Triggerguard, French Type 'D' Trade Fusil , wax cast steel Used on French Type 'D' trade fusils from 1730 until 1763, this triggerguard is unusual. Its finial was not made to match the Type 'D' buttplate's finial. Mount triggerguard with three pins, or two pins and one screw. Overall length is 10-7/16", inside trigger bow is 2-1/8" long, and 1-3/16" deep.       TG-FUSIL-D-I . . . $35.99

Trigger Only , French Type 'D' Trade Fusil, wax cast steel This trigger looks almost modern. The French were leaders in arms design. The Type D fusil was a well developed design for its time. The trigger spine is 0.9" thick.       TR-FUSIL-D-T . . . $8.99

Trigger Plate Only , French Type 'C' and 'D' Trade Fusil, brass Made for the French Type C and Type D trade fusils, this wax cast brass trigger plate has a double thickness round lug for the tang screw cast into the back surface. Slot is square and crisp, ready to use.       TR-FUSIL-P . . . $12.99

Trigger Plate Only , French Type 'C' and 'D' Trade Fusil, steel Made for the French Type C and Type D trade fusils, this wax cast steel trigger plate has a double thickness round lug for the tang screw cast into the back surface. Slot is square and crisp, ready to use.       TR-FUSIL-P-I . . . $12.99 Closeout

Bullets and Ball-ets for muzzle loading guns Track''s traditional MINIE bullets , named after French Captain Minie, are Civil War era designs to meet NSSA rules. Use a modest load, a 60 grain Service load in .58 caliber. Excess pressure may flare the skirt on exit! Early editions of "Lyman''s Black Powder Handbook" show such bullets in flight. Track''s improved MINIE bullets were developed

Early Trade Lock,flint, right hand, by L&R Early Trade Fowling Gun Flint Lock, by L&R This early trade lock is typical of those made from 1730 through 1770. Popularly used on smooth bore Indian trade guns, simple trade locks were used on English fowlers, the French fusil-de-chasse, and early colonial American longrifles and fowling guns. Gun makers in Europe recognized the American marke

1763 Charleville Musket discontinued, warranty void, no factory parts or support 1763 Charleville French Musket discontinued by Miroku, Japan for Navy Arms , warranty voided, no factory parts or supportStocked in walnut, steel trim, bright .69 caliber smooth bored barrel and lock, marked "CHARLEVILLE" on the lock, this musket has a flat faced lock plate and cock, with chamfered edges.

French Military Arms and Armor in America 1503-1783 by Rene Chartrand A comprehensive guide to the military weapons and armor used in New France. Muskets, Swords, Pistols, Bayonets, Polearms and More! From soldiers to sailors to woodsmen and buccaneers, one of Canada's premier historians tells us the story of how they armed during the Colonial Era and in the American Revolution. Soft Cover, 8-1/2 x 11" format, 215 pa       BOOK-FM-AAA . . . $33.99

Plan drawing , full exact size, with tips for assembly to build our TULLE fusil-de-chasse , French hunting gun Our Tulle fusil-de-chasse kit with 44" octagon-to-round barrel is illustrated in this full size plan drawing. Produced in Tulle (TVLLE), France the fusil de chasse was a popular trade gun for hunter, settlers, and natives, in the settlements in New France. Our plans depict a classic fusil de chasse and incorporate the best features of many survivin       PLAN-TULLE . . . $9.99

French Tulle Fusil-de-Chasse Ramrod Pipes, for 3/8'' rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are shaped, with delicate ringed ends. Designed to accept a 3/8" diameter ramrod as cast, in your choice of brass or iron (steel), for fullstock. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-3/8" length, about 3-1/2" overall, including the skirt. Your cho

French Fusil Ramrod Ripes , for 3/8'' rod, wax cast brass or iron Shown in side view, and top view, these ramrod pipes are barrel shaped, with ringed ends, for 3/8" ramrod, in your choice of brass or iron (steel), for fullstock. Our entry pipe (where rod enters the wood) has an integral skirt. The pipe body is 1-5/8" length, about 3-5/8" overall, including the skirt. Your choice of wax cast brass or steel. Use

Ramrod pipe, brass , entry pipe with skirt, French fusil, for 3/8" ramrod       RP-TYPE-C-E-6-B . . . $18.99

Ramrod pipe, steel , entry pipe with skirt, French fusil, for 3/8" ramrod       RP-TYPE-C-E-6-I . . . $11.99

Ramrod pipe, brass , forward with pin lug, French fusil, for 3/8" ramrod       RP-TYPE-C-F-6-B . . . $16.99

Ramrod pipe, steel , forward with pin lug, French fusil, for 3/8" ramrod       RP-TYPE-C-F-6-I . . . $11.59

Trigger Only , French Type 'C' Trade Fusil, wax cast steel Early Type C fusils were fancier than later Type D fusils. This trigger would be pretty on a flint longrifle too. Notice the curled end.       TR-FUSIL-C-T . . . $8.99

1763 Charleville & 1795 Springfield lock castings New wax cast parts, for the experienced lock maker. Not a kit! The armories of France lead the world in advanced military musket design and production, during the 1700 - 1830 period. So many French musket models and variations were made and tested, even advanced collectors find the distinctions confusing. These parts are apparently exact copies f

Barrel, 20 gauge , 42" octagon-to-round, smooth bored, crowned, threaded for 3/4-16 plug Tapered octagon-to-round 20 gauge smoothbore barrel is made in the U.S.A., exclusively for Track® by Colerain Barrel Company. Our 20 gauge barrel is our most popular octagon-to-round barrel, offered in 36" or 42" lengths. Both sizes are identical, except for length, other lengths may be ordered up to 42" at small extra cost. Track's best 20 gauge 4       BBL-20-42 . . . $259.00

Barrel, 24 gauge , 42" octagon-to-round, smooth bored, crowned, threaded for 3/4-16 plug Tapered octagon-to-round 24 gauge smoothbore barrel, exclusively from Track® Our 24 gauge barrel has the identical outside dimensions as our most popular 20 gauge octagon-to-round barrel. Offered in 42" length. Other lengths may be ordered up to 42" at small extra cost. Track's best 24 gauge 42" barrel exactly fits Track's pre-inlet stocks: Track'       BBL-24-42 . . . $259.00

Barrel, .54 caliber , 42" octagon-to-round, 1-56" twist, round bottom rifled, crowned, threaded for 3/4-16 plug Tapered octagon