Enfield Rifle Lock , circa 1853 Crown P-H mark, unused, excellent Made for use on an 1853 Enfield Rifle Musket, this new lock has been drilled for two lock bolts, but never tapped, never installed on a replica Enfield three band rifled musket. Probably made after 1979 for a replica of the Enfield Musket issued to the East India Company, the lock is finished to a dark blue. The hammer and lock plate are engraved w       LOCK-ENFIELD . . . $69.99

Tumbler , machined steel, hardened and tempered Tumbler , machined steel, hardened and tempered, no fly pocket - use with single trigger only.       LOCK-FUSIL-TU . . . $25.00

Percussion Lock, Rifle, Ohio - Goulcher , by R. E. Davis Goulcher Percussion Lock The Goulcher family made thousands of locks. They are found on plains rifles, late longrifles, pistols and shotguns of the 1840 to 1880 era. This Goulcher lock is pre-inlet in our Vincent rifle stock. Cut for a 1/2” powder drum. The lock has an engraved hammer with 1.65” throw, for barrels from 13/16" to 1” octagon.       LOCK-GG-SR . . . $165.00

Germanic Jaeger Rifle Flint Lock, by R. E. Davis Co. This nice large flint lock is distinctly “Germanic” style for use on transitional American longrifles of the 1750-1760 era. This lock is made for Track, by the R. E. Davis Company. Intended for use on “transitional” longrifles, so-called because they fit midway between the early short barreled “Jaeger” hunting rifles, and the classic longrifles we       LOCK-JAEGER . . . $225.00

Jim Bridger's Hawken percussion lock, left hand, by R.E. Davis Left hand shooters can build a Hawken, using our left hand Jim Bridger Hawken lock. Wax castings are nicely finished, tempered, assembled, and signed by R. E. Davis. Smooth internal parts, polished critical points and bearing surfaces, and a heavy duty mainspring give this lock a crisp action. Fitted with a fly, this lock works well with Hawken sty       LOCK-JB-L . . . $155.00

Jim Bridger's Hawken percussion lock, right hand, by R.E. Davis Designed by Ron Long, this famous lock was used by Green River Rifle Works of Roosevelt, Utah, on their Jim Bridger Hawken rifle. Track acquired the GRRW Bridger hawken stock pattern. We offer Bridger Hawken stocks pre-inlet for the right lock. Wax castings are nicely finished, tempered, assembled, and signed by R. E. Davis. Smooth internal parts,       LOCK-JB-R . . . $155.00

Classic Ketland an 1810-1820 era flintlock, by Jim Chambers Perhaps the most popular style of flint lock found on fine original antique American longrifles, this attractive medium size rifle lock is based on our best Siler internal lock parts. You can be assured of long life, and easy service, if ever needed. Notice the pointed tail and rounded pan of the lock plate. The tail of the lock plate is slightly l       LOCK-KL-FL-RH . . . $295.00

Late Ketland 1820 era flintlock, by R.E. Davis Consider our late Ketland flint lock for your next Tennessee rifle, Golden Age flint longrifle, fullstock Hawken flint rifle, 1820 era English Sporting rifle, or London style late flint fowling gun. A highly refined and complex lock, this design incorporates many of the features invented by London's best gunmakers during the late flint period, prio       LOCK-LK-F . . . $225.00

S. Hawken right hand, percussion lock, by L&R Sam Hawken and other makers used these locks on Plains rifles, Ohio rifles and late longrifles, during the later percussion era of 1845 to 1885. Thomas Gibbons of St. Louis made and signed many locks. Note the square inside corner at the front of the lock plate, and the normal narrow percussion hammer, both late features. Fitted with a fly detent f       LOCK-LR-100 . . . $160.00

Late English Flint Lock , left hand, with gooseneck cock, made in the USA, by L&R Late English left Flint Lock L&R’s late flint lock is sometimes called a “Hawken” flint lock. Use it on American longrifles of the 1800 to 1830 era, fullstock Plains rifles, Hawken rifles, Tennessee rifles, English fowling guns and London style flint fullstock and half-stock sporting rifles. This nice left flint lock is made to fit our left hand       LOCK-LR-1000 . . . $229.00

Late English Flint Lock , left hand, with re-inforced cock, made in the USA, by L&R Late English left Flint Lock L&R’s late flint lock is sometimes called a “Hawken” flint lock. Use it on American longrifles of the 1800 to 1830 era, fullstock Plains rifles, Hawken rifles, Tennessee rifles, English fowling guns and London style flint fullstock and half-stock sporting rifles. This nice left flint lock is made to fit our left hand       LOCK-LR-1000-D . . . $229.00

M. Medina Hawken right hand, percussion lock, by L&R This L&R Lock Company M. Medina Hawken percussion lock was designed by the late Don Stith. Notice the early style rounded front edge vs. the square corner found on later locks. The lock plate also has a bit more curve from end to end than later percussion locks. The percussion hammer has cast-in engraving with a 1.8" throw. The lock plate is 4.5" l       LOCK-LR-100-M . . . $160.00

