Taps , high carbon steel, 8-32 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 10-32 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 10-36 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 12-24 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 12-28 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Tap , 10-32 thread, high carbon steel, taper tap, to start a through hole Tap, high carbon steel, 10-28 thread, tapered tap for easiest threading of a through hole, with seven to eight threads chamfered. Tap Drill: for 10-28 thread, use No. Drill-21 Clearance Drill: for 10-28 thread, use fractional Drill-13/64 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the       TAP-10-28-T . . . $16.99

Tap , 10-32 thread, high carbon steel, bottom tap, to finish a blind hole Tap, high carbon steel, 10-32 thread, bottom tap to finish a blind hole, with one thread chamfered. Tap Drill: for 10-32 thread, use No. Drill-21 Clearance Drill: for 10-32 thread, use fractional Drill-13/64 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially wh       TAP-10-32-B . . . $3.99

Tap , 10-32 thread, high carbon steel, plug tap, to start a blind or through hole Tap, high carbon steel, 10-32 thread, plug tap for general threading, or to start a blind hole, with three to five threads chamfered. Tap Drill: for 10-32 thread, use No. Drill-21 Clearance Drill: for 10-32 thread, use fractional Drill-13/64 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from       TAP-10-32-P . . . $3.99

Tap , 10-32 thread, high carbon steel, taper tap, to start a through hole Tap, high carbon steel, 10-32 thread, tapered tap for easiest threading of a through hole, with seven to eight threads chamfered. Tap Drill: for 10-32 thread, use No. Drill-21 Clearance Drill: for 10-32 thread, use fractional Drill-13/64 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the       TAP-10-32-T . . . $3.99

Tap , high carbon steel, 10-36 thread, plug tap, to start a blind or through hole Tap, high carbon steel, 10-36 SPECIAL thread, plug tap with three to five threads chamfered. This special non-standard thread size is often needed to thread tangs for sight screws, to accept Axtell tang sights, exactly as used on the original rifles. Tap Drill: for 10-36 thread, use No. Drill-21 Clearance Drill: for 10-36 thread, use fractional       TAP-10-36-P . . . $19.99

Tap , high carbon steel, 12-24 thread, bottom tap Tap, high carbon steel, 12-24 thread, bottom tap. Tap Drill: for 12-24 thread, use No. Drill-16 Clearance Drill: for 12-24 thread, use fractional Drill-7/32" We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is       TAP-12-24-B . . . $3.99

Tap , high carbon steel, 12-24 thread, plug tap Tap, high carbon steel, 12-24 thread, plug tap. Tap Drill: for 12-24 thread, use No. Drill-16 Clearance Drill: for 12-24 thread, use fractional Drill-7/32" We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a       TAP-12-24-P . . . $3.99

Tap , high carbon steel, 12-24 thread, taper tap Tap, high carbon steel, 12-24 thread, taper tap. Tap Drill: for 12-24 thread, use No. Drill-16 Clearance Drill: for 12-24 thread, use fractional Drill-7/32" We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a       TAP-12-24-T . . . $3.99

Tap , high carbon steel, 12-28 thread, taper tap Tap, high carbon steel, 12-28 thread, taper tap. Tap Drill: for 12-28 thread, use No. Drill-14 Clearance Drill: for 12-28 thread, use fractional Drill-7/32" We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a       TAP-12-28-T . . . $5.99

Tap , 10-32 thread, high carbon steel, bottom tap, to finish a blind hole Tap , high carbon steel, 1/4-20 thread, bottom tap Tap, high carbon steel, 1/4-20 thread, bottom tap. Track's 1/4-20 taps are used for top jaw screws. The recommended tap drill for this size tap is our Drill-7, see below. The recommended clearance drill is our Drill-F, see below. Not sure what type of tap you need? Click on the "definitions" tab above. Gunsmithing tip: We prefer high carbon st       TAP-1/4-20-B . . . $4.99

Tap , high carbon steel, 1/4-20 thread, plug tap Tap, high carbon steel, 1/4-20 thread, plug tap. Track's 1/4-20 taps are used for top jaw screws. The correct tap drill for this size tap is our Drill-7, see below. The correct clearance drill is our Drill-F, see below. Not sure type of tap you need? Click on the "definitions" tab above. Gunsmithing tip: We prefer high carbon steel taps for g       TAP-1/4-20-P . . . $4.99

Tap , high carbon steel, 1/4-20 thread, taper tap Tap, high carbon steel, 1/4-20 thread, taper tap. Track's 1/4-20 taps are used for top jaw screws. The correct tap drill for this size tap is our Drill-7, see below. The correct clearance drill is our Drill-F, see below. Not sure type of tap you need? Click on the "definitions" tab above. Gunsmithing tip: We prefer high carbon steel taps for g       TAP-1/4-20-T . . . $4.99

Tap , high carbon steel, 1/4-28 thread, bottom tap Tap, high carbon steel, 1/4-28 thread, bottom tap. Track's 1/4-28 taps are our most popular nipple thread size and are also used for top jaw screws. The correct tap drill for this size tap is our Drill-3, see below. The correct clearance drill is our Drill-F, see below. Not sure type of tap you need? Click on the "definitions" tab above. Guns       TAP-1/4-28-B . . . $3.99

Tap , high carbon steel, 1/4-28 thread, plug tap Tap, high carbon steel, 1/4-28 thread, plug tap. Track's 1/4-28 taps are our most popular nipple thread size and are also used for top jaw screws. The correct tap drill for this size tap is our Drill-3, see below. The correct clearance drill is our Drill-F, see below. Not sure type of tap you need? Click on the "definitions" tab above. Gunsmi       TAP-1/4-28-P . . . $3.99

Tap , high carbon steel, 1/4-28 thread, taper tap Tap, high carbon steel, 1/4-28 thread, taper tap. Track's 1/4-28 taps are our most popular nipple thread size and are also used for top jaw screws. The correct tap drill for this size tap is our Drill-3, see below. The correct clearance drill is our Drill-F, see below. Not sure type of tap you need? Click on the "definitions" tab above. Gunsmi       TAP-1/4-28-T . . . $3.99

Tap , high carbon steel, 1/4-32 thread, plug tap Use 7/32" tap drill. Tap , high carbon steel, 1/4-32 thread, plug tap Tap Drill : for 1/4-32 thread, use fractional Drill-7/32 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed"       TAP-1/4-32-P . . . $21.99

Tap , high carbon steel, 1/4-32 thread, taper tap Use 7/32" tap drill. Tap , high carbon steel, 1/4-32 thread, taper tap Tap Drill : for 1/4-32 thread, use fractional Drill-7/32 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially when tapping blind holes. High Speed Steel (HSS) is a special alloy made to retain an edge at "high speed       TAP-1/4-32-T . . . $19.99 Closeout

Taps , high carbon steel, 1/4-20 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 1/4-32 thread This special thread is used almost exclusively for the 1/4-32 White Lightnin' touch hole liners, where fine threads allow a larger inside cavity. It is also used to refresh the threads of older Numrich Arms underhammer rifles, and Hopkins & Allen percussion longrifles. Our special nipples with long shanks for underhammer rifles are also threaded 1/

Taps , high carbon steel, 5/16-18 thread Never use high speed steel (HSS) taps for gunsmithing. High speed steel is perfect for a drill bit, but a poor choice for a gunsmith's tap. If broken, it is difficult to remove. Our high carbon steel taps are hard and sharp. If broken they are easily removed with a drift punch. Taper taps have eight to ten threads chamfered to start and cut thread

has been added to your .

---