Early Hawken Rifle Buttplate , wax cast brass Overall length 4-7/8", width 1-7/16", comb 3-1/8" Our widest Hawken style buttplate, for large bore halfstock rifles. Styled like our classic late Hawken buttplate, but made wider to lessen recoil. Often used on fullstock Hawken flint or percussion rifles, which have our flat grip-rail triggerguard and sometimes carry a distinctive oval iron patchbox with "pineapple" finial. Available in wax cast       BP-HAWK-E-B . . . $42.99

Early Hawken Rifle Buttplate , wax cast steel Overall length 4-7/8", width 1-7/16", comb 3-1/8" Our widest Hawken style buttplate, for large bore halfstock rifles. This slender casting is styled like our classic late Hawken buttplate, but made wider to lessen recoil. The comb gently tapers upward when viewed from the side, and narrows from the heel to toe when viewed from above. Often used on fullstock Hawken flint or percussion rifles, which       BP-HAWK-E-I . . . $32.99

Early Bethlehem Buttplate , sand cast brass Overall length 5-1/4", width 1-3/4", comb 2-3/4" A early Bethlehem school buttplate. These longrifles often used side-opening patchboxes. Available in sand cast brass or nickel silver. Overall length 5-1/4", width 1-3/4", comb 2-3/4".       BP-K-3-B . . . $20.99

Lancaster Style Buttplate , wax cast brass Overall length 5", width 1-7/8", comb 2-9/16" Pre-Revolutionary War, Lancaster County. Use this on a Jacob Dickert style rifle. Our patchbox #PB-KIT-9, would be an excellent choice to accompany this buttplate. Available in wax cast brass or steel. Overall length 5", width 1-7/8", comb 2-9/16".       BP-LANC-2-B . . . $42.99

Lancaster Style Buttplate , wax cast steel Overall length 5", width 1-7/8", comb 2-9/16" Pre-Revolutionary War, Lancaster County. Use this on a Jacob Dickert style rifle. Our patchbox #PB-KIT-9, would be an excellent choice to accompany this buttplate. Available in wax cast brass or steel. Overall length 5", width 1-7/8", comb 2-9/16".       BP-LANC-2-I . . . $32.99

Lancaster County Style Buttplate , sand cast brass Overall length 4-1/4", width 1-1/2", comb 2-1/2" A Lancaster County buttplate, notched for patchbox lid. Copied after an original by Henry Albright. Sand cast, yellow brass only. Overall length 4-1/4", width 1-1/2", comb 2-1/2".       BP-MA-56-B . . . $20.99

York County Style Buttplate , sand cast brass Overall length 4-1/4", width 1-11/16", comb 2-3/4" York County style, with raised lip to protect patchbox lid, from a longrifle by George Eister. Sand cast, yellow brass only. Overall length 4-1/4", width 1-11/16", comb 2-3/4".       BP-MA-68-B . . . $20.99

Reading School Buttplate , circa 1790, wax cast brass Overall length 5-1/8", width 1-5/8", comb 2-1/2" From the Reading School. Copied from a John Bonewitz rilfe, circa 1790 . Matching patchbox available from the same rifle, shown in Kentucky Rifles & Pistols 1750 -1850 . Available in wax cast brass or steel. Overall length 5-1/8", width 1-5/8", comb 2-1/2".       BP-READ-1-B . . . $42.99

Reading School Buttplate , circa 1790, wax cast steel Overall length 5-1/8", width 1-5/8", comb 2-1/2" From the Reading School. Copied from a John Bonewitz rilfe, circa 1790 . Matching patchbox available from the same rifle, shown in Kentucky Rifles & Pistols 1750 -1850 . Available in wax cast brass or steel. Overall length 5-1/8", width 1-5/8", comb 2-1/2".       BP-READ-1-I . . . $32.99

Tennessee Bean Style Buttplate , wax cast steel Overall length 4-1/2", width 1-1/4", comb 3-3/8" A lighter more graceful Tennessee longrifle style buttplate, sometimes called the Bean buttplate, in honor of one of Tennessee's most famous makers. Made in iron only, this wax casting may be bent cold to reduce the amount of curvature a small amount. We recommend using this on a fancy maple fullstock, with a round end banana patchbox. Be sure to o       BP-TN-2-I . . . $34.99

A. Verner Style Buttplate , wax cast brass Overall length 5-1/8", width 1-5/8", comb 2-1/8" This long buttplate with a slight curve and distinct octagon flats at the top, is used on our A. Verner longrifle stock. Sometimes called the “Buck’s County” school of style, others call this the “Allentown-Bethlehem” style. Wax cast brass, this buttplate requires minor polishing and deburring before installation. Typically, a rifle fitted with thi       BP-VERNER-1-B . . . $55.00

Colonial American Flint lock , two exposed screw version, by R. E. Davis This large Colonial flint lock is ideal for an American longrifle or fowling gun, of the 1750-1770 era, with it’s large size and pointed tail. Assembled, tuned, and signed by R. E. Davis. Use is on an early longrifle, .50 to .62 caliber, with a simple brass or sliding wooden patchbox. Such “French & Indian War” era rifles are shown in Rifles of Col       LOCK-COLONIAL-F . . . $225.00