Tumbler , wax cast steel, tempered, tapped 6-40 Tumbler, wax cast steel, tempered, tapped 6-40. Fly pocket is now on the outside face of the tumbler. Early versions of this tumbler have a smaller bridle axle. If the bridle axle is considerably smaller than 0.155" diameter then you have the early version. L&R recommends you should also replace the bridle, or enlarge the existing bridle with a #21       LOCK-LR-1100-TU . . . $34.50

S. Hawken , right hand, percussion lock, notched for breechplug, by L&R We offer our Thomas Gibbons style S. Hawken cap lock pre-notched for our #Plug-LR-16-3 breech plug and tang. On receipt of this lock, plug, and tang, you will notice that the notch is about .010” too shallow at the bottom, not bad for an “as cast” fit. Two or three swipes with the rounded side of a fine cut file will provide the needed clearance at       LOCK-LR-125 . . . $160.00

The WARRANTED right Percussion Lock, by L&R The WARRANTED right Percussion Lock After about 1840, factory produced locks became widely available. Sometimes marked with the maker's name, often marked “Warranted", these slim percussion locks became popular on Ohio and plains rifles. Our plug and tang is made to fit a 1" octagon barrel with 3/4-16 threads. Our “Warranted" style right lock is       LOCK-LR-150 . . . $160.00

English Durs Egg - London right Percussion Conversion Lock, by L&R Durs Egg - London right Percussion Conversion Lock Best quality London made flint locks were often converted to percussion, during the 1825 - 1840 transition period. This nice percussion lock has the plate style of an earlier flint lock, with a notch for a 7/16" powder drum and nipple. A fly detent prevents the sear from snagging the half-cock n       LOCK-LR-1500 . . . $160.00

John Bailes , right hand flint lock, by L&R Sometimes called a small Manton, baby Durs Egg, or small English flint lock. This smaller lock is a fine London design, in the style of John Bailes, gunmaker. Correctly used on English pistols, rifles and dainty fowlers of the 1770-1810 period. After about 1780 this improved style of lock is found on American guns, having been smuggled here from En       LOCK-LR-1700 . . . $229.00

L&R's Ohio Rifle - Warranted Lock , After about 1840, factory produced locks became widely available. Sometimes marked with the maker’s name, often marked “warranted” to assure confidence, these slim percussion locks became popular on Ohio rifles and Plains rifles. This Ohio Rifle style Warranted cap lock is fitted with a fly detent for use with set triggers, and a swivel link with       LOCK-LR-175 . . . $160.00

John Bailes left hand, flint lock, by L&R Sometimes called a small Manton, baby Durs Egg, or small English flint lock. This smaller lock is a fine London design, in the style of John Bailes, gunmaker. Correctly used on English pistols, rifles and dainty fowlers of the 1770-1810 period. After about 1780 this improved style of lock is found on American guns, having been smuggled here from En       LOCK-LR-1800 . . . $229.00

S. Hawken left hand, percussion lock, by L&R Sam Hawken and other makers used these locks on Plains rifles, Ohio rifles and late longrifles, during the later percussion era of 1845 to 1885. Thomas Gibbons of St. Louis made and signed many locks. Note the square inside corner at the front of the lock plate, and the normal narrow percussion hammer, both late features. Fitted with a fly detent f       LOCK-LR-200 . . . $160.00

Classic conversion , right hand, percussion lock, by L&R L&R's new Classic cap lock is a true conversion. The pan is still evident on the lock plate. The pan molding and flash fence have been retained, and the pan groove has been enlarged to accept a 1/2" diameter powder drum and nipple. L&R's new conversion lock is made to be a tight fit in the Siler lock mortise, and is a tiny bit larger, with a longer       LOCK-LR-2200 . . . $160.00

Mule Ear or Sideslapper right hand, percussion lock, by L&R The L&R Mule Ear or Sideslapper percussion lock design allows the percussion nipple to be mounted directly into the barrel. Pull the hammer outboard to cock the lock. Unlike some mule ear locks this lock has both a half cock and full cock position on the tumbler. The lock plate is 5.1" long by 0.94" tall. The tumbler is fitted with a fly detent to       LOCK-LR-2500 . . . $160.00

English Durs Egg - London left Flint Lock, by L&R Durs Egg - London left Flint Lock Perhaps London’s most innovative lock and gun maker, Mr. Durs Egg immigrated from Switzerland, setting up shop in London, the world’s arms making center in his time. Actually, “Durs” was a nickname, but Mr. Egg adopted it as his own. We are glad he did. Once you have used this lock, you will never confuse the “D       LOCK-LR-3100 . . . $229.00

cock, left, wax cast steel, 1.4" throw, tapped 1/4-28 cock, left, wax cast steel, 1.4" throw, tapped 1/4-28 A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, which great       LOCK-LR-3100-CO . . . $25.50

frizzen, left, wax cast steel, as cast, temper after fitting frizzen, left, wax cast steel, as cast, temper after fitting A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, whic       LOCK-LR-3100-FR . . . $36.00

has been added to your .

---