Cartridge Case, .577 Snider , unprimed, use large rifle primer, correct head stamp, made in the U.S.A. each piece, no minimum Our new brass .577 Snider cartridge is designed for use in Snider Enfield Mark I, II, and III muskets. The .577 Snider cartridge existed long before SAAMI standards, so bore diameter and chamber dimensions of antique guns may vary. This unprimed brass case uses a large rifle primer. The case has a overall length of 2.0", mouth outer diameter of 0.6       CASE-577-SNIDER . . . $4.49

Cartridge Case , .577-Snider, unprimed brass, use large rifle primer, correct head stamp, made in the U.S.A. 20 pieces This new production all brass .577 Snider cartridge is designed for used with the Snider Enfield Mark I, II, and III muskets. The .577 Snider cartridge existed long before SAAMI standards and antique guns may vary on bore diameter and chamber dimensions. This unprimed brass uses a large rifle primer. The case has a overall length of 2", mouth diame       CASE-577-SNIDER-020 . . . $84.59

Cartridge Case , .577-Snider, unprimed brass, use large rifle primer, correct head stamp, made in the U.S.A. 50 pieces This new production all brass .577 Snider cartridge is designed for used with the Snider Enfield Mark I, II, and III muskets. The .577 Snider cartridge existed long before SAAMI standards and antique guns may vary on bore diameter and chamber dimensions. This unprimed brass uses a large rifle primer. The case has a overall length of 2", mouth diame       CASE-577-SNIDER-050 . . . $204.99

Ramrod for Mortimer 12 gauge shotgun by Davide Pedersoli , 3/8" tapered hickory, 34-7/8" lock, Brass tips, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod Ramrod, 34-7/8" hickory, stained brown, tapered, with brass tips, for 12 ga Davide Pedersoli & Co. Mortimer shotgun. The front end is fitted with a correct tulip shaped flared brass tip for pushing wads and cards. The rear end is fitted with a hardened and tempered sharp steel wad worm, concealed under a brass tip. The rear 13-1/4" are tapered to       RAMROD-347-MORTIMER-12-H . . . $34.99

Antique Double Barrel Shotgun , 12 gauge, 32" Damascus barrels, percussion, walnut, iron furniture, made in Belgium This antique double barrel percussion shotgun is stocked in checkered walnut with damascus 12 gauge barrels.  The barrels have Belgian proof marks, but otherwise this shotgun is unsigned. The furniture is iron with a brass cap box and nickel silver escutcheon plates around the wedge key. The stock has some sanding marks, and a gloss finish has been       AAV-692 . . . $999.00

Gentlemen's fowler bag , fine leather, 8" by 11", with Irish shot snake Our best quality and most costly bag for the serious shotgunner. Two large inside pockets hold wads. This 8" x 11" bag is a full 3" deep. It will hold every item you may need in the field. An Irish shot flask is mounted on the two inch shoulder strap. Two brass buckles anchor the strap, which may be switched to allow left hand use. Two long leather       BAG-FOWLER . . . $264.99

Barrel, 20 gauge , 30" octagon-to-round, smooth bored, crowned, threaded for 3/4-16 plug Tapered octagon-to-round 20 gauge smoothbore barrel, exclusively from Track® Our 20 gauge barrel is our most popular octagon-to-round barrel, offered in 30" lengths. Our 20 gauge 30" barrel exactly fits Track's own pre-inlet stocks: Track's English Fowling Gun stock Track's North West Trade Gun stock Our 20 gauge barrel also fits certain oth       BBL-20-30 . . . $229.00

Barrel, 20 gauge , 36" octagon-to-round, smooth bored, crowned, threaded for 3/4-16 plug Tapered octagon-to-round 20 gauge smoothbore barrel, exclusively from Track® Our 20 gauge barrel is our most popular octagon-to-round barrel, offered in a 36" or 42" length. Both sizes are identical, except for length, and other lengths may be ordered up to 42" at small extra cost. Our 20 gauge 36" barrel exactly fits Track's own pre-inlet stocks:       BBL-20-36 . . . $249.00

