Hammer, percussion, left, 1.65" throw, wax cast steel, as cast hammer, percussion, left, wax cast steel, as cast       LOCK-SL-CK-L-HA . . . $21.00

Hammer, percussion , 1.65" throw, wax cast steel, as cast percussion hammer, 1.65" throw, wax cast steel, as cast       LOCK-SL-CK-HA . . . $21.00

Schuetzen, percussion, right hand lock, with dolphin hammer, by L&R Lock Co. Schuetzen Percussion Lock This lock is shown at exact-full-size , in Track's new catalog for gunmakers and gunsmiths.

English Bar Lock right Percussion Lock, with Express hammer, by L&R English Bar right Percussion Lock, with Express hammer The English “bar" lock is so-called because it uses a “drip bar" soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used “bar       LOCK-LR-500-S . . . $160.00

English Bar Lock left Percussion Lock, with Express hammer, by L&R English Bar Lock left Percussion Lock, with Express hammer The English “bar” lock is so-called because it uses a “drip bar” soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used       LOCK-LR-600-S . . . $160.00

English Bar Lock right Percussion Lock, with early flat hammer, by L&R English Bar right Percussion Lock, with early flat hammer The English “bar" lock is so-called because it uses a “drip bar" soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used       LOCK-LR-500 . . . $160.00

English Bar Lock left Percussion Lock, with early flat hammer, by L&R English Bar left Percussion Lock, with early flat hammer The English “bar” lock is so-called because it uses a “drip bar” soldered to the barrel, instead of wood above the lock plate. This improvement eliminates wood in this critical area ahead of the nipple, where constant over-spray might char it. Most better London & Birmingham makers used “b       LOCK-LR-600 . . . $160.00

hammer, right, wax cast steel, 1.625" throw, percussion hammer, right, wax cast steel, 1.625" throw, percussion       LOCK-LR-1500-HA . . . $25.50

hammer, left, wax cast steel, 1.625" throw, percussion hammer, left, wax cast steel, 1.625" throw, percussion       LOCK-LR-3500-HA . . . $25.50

Hammer for Investarms Lyman Great Plains & Gemmer Hawken Rifle lock, percussion, right hand Hammer for Investarms Lyman Great Plains & Gemmer Hawken Rifle lock, percussion, right hand       LOCK-GPR-P-HA . . . $38.00

Ethan Allen and Allen & Wheelock, their Guns and their Legacy by Paul Henry A comprehensive guide to the firearms of one of America's most important gunmakers Ethan Allen. In this study, Paul Henry illustrates and identifies the whole Allen product line, with special focus upon Allen & Wheelock, showing how features and designs evolved over time. Pepperboxes, barhammer pistols, inline pistols, boot pistols, bar hammer revo       BOOK-EAAW . . . $58.50

Golden Age Percussion Conversion Lock, by Jim Chambers A true conversion, this percussion lock retains the pan molding, flash fence, and hole for frizzen pivot screw. Converted original locks often have an empty hole, or tap the hole and plug it with a screw. Parts and screws are the same as on the flint lock, except for the cap lock’s unique plate, pan bolster, and the percussion hammer. This is a fin       LOCK-GA-CR . . . $230.00

S. Hawken left hand, percussion lock, by L&R Sam Hawken and other makers used these locks on Plains rifles, Ohio rifles and late longrifles, during the later percussion era of 1845 to 1885. Thomas Gibbons of St. Louis made and signed many locks. Note the square inside corner at the front of the lock plate, and the normal narrow percussion hammer, both late features. Fitted with a fly detent f       LOCK-LR-200 . . . $160.00

S. Hawken right hand, percussion lock, by L&R Sam Hawken and other makers used these locks on Plains rifles, Ohio rifles and late longrifles, during the later percussion era of 1845 to 1885. Thomas Gibbons of St. Louis made and signed many locks. Note the square inside corner at the front of the lock plate, and the normal narrow percussion hammer, both late features. Fitted with a fly detent f       LOCK-LR-100 . . . $160.00

Enfield Musketoon , .58 caliber, 24" barrel, percussion, walnut, brass, used by Davide Pedersoli & Co. This Enfield Musketoon, with 24" barrel, is dated 1861 on the lock plate. Made for the caliber .577 hollow base Minie bullet that allowed quick reloading, achieved fine accuracy, and much longer range than the round ball muskets of an earlier generation. The rear sight is calibrated and marked in 100 yard increments, up to 600 yards. Enfield musket       AAV-656 . . .

