Items Per Page:
|< First < Previous Viewing page 1 of 2 Next > Last >|
1  | 2
Nipple Wrenches
Nipple Wrenches

Nipple Wrenches
Nipple Wrenches





 Nipple Wrench for Rifles & Shotguns , slotted end for #11 nipple Nipple Wrench for Rifles & Shotguns , slotted end for #11 nipple
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! This well tempered nipple wrench has two sturdy finger
    In Stock   NW-120 . . . $9.99

 Nipple Wrench for Rifles & Pistols , small slotted socket end, for small nipples Nipple Wrench for Rifles & Pistols , small slotted socket end, for small nipples
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! Our smallest socket wrench has a .3/8" body tapering do
    In Stock   NW-170 . . . $9.99

 Nipple Wrench for Muskets , with slotted socket, for square or flat side nipples Nipple Wrench for Muskets , with slotted socket, for square or flat side nipples
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! This well tempered slotted end wrench works well for he
    In Stock   NW-100 . . . $9.99

 Nipple Wrench for Revolvers , for 1858 Remington .44 Revolver, .31 & .36 Pocket & Police Model Colt Revolvers, and other revolvers with a tight nipple recess Nipple Wrench for Revolvers , for 1858 Remington .44 Revolver, .31 & .36 Pocket & Police Model Colt Revolvers, and other revolvers with a tight nipple recess
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! #NW-130 wrench has a .187" slot in a .29" shaft to fit
    In Stock   NW-130 . . . $9.99

 Nipple Wrench for Revolvers , for .36 & .44 Colt Army & Navy Models, and other revolvers with a large nipple recess. Nipple Wrench for Revolvers , for .36 & .44 Colt Army & Navy Models, and other revolvers with a large nipple recess.
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! #NW-140 wrench has a .187" slot in a .34" shaft, to fit
    In Stock   NW-140 . . . $9.99

 Nipple , 1/4-28 thread, 1/4" height for Classic Arm "Snake Eyes" pistol & Classic Arms "Ethan Allen" Pepperbox pistol, #11 CCI cap, stainless steel. Use nipple wrench NW-170 Cone length: 0.255" Thread journal length: 0.155" Overall length: 0.410" Diameter of base: 0.365" This nipple will not fit Hoppe's - Ethan Allen brand replica Snake Eyes Nipple , 1/4-28 thread, 1/4" height for Classic Arm "Snake Eyes" pistol & Classic Arms "Ethan Allen" Pepperbox pistol, #11 CCI cap, stainless steel. Use nipple wrench NW-170 Cone length: 0.255" Thread journal length: 0.155" Overall length: 0.410" Diameter of base: 0.365" This nipple will not fit Hoppe's - Ethan Allen brand replica Snake Eyes
    In Stock   PST-SE-CA-S . . . $4.99

 Nipple Wrench for Walker , a special replica designed for Colt .44 Walker & .44 Dragoon revolvers. Nipple Wrench for Walker , a special replica designed for Colt .44 Walker & .44 Dragoon revolvers.
This replica early Colt nipple wrench is made for Colt Walker and Dragoon nipples. Notice the unique goose-neck shape, with screwdriver bit at the end. Well made, with heavy duty construction, of blued steel. Lubricate your percussion nipple threads with #BC-CTL Choke Tube Lube, and easily remove them, even after hundreds of shots. This special gre
    Out of Stock, request notification when available.   NW-WALKER . . . $29.99

 Flush Nipple , 8-1.25mm thread, stainless steel, with 1/4" square shank for nipple wrench, fits Italian Enfield replicas Flush Nipple , 8-1.25mm thread, stainless steel, with 1/4" square shank for nipple wrench, fits Italian Enfield replicas
Made of stainless steel with a 1/4' square lug for a nipple wrench, "O" ring, and a large hole for better flushing action. Nipple end turned for 3/16" tubing, included. Fits Italian Enfield replicas as well as the drum or touchhole threads into the barrel on Pedersoli and most Hatfield rifles
    In Stock   FLUSH-EMI . . . $8.99

 Flush Nipple , 8-1mm thread, stainless steel, with 1/4" square shank for nipple wrench, fits Italian Springfield replicas Flush Nipple , 8-1mm thread, stainless steel, with 1/4" square shank for nipple wrench, fits Italian Springfield replicas
Made of stainless steel with a 1/4' square lug for a nipple wrench, "O" ring, and a large hole for better flushing action. Nipple end turned for 3/16" tubing, included. Fits most Italian manufactured Springfield replicas.
    In Stock   FLUSH-MMI . . . $8.99