Colonial American Flint lock , one exposed screw version, by R. E. Davis This large Colonial flint lock is ideal for an American longrifle or fowling gun, of the 1750-1770 era, with it’s large size and pointed tail. Assembled, tuned, and signed by R. E. Davis. Use is on an early longrifle, .50 to .62 caliber, with a simple brass or sliding wooden patchbox. Such “French & Indian War” era rifles are shown in Rifles of Col       LOCK-COLONIAL-F-1 . . . $225.00

Germanic Jaeger Rifle Flint Lock, by R. E. Davis Co. This nice large flint lock is distinctly “Germanic” style for use on transitional American longrifles of the 1750-1760 era. This lock is made for Track, by the R. E. Davis Company. Intended for use on “transitional” longrifles, so-called because they fit midway between the early short barreled “Jaeger” hunting rifles, and the classic longrifles we       LOCK-JAEGER . . . $225.00

L&R's RPL-04-C Percussion Lock to upgrade Dixie Gun Works Tennessee Rifle , right hand only, made in the USA, by L&R Lock Company This new percussion lock will replace the Dixie Tennessee Mountain rifle lock. A new lock bolt is included. This percussion longrifle is nearly always stocked in cherry, trimmed in iron, marked "JAPAN" on the barrel, made by Miroku, Japan, for Dixie Gun Works. It nearly always has double set triggers, and often has a grease hole bored in the buttst       LOCK-LR-04-C . . . $215.00

L&R's RPL-04-F Flint Lock to upgrade Dixie Gun Works Tennessee Rifle , right hand only, made in the USA, by L&R Lock Company This new flint lock will replace the Dixie Tennessee Mountain rifle fint lock. A new lock bolt is included. This flint longrifle is nearly always stocked in cherry, trimmed in iron, marked "JAPAN" on the barrel, made by Miroku, Japan, for Dixie Gun Works. It nearly always has double set triggers, and often has a grease hole bored in the buttstock i       LOCK-LR-04-F . . . $270.00

Vincent Rifle Capbox Kit , brass, about 6" overall length This capbox is a copy of one on an Ohio rifle by John Vincent & Son. It was stocked in curly maple, trimmed in brass. Vincent rifles frequently mixed brass and German silver trim on their rifles. This nicely made patchbox has an overall length of about 6". Vincent used nine steel screws on the original capbox. Includes nine steel screws.       PB-KIT-13-B . . . $26.99

H. E. Leman Capbox Kit , wax cast steel, 3-3/4" overall length Sometimes called the wilted lilly capbox , this design we originally used on H. E. Leman Plains rifles, Indian Trade rifles, and was sometimes engraved on his finer longrifles. All originals in this shape, that we have seen, were brass, but iron capboxes of many designs were used on antique rifles of this period. Wax cast of malleable steel, the li       PB-LEMAN-I . . . $29.99

Wood screw, flat head #6 x 1/2", steel Un-plated #6 x 1/2" flat head wood screw, for patchbox or toeplate.       SCREW-6X12 . . . $0.20

Wood screw, oval head #6 x 1/2", steel Un-plated #6 x 1/2" oval head wood screw, for patchbox or toeplate.       SCREW-6X12-O . . . $0.20

Wood screw, flat head #8 x 5/8", steel Un-plated #8 x 5/8" flat head wood screw, for guards or patchboxes.       SCREW-8X58 . . . $0.20

Screws & pins , complete set for U. S. Model 1803 Harper's Ferry Rifle , unplated steel Our complete set of screws & pins for the U. S. Model 1803 Harper's Ferry Rifle are made of unplated steel, with slotted heads. These are becoming scarce. Our set includes: 2 #BOLT-L-1803 lock bolt, 8-32, 3/8" head, for mounting the lock, plus 1 #BOLT-T-8-OL tang bolt, 8-32, countersink oval head, plus 2 #SCREW-10x1V wood screws, #10 x 1", for mo       SCREW-SET-1803 . . . $16.67

Classic Tennessee , pre shaped, non-inlet stock, 13/16" octagon, 42" barrel This classic Tennessee fullstock is made without lock or trigger mortise, so you may hand inlet your favorite lock and trigger. Pre-inlet for any light weight 13/16” straight octagon 42” barrel, and drilled full depth for a 3/8” ramrod hole, it has a straight comb. Trigger reach may be adjusted up to 15”, with 4-1/2” drop. Butt end is 5 x 1-1/2”, n

Stock, Classic Tennessee , pre shaped, non-inlet 13/16" octagon, 42" barrel, plain maple This classic Tennessee fullstock is made without lock or trigger mortise, so you may hand inlet your favorite lock and trigger. Pre-inlet for any light weight 13/16” straight octagon 42” barrel, and drilled full depth for a 3/8” ramrod hole, it has a straight comb. Trigger reach may be adjusted up to 15”, with 4-1/2” drop. Butt end is 5 x 1-1/2”, n       STK-CT-13-M1 . . . $179.00

Stock, Classic Tennessee , pre shaped, non-inlet , 13/16" octagon, 42" barrel, semi-fancy maple This classic Tennessee fullstock is made without lock or trigger mortise, so you may hand inlet your favorite lock and trigger. Pre-inlet for any light weight 13/16” straight octagon 42” barrel, and drilled full depth for a 3/8” ramrod hole, it has a straight comb. Trigger reach may be adjusted up to 15”, with 4-1/2” drop. Butt end is 5 x 1-1/2”, n       STK-CT-13-M2 . . . $199.00

has been added to your .

---