Your search for 'hammers'
returned
141 results.
|
English Alex Henry right Percussion Bar Lock, by R.E. Davis
This new bar lock is patterned after one by Alexander Henry, a famous London maker of Sporting rifles for English gentlemen. The sear rides on a pin axle. Features include an elegant three screw bridle, stirrup linked mainspring, and fly detent for set triggers such as our fancy LePage single set trigger. Notice the extra “bar” shown above the plat
|
|
Percussion Lock, Rifle, Ohio - Goulcher , by R. E. Davis
Goulcher Percussion Lock The Goulcher family made thousands of locks. They are found on plains rifles, late longrifles, pistols and shotguns of the 1840 to 1880 era. This Goulcher lock is pre-inlet in our Vincent rifle stock. Cut for a 1/2” powder drum. The lock has an engraved hammer with 1.65” throw, for barrels from 13/16" to 1” octagon.
|
|
Ketland late conversion cap lock, by R. E. Davis
Build an early percussion longrifle, or converted flint Tennessee or late longrifle using our late Ketland cap lock. This “conversion" lock interchanges with our late Ketland flint lock. If you are planning a gun with interchangeable ignition, we recommend fitting the percussion lock first, to insure a good fit of the drum to the lock plate. The pl
|
|
John Bailes - London, right Percussion Conversion Lock, by L&R
John Bailes - London, right Percussion Conversion Lock Fine original flint locks were converted to percussion, during the 1825 to 1880 period. The flash hole was replaced with a powder drum and nipple, which we offer separately. Old time gunsmiths cut away the pan, discarded the frizzen, frizzen spring, and cock. A new hammer was added, and scre
|
|
John Bailes - London left Percussion Conversion Lock, by L&R
John Bailes - London left Percussion Conversion Lock This left hand John Bailes cap lock exactly matches our right hand John Bailes cap lock. Each can be made to interchange with our right and left hand John Bailes flint locks. Fine original flint locks were converted to percussion, during the 1825 to 1880 period. The flash hole was replaced wit
|
|
Classic conversion , right hand, percussion lock, by L&R
L&R's new Classic cap lock is a true conversion. The pan is still evident on the lock plate. The pan molding and flash fence have been retained, and the pan groove has been enlarged to accept a 1/2" diameter powder drum and nipple. L&R's new conversion lock is made to be a tight fit in the Siler lock mortise, and is a tiny bit larger, with a longer
|
|
Mule Ear or Sideslapper right hand, percussion lock, by L&R
The L&R Mule Ear or Sideslapper percussion lock design allows the percussion nipple to be mounted directly into the barrel. Pull the hammer outboard to cock the lock. Unlike some mule ear locks this lock has both a half cock and full cock position on the tumbler. The lock plate is 5.1" long by 0.94" tall. The tumbler is fitted with a fly detent to
|
|
Lock, percussion, H.E. Leman Trade Rifle , right hand, by L&R
H. E. Leman, Henry Derringer, and many other Pennsylvania & Ohio rifle makers used this style lock on “trade rifles" sold by merchants and traders to westbound emigrants. Correct for late longrifles and Indian trade rifles of the 1840 to 1880 era. Locks used by Henry Leman's factory often have a distinctive flat tail at the rear of the lock. We lea
|
|
lock, percussion, H.E. Leman Trade Rifle , left hand, by L&R
H. E. Leman, Henry Derringer, and many other Pennsylvania & Ohio rifle makers used this style lock on “trade rifles” sold by merchants and traders to westbound emigrants. Correct for late longrifles and Indian trade rifles of the 1840 to 1880 era. Locks used by Henry Leman’s factory often have a distinctive flat tail at the rear of the lock. We lea
|
|
Bedford County right hand, percussion lock, by L&R
Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l
|
|
Sharon Hawken new internal lock parts, by L&R
The Sharon Rifle Barrel Co., Kalispell, Montana, made a popular Hawken rifle kit, which uses a L&R lock that appears identical to our #LOCK-LR-100. The plate, hammer, bridle, sear spring, and all screws are the same. However, internal parts of old locks are different! DANGER: Sharon kits have L&R locks with old style tumbler, sear, link, pin, main
|
|
Blickensdorfer Schuetzen , right hand, percussion lock, by R.E. Davis
The late percussion lock features Hawken style internal parts, with a fly detent to allow double set triggers, virtually a requirement for a Schuetzen target rifle. The hammer is made to reach the nipple on our big 1" or 1-1/8" octagon or larger breech plug. This lock is shown at exact-full-size , in Track's new catalog for gunmakers and gunsmit
|
|
Siler small right Percussion Lock Kit, unassembled
Siler small right Percussion Conversion Lock Kit Sometimes called Siler’s pistol lock, this medium sized percussion lock kit is ideal for light rifles with 13/16", 7/8" or 15/16" octagon barrels. Similar in shape to Siler’s large lock kit, they are often confused. Made in right hand only, an identical small flint lock kit may be assembled to int
|
|
Siler small right Percussion Conversion Lock, by Jim Chambers
Siler small right Percussion Conversion Lock Sometimes called Siler’s pistol lock, this medium sized percussion lock is ideal for light rifles with 13/16", 7/8" or 15/16" octagon barrels. Similar in shape to Siler’s large lock, they are often confused. Made in right hand only, an identical small flint lock may be ordered to interchange with it.
|
|
Lyman Pick & Brush Set , four plastic double ended picks, nylon brush, and brass brush
Lyman's Pick and Brush Set allows you to clean all those hard to reach grooves and corners that can't be reached with patches. The plastic picks come in a variety of shapes and so that you'll have the just the right size to fit into those tight spots. A nylon brush and stiffer brass brush are included to remove stubborn powder residue, including in
|
|
Cleaning Rod for .44 Army Revolver , 3/8" hickory, 12" long, brass tips, 10-32 thread, turned hardwood knob handle with 8-32 thread.
Cleaning Rod for .44 Colt Army, Walker, Dragoon, Remington, .45 Ruger Old Army , Sanded and ready to stain, this 3/8" hickory rod is 12" long, with a brass tip threaded 10-32 for your cleaning accessories. Carry it to the range, camp, or display it in a cased set. The turned wooden knob handle is threaded 8-32 and may be removed to accept 8-32 acc
|