Primitive Rifleman's Powder Horn , real cow horn, hand polished, turned wooden butt plug and stopper, carved neck, over 11" arc length, with a worn antiqued patina finish This correct powder horn is over 11" arc length, with a carved neck and worn patina finish. Hand made from real cow horn, no two are exactly alike. The turned wooden butt plug has a knob for attaching your shoulder strap, and is secured by small domed brass nails. A turned wooden stopper is fitted to the spout, and included. Hand made, add your own       HORN-D . . . $22.50

Powder Horn Staple, Large , 7/8" wide hand forged iron, with decorative twist Our large powder horn staples are hand forged iron from 1/16" square stock. Measuring 7/8" wide, with 7/8" long feet. shaped with a decorative twist in the center. Pre-drill the holes using a 1/16" or smaller drill bit. Buy one, or a pair of our hand forged staples for the strap of your next hand made powder horn. We strongly recommend our Recreat       HORN-STAPLE-L . . . $2.99

Powder Horn Staple, Small , 5/8" wide hand forged iron, with decorative twist Our small powder horn staples are hand forged iron from 1/16" square stock. Measuring 5/8" wide, with 5/8" long feet. shaped with a decorative twist in the center. Pre-drill the holes using a 1/16" or smaller drill bit. Buy one, or a pair of our hand forged staples for the strap of your next hand made powder horn. We strongly recommend our Recreat       HORN-STAPLE-S . . . $2.99

Powder Horn , large, over 11" long, white, polished Creamy white cow horns have always been prized as powder horns. This large powder horn is 11 to 14" long, with a classic carved neck. Notice the hand cut facets of the neck, at the transition from from the white body to the dark neck. A deep groove for the leather strap adjoins a raised square ring, followed by three concave rings, and a polished t       HORN-W-L . . . $84.50

Bone Tipped & Banded Horns Regional Characteristics of Professionally Made Powder Horns Vol. 1 , by Jay Hopkins Throughout the 18th and first half of the 19th century, all firearms required a portable container for gun powder. In America, the preferred material was cow horn which was readily available, inexpensive and water resistant. It had another important quality; when properly heated it was moldable. It could be flattened and used to make combs, spoons       BOOK-BT-BH . . . $99.00

Bone Tipped & Banded Horns Regional Characteristics of Professionally Made Powder Horns Vol. 2 , by Jay Hopkins Throughout the 18th and first half of the 19th century, all firearms required a portable container for gun powder. In America, the preferred material was cow horn which was readily available, inexpensive and water resistant. It had another important quality; when properly heated it was moldable. It could be flattened and used to make combs, spoons       BOOK-BT-BH-V2 . . . $99.00

More How-to's for the Black Powder Cartridge Rifle Shooter by Paul Matthews Contains fine points not covered in Matthews' other black powder books, such as minute of angle, flash hole size, and controlling recoil. Soft cover, 6 x 9" format of 160 pages. The Table of Contents includes the following : Acknowledgments Foreword Chapter 1 It's a Head Game Chapter 2 What is a Minute of Angle? Chapter 3 Practice with the Bl       BOOK-M-HBPCRS . . . $22.50

Powder Horns, Documents of History , by Tom Grinslade Author Tom Grinslade has gathered over 180 fine 17th, 18th and 19th century powder horns, most of which have never been published, for this fresh look at powder horns as "documents of history." Includes more than 430 full color photographs and Grinslade's concise background text bring the artwork of the horns and their historic context into focus.       BOOK-PH . . . $39.00

Shooting the Black Powder Rifle Cartridge , by Paul Matthews This volume compliments Loading the Black Powder Rifle Cartridge. Specific information for shooters to gain more understanding on the operation and approach to accurate and reliable use of these rifles. Soft bound volume of 122 pages. The Table of Contents includes the following : Acknowledgments Foreword Chapter 1 The Black Powder Cartridge Ri       BOOK-SBPCR . . . $22.50

Brass Funnel, 10-1mm thread, for filling large powder flasks Polished brass, with a rolled rim on the outer edge, this small funnel is threaded 10-1mm to fit our powder flasks, powder horn valves, and some powder horns. The brass funnel is 1-1/2" in diameter. Overall length is 2".       FUNNEL-FL . . . $14.29

LEE Pro-Autodisk Powder Measure , Elastomer wiper and teflon coated metal casting make this the smoothest operating measure. Will not cut powder and almost totally eliminates leakage. Large hopper with shut-off valve is attached with brass thumb nuts for the ultimate in disk changing convenience. Increased safety with positive pull-back lever. Includes swivel adapter and spring ret       LEE-90429 . . . $54.99

LEE Neck Expander Die, 7/8-14 thread, for our neck expander plugs or powder compression plugs, each sold separately Neck expander die, by Lee, 7/8x14 thread. Neck expander plug separately. Order one of the popular sizes of neck expander plugs or powder compression plugs shown below for use with this die. The die comes with a factory powder through plug installed. This plug will need to be removed before installing a neck expander plug, or powder compression plug       LEE-DIE-45-EX . . . $15.29

Ox Yoke® Black Powder Bullet Lube, one 1-1/4 oz. stick Black Powder bullet lube by Ox-Yoke was formulated specifically for black powder and smokless powder shooter. Its high melting temperature makes it ideal for long range match shooting. It keeps fouling soft for continuous shooting and flows through luber-sizers for effortless bullet lubing. It can be applied by hand to muzzle loading bullets. Sold       OX-LUBE-STICK . . . $4.19