Antique Belt Pistol , .58 caliber, 7" swamped barrel, percussion conversion lock, checkered walnut, iron trim This antique percussion conversion belt pistol has a French influence with a neatly checkered grip. This pistol has a .58 caliber rifled swamped octagon barrel. The bore is bright and has been well maintained. The stock is solid and does not show any cracks or repairs. The pistol was original finished as a flint lock, which was later converted to p       AAV-048 . . . $1,759.00

Antique Austrian Model 1854 Lorenz Jaegerstutzen , .54 caliber, 28" octatgon-to-round barrel, chipped and replaced wood, missing original rear sight, percussion, iron furniture, well aged patina During the American Civil War the Europeans states sold thousands of arms to both sides. The Austrian Model 1854 musket was imported by both the Union and Confederacy for use in the American Civil War in large numbers. Smaller numbers, some estimates of 6000 to Union and unknown Confederacy, of what is sometimes called a Lorenz short rifle, or Jaeg       AAV-753 . . .

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 8-32 female thread to fit metal ramrod Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 8-32 male thread will fit your metal ramrod end, on military rifle, if it has 8-32 threads. You can easily enlarge the hole and tap it to fit a 12-24 ramrod tip for an 1803 Harper's Ferry Rifle, or other popular metal rod. The extra length will gi       BP-1817-08-F . . . $10.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 8-32 male thread Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 8-32 male thread will fit your ramrod tip. The extra length will give you a better grip on your ramrod. Stuck ball? No powder? Our first technique is to "prime" the bore, feeding a small amount of FFFFg under the nipple or into the vent hole. Firi       BP-1817-08-M . . . $10.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 10-32 female thread to fit metal ramrod Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 10-32 male thread will fit your metal ramrod end, on your Brown Bess, Springfield, Charleville, or Zouave musket, if it has 10-32 threads. You can easily enlarge the hole and tap it to fit a 12-24 ramrod tip for an 1803 Harper's Ferry Rifle, or ot       BP-1817-10-F . . . $12.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 10-32 male thread Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 10-32 male thread will fit your ramrod tip. The extra length will give you a better grip on your ramrod. Stuck ball? No powder? Our first technique is to "prime" the bore, feeding a small amount of FFFFg under the nipple or into the vent hole. Fir       BP-1817-10-M . . . $12.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 12-24 female thread to fit metal ramrod Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 10-32 male thread will fit your metal ramrod end, on your Brown Bess if it has 12-24 threads. The extra length will give you a better grip on your ramrod. Stuck ball? No powder? Our first technique is to "prime" the bore, feeding a small amount of       BP-1817-12-F . . . $12.99

M. Medina Hawken right hand, percussion lock, by L&R This L&R Lock Company M. Medina Hawken percussion lock was designed by the late Don Stith. Notice the early style rounded front edge vs. the square corner found on later locks. The lock plate also has a bit more curve from end to end than later percussion locks. The percussion hammer has cast-in engraving with a 1.8" throw. The lock plate is 4.5" l       LOCK-LR-100-M . . . $160.00

S. Hawken , right hand, percussion lock, notched for breechplug, by L&R We offer our Thomas Gibbons style S. Hawken cap lock pre-notched for our #Plug-LR-16-3 breech plug and tang. On receipt of this lock, plug, and tang, you will notice that the notch is about .010” too shallow at the bottom, not bad for an “as cast” fit. Two or three swipes with the rounded side of a fine cut file will provide the needed clearance at       LOCK-LR-125 . . . $160.00

Lyman Pick & Brush Set , four plastic double ended picks, nylon brush, and brass brush Lyman's Pick and Brush Set allows you to clean all those hard to reach grooves and corners that can't be reached with patches. The plastic picks come in a variety of shapes and so that you'll have the just the right size to fit into those tight spots. A nylon brush and stiffer brass brush are included to remove stubborn powder residue, including in       LYMAN-PICK-SET . . . $3.99

has been added to your .

---