 Flush Nipple , 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center Flush Nipple , 1/4-28 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Thompson Center
Made of stainless steel, with a 1/4" square lug for a nipple wrench. "O" ring, and a large hole for better flushing action. Nipple end turned for 3/16" tubing, included.
    In Stock   FLUSH-RST . . . $4.99

 Flush Nipple , 6-1mm thread for Spanish rifles, stainless steel, 1/4" square shank for nipple wrench, with tubing, fits CVA, Jukar, Traditions, Ardessa, Dikar Flush Nipple , 6-1mm thread for Spanish rifles, stainless steel, 1/4" square shank for nipple wrench, with tubing, fits CVA, Jukar, Traditions, Ardessa, Dikar
Made of stainless steel with 1/4" square shank for a nipple wrench, "O" ring, and a large hole for better flushing action. Nipple end is turned for 3/16" vinyl tubing, included.
    In Stock   FLUSH-CVA . . . $4.99

 Flush Nipple , 5/16-24 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Springfield and similar Muskets Flush Nipple , 5/16-24 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Springfield and similar Muskets
Made of stainless steel, with a 1/4" square lug for a nipple wrench. "O" ring, and a large hole for better flushing action. Nipple end turned for 3/16" tubing, included.
    In Stock   FLUSH-MMS . . . $8.99

 Flush Nipple , 6-.75mm thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Lyman rifles Flush Nipple , 6-.75mm thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Lyman rifles
Made of stainless steel with a 1/4" square lug for installation with a nipple wrench, "O" ring, and a large hole for better flushing action. Nipple end turned for 3/16" tubing, included.
    In Stock   FLUSH-RLP . . . $4.99

 Flush Nipple , 5/16-18 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits British Enfield and similar muskets Flush Nipple , 5/16-18 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits British Enfield and similar muskets
Made of stainless steel with a 1/4' square lug for a nipple wrench, "O" ring, and a large hole for better flushing action. Nipple end turned for 3/16" tubing, included.
    In Stock   FLUSH-EMS . . . $8.99

 Flush Nipple , 1/4-32 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Numrich and Hopkins & Allen Flush Nipple , 1/4-32 thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Numrich and Hopkins & Allen
Made of stainless steel with a 1/4" square lug for installation with a nipple wrench, "O" ring, and a large hole for better flushing action. Nipple end turned for 3/16" tubing, included.
    In Stock   FLUSH-RNA . . . $4.99

 Nipple, 1/4-28 thread for rifle, with cone for military musket cap, hardened steel, requires NW-100 musket nipple wrench Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307" Nipple, 1/4-28 thread for rifle, with cone for military musket cap, hardened steel, requires NW-100 musket nipple wrench Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
Nipple, 1/4-28 thread, hardened steel, for musket cap, requires NW-100 musket nipple wrench
    In Stock   RST-MI . . . $7.99

 Nipple Wrench for Rifles , short style, with slotted end Nipple Wrench for Rifles , short style, with slotted end
Our wrenches feature a high carbon steel body with a low carbon steel rod handle. Special commercial tempering gives optimum strength to the wrench fingers. The malleable handle will flex if excess torque is applied, to avoid damage. Our wrenches are not unbreakable, but they are pretty close! Our most popular wrench, light enough to fit in your po
    In Stock   NW-160 . . . $9.99

 Nipple , 12-28 thread, for Thompson Center Seneca and Cherokee rifles, & T/C Patriot pistol, #11 CCI cap, stainless steel Cone length: 0.300" Thread journal length: 0.200" Overall length: 0.500" Diameter of base: 0.305" Use nipple wrench #NW-170 Nipple , 12-28 thread, for Thompson Center Seneca and Cherokee rifles, & T/C Patriot pistol, #11 CCI cap, stainless steel Cone length: 0.300" Thread journal length: 0.200" Overall length: 0.500" Diameter of base: 0.305" Use nipple wrench #NW-170
    In Stock   PTC-S . . . $4.99

 Nipple, 1/4-28 thread for rifle, with cone for military musket cap, stainless steel, requires NW-100 musket nipple wrench Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307" Nipple, 1/4-28 thread for rifle, with cone for military musket cap, stainless steel, requires NW-100 musket nipple wrench Cone length: 0.440" Thread journal length: 0.195" Overall length: 0.635" Diameter of base: 0.307"
    In Stock   RST-MS . . . $7.99
|< First < Previous Viewing page 1 of 2 Next > Last >|
1  | 2
 
Track of the Wolf, Inc.
18308 Joplin St NW
Elk River, MN 55330-1773

For your convenience you can contact us via our on-line form
Contact the Webmaster if you have any problems with this site.
Privacy Policy        Copyright © 2024Track of the Wolf, Inc.
Accepted Credit Cards