Flint Priming Valve , dispenses about 1 grain weight of FFFFg priming powder, fits 7/32" hole, solid brass This tiny brass priming valve has a knurled body, which may be glued to your wood, horn, or antler priming flask. Drill deep enough to hold a quantity of priming powder. The valve spout unscrews, to allow refilling through the brass body using a funnel. Use FFFFg black powder, for priming only. Best quality, made in the USA, this tiny valve squirts       PV-1 . . . $10.99

Speed Loader , for shotgun, pack of 4 tubes, magnum load holds 3-3/4 drams (100 grains) of FFg black powder, and 1-1/4 ounce of shot, ideal for up to 10 gauge guns Shotgun Speed Loaders: Use with any gauge shotgun, fusil or smoothbore fowling gun. Our shotgun speed loaders have two compartments to hold powder and shot, and caps on both ends. Available in two sizes: Magnum Load shotgun speed loader holds 3-3/4 drams (100 grains) of FFg black powder, and 1-1/4 ounce of shot, ideal for 10 gauge guns. You don't n       SPEED-SG-ML . . . $9.99

Buffalo Powder Horn , 13-3/4" with low domed base, hand made, by Scott & Cathy Sibley This beautiful hand made Buffalo powder horn measures 13-3/4" long, as measured around the outer curve from the tip to the base. The base is angle drilled with two holes for leather strap. The neck is shaped with two large steps, either could be used to secure a strap. The body of the buffalo horn is a satin black in color. Buffalo horn differs fro       AAV-881 . . . $320.00

Eastern Buffalo Powder Horn , 13-3/4" low domed base with staple, red linen strap, hand made, by Scott & Cathy Sibley This beautiful hand made Buffalo powder horn measures 13-3/4" long, as measured around the outer curve from the tip to the base. The neck is made of turned horn. A red stained hand carved wooden stopper is fitted. The body of the buffalo horn is a satin black in color. Buffalo horn differs from cow horn and the smooth hand scraped finish displays s       AAV-883 . . . $320.00

Reloading Tools of the Black Powder Era 1850-1910, Volume 1 by Tom Rowe & Ed Curtis There has been a need for a through study of the various loading tools of the black powder and early smokeless powders era for rifles, shotgun tools will not be covered. While a book on the subject can never be complete, and odd and unusual examples will continually appear, this book will cover most of what a collector will encounter. The leading e       BOOK-RT-V1 . . . $79.00

Reloading Tools of the Black Powder Era 1850-1910, Volume 2 by Tom Rowe & Ed Curtis There has been a need for a through study of the various loading tools of the black powder and early smokeless powders era for rifles, shotgun tools will not be covered. While a book on the subject can never be complete, and odd and unusual examples will continually appear, this book will cover most of what a collector will encounter. The leading e       BOOK-RT-V2 . . . $79.00

Track's best Black Powder BORE CLEAN Solvent , with flip-top spout Track's best Bore Clean Solvent is not acidic, not alkaline. Developed by professional chemists, our formula is a neutral blend of surfactants, chelating agents, sequestering agents and suspending agents. This is simple chemistry: matching the right mix of cleaning agents to the task of removing bore fowling, not magic. Surfactants are “wetting ag       BORE-CLEAN . . . $4.59

Track's best Black Powder BORE CLEAN Solvent , case of 25 Track's best Bore Clean Solvent , case of 25 bottles. Track's best Bore Clean Solvent is not acidic, not alkaline. Developed by professional chemists, our formula is a neutral blend of surfactants, chelating agents, sequestering agents and suspending agents. This is simple chemistry: matching the right mix of cleaning agents to the task of removi       BORE-CLEAN-X . . . $97.99

Powder drum clean-out screw , 10-32 thread, slotted, domed head powder drum clean-out screw , 10-32 thread, slotted, domed head. Used on powder drums fitted with clean-out screws at center of outboard end.       DRUM-SCREW . . . $1.99

Powder Horn , large, 11 to 14", with antique patina finish Patina finished to resemble an original antique, this large powder horn is 11 to 14" long, with a classic carved neck. Notice the hand cut facets of the neck, at the transition from from the white body to the dark neck. A deep groove for the leather strap adjoins a raised square ring, followed by three concave rings, and a polished tapered spout. T       HORN-A-L . . . $74.50

Flat Powder Horn Kit , large, polished, unfinished, includes; horn, base, stopper, strap, staple, nails, and instructions, ready to assemble This horn kit includes a real cow horn which has been cleaned and polished. Horns will be in the 7-1/2 to 9" range measured around the outside curve, color will vary, We recommend polishing this horn with lengthwise strokes, using 0000 steel wool or very fine sandpaper, to dull it. The wood base plug requires additional hand fitting vs. a turned ba       HORN-KIT-FLAT-L . . . $49.00

Powder Horn Kit , medium, polished, unfinished, includes; horn, base, stopper, strap, nails, and instructions, ready to assemble This horn kit includes a real cow horn which has been cleaned and polished. Horns will be in the 9 to 11" range measured around the outside curve, color will vary, We recommend polishing this horn with lengthwise strokes, using 0000 steel wool or very fine sandpaper, to dull it. The turned wood base plug is turned to an approximate fit and will req       HORN-KIT-M . . . $39.00

has been added to your .

---