Barrel, 20 gauge , 42" octagon-to-round, smooth bored, crowned, threaded for 3/4-16 plug Tapered octagon-to-round 20 gauge smoothbore barrel is made in the U.S.A., exclusively for Track® by Colerain Barrel Company. Our 20 gauge barrel is our most popular octagon-to-round barrel, offered in 36" or 42" lengths. Both sizes are identical, except for length, other lengths may be ordered up to 42" at small extra cost. Track's best 20 gauge 4       BBL-20-42 . . . $259.00

Barrel, 24 gauge , 42" octagon-to-round, smooth bored, crowned, threaded for 3/4-16 plug Tapered octagon-to-round 24 gauge smoothbore barrel, exclusively from Track® Our 24 gauge barrel has the identical outside dimensions as our most popular 20 gauge octagon-to-round barrel. Offered in 42" length. Other lengths may be ordered up to 42" at small extra cost. Track's best 24 gauge 42" barrel exactly fits Track's pre-inlet stocks: Track'       BBL-24-42 . . . $259.00

Barrel, 20 gauge, Fowler , .620" smooth bore, 44" octagon-to-round, "C" profile, 4.2 lb, flared tang plug, made in the U.S.A. Made with pride in the U.S.A. to meed the demands of today's shooters. Our 44" smooth bore fowler barrel is made for fullstock flint fowling guns, fusils, and muskets. The 20 gauge bore is .620" diameter, ideal for a patched round ball, or lead or bismuth shot with wads and cards. The tapered octagon breech is 15" long, with a wedding band transiti       BBL-FOWL-20-44 . . . $279.00

Black Powder, Pig Lead and Steel Silhouettes by Paul Matthews This book contains specific information for shooters to gain more understanding on the operation and approach to accurate and reliable loading and shooting. Soft bound volume of 122 pages. The Table of Contents includes the following : Dedication Preface Chapter 1 Over the Cross-Sticks Chapter 2 Observations of the Bullet Chapter 3 Barrels an       BOOK-BPPLSS . . . $22.50

The Golden Age of the American Schuetzenfest, a History and Study of the Marksman's Art by Randolph Schreiter Wright From the 1890's until the U.S. entry into World War I, the target shooting game known as Schuetzen was in its Golden Age. Rifle shooing contests were held at Schuezten parks across the U.S. in cities large and small. With deep European roots, Schuetzen has origins that reach back more than half a millennium. Immerse yourself in the history of the S       BOOK-GA-AS . . . $48.99

Reloading Tools, Sights & Telescopes for Single Shot Rifles by Gerald O. Kelver This book details the various types of hand reloading tools, and the sights and telescopes that have been used through the years on single-shot rifles. Many of the companies that produced these items, as well as individuals who custom made them, have been mentioned. An entire chapter has been devoted to the Schuetzen rifle. Valuable information fro       BOOK-RTST . . . $13.95

SPG Black Powder Cartridge Reloading Primer , revised 9th edition, 20 plus new pages by Mike Venturino & Steve Garbe This superb loading manual specializes in black powder cartridge data for popular and rare calibers, from 32-40 to 50-140, including Sharps, Remington and Ballard cases. Wire bound, 6 x 9" format, with 150 pages. Drop tables for cast bullets will put you on target at long range. Steven P. Garbe invented SPG lube. He uses these loads to win the Nati       BOOK-SPG . . . $34.95

Cartridge Case , .43 Spanish Remington Rolling Block, unprimed brass, correct headstamp, use large rifle primer, each Cartridge case, .43 Spanish Remington Rolling Block, unprimed brass, correct caliber headstamp, use large rifle primer. BE AWARE: Not all .43 Spanish chambers are alike. These cases are made to a .521" head diameter, dimensioned from a period Spanish print. These seem to fit the majority of guns we encounter. If you have a Argentine Modello Rolling       CASE-43-SPANISH . . . $3.99

