4-28 nipple, order #RST-S Thompson Center d
|
|
Build Track's J. P. Beck Lebanon Township parts set with "B" or "C" profile, 44" swamped barrel, cut for sliding wood patchbox Price: starting at $1,196.09
Build Track's John Philip Beck Lebanon Township, Lancaster, Pennsylvania, 44" swamped barrel, traditional brass or iron trim, plain, or fancy maple stock with sliding wood patchbox We offer these fine Lebanon Township, Lancaster County style parts, modeled after the work of John Philip Beck. Lebanon township is located just to the north of Lancas
|
|
Build Track's Jacob Dickert , Lancaster County, Pennsylvania longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $1,048.00
Build Track's Jacob Dickert Lancaster kit, easy to assemble, up to 42" octagon barrel, traditional brass, or iron trim, plain or fancy maple stock We offer these fine Lancaster County style parts, modeled after the work of Jacob Dickert. Arriving from Germany to America about 1750, he studied under a unknown master learning the gunmakers art. He
|