Powder Compression Plug , .38 caliber, to fit our Lee 7/8-14 die This black powder compression plug is slightly under .38 caliber, to compress the powder and over-powder card to the correct depth, to allow hand seating your bullet, in .38 caliber cartridges. Ideal for loading .38-55 WCF, .38-56 Winchester, .38-50 Ballard, and similar .38 caliber cartridges. The length of the Lee die body limits the expander plug       DIE-38-COMPRESS . . . $3.99

Powder Compression Plug , .40 caliber, to fit our Lee 7/8-14 die This black powder compression plug is slightly under .40 caliber, to compress the powder and over-powder card to the correct depth, to allow hand seating your bullet, in .40 caliber cartridges. Ideal for loading .38-40 WCF, .40-65 WCF, .40-60 Marlin, .40-63 Everlasting, .40-70 Ballard, .40-70 Sharps Staight, .40-70 Sharps Bottleneck, and similar .4       DIE-40-COMPRESS . . . $3.99

Neck Expander Plug , .439" diameter, to fit our Lee 7/8-14 die This neck expander plug is .439" diameter, for loading lead .439" sized bullets, for a perfect fit without deformation, in Remington Rolling Block .43 Spanish, .43 Reformado, .43 Egyptian, and similar .43 caliber cartridges. We can supply .43 Spanish cartridge cases, cast bullets sized .439" with SPG lubricant, loading dies, bullet mold, bullet siz       DIE-439-EXP . . . $3.99

Powder Compression Plug , .43 caliber, to fit our Lee 7/8-14 die This black powder compression plug is slightly under .43 caliber, to compress the powder and over-powder card to the correct depth, to allow hand seating your bullet, in .43 caliber cartridges. Ideal for loading .43 Spanish Remington, .43 Reformado, .43 Egyptian, and similar .43 caliber cartridges. The length of the Lee die body limits the expander       DIE-43-COMPRESS . . . $3.99

Neck Expander Plug , .446" diameter, to fit our Lee 7/8-14 die This neck expander plug is .446" diameter, for loading lead .446" sized bullets, for a perfect fit without deformation, in .44-77 Sharps, .44-90 Remington, and similar .44 caliber cartridges. We can supply .44-77 cartridge cases, cast bullets sized .446" with SPG lubricant, loading dies, bullet mold, bullet sizing die, and wad punch. New .44-77 cas       DIE-446-EXP . . . $3.99

Powder Compression Plug , .44 caliber, to fit our Lee 7/8-14 die This black powder compression plug is slightly under .44 caliber, to compress the powder and over-powder card to the correct depth, to allow hand seating your bullet, in .44 caliber cartridges. Ideal for loading .44-77 Sharps, .44-90 Remington, and similar .44 caliber cartridges. The length of the Lee die body limits the expander plug's use, in mos       DIE-44-COMPRESS . . . $3.99

Powder Compression Plug , .45 caliber, to fit our Lee 7/8-14 die This black powder compression plug is slightly under .45 caliber, to compress the powder and over-powder card to the correct depth, to allow hand seating your bullet, in .45 caliber cartridges. Ideal for loading .45-70 Government, .45-90 WCF, .45-100 2-6/10" Sharps, .45-110 2-7/8" Sharps, and similar .45 caliber cartridges. The length of the Lee di       DIE-45-COMPRESS . . . $3.99

Button jagged cleaning tip, 10 gauge, brass, 10-32 thread Flat end squarely seats cards and wads. Jagged edges grip the damp patch securely while wiping the dirty bore between shots.       JAG-10-10 . . . $4.29

Button jagged cleaning tip, 10 gauge, brass, 8-32 thread Flat end squarely seats cards and wads. Jagged edges grip the damp patch securely while wiping the dirty bore between shots.       JAG-10-8 . . . $4.29

has been added to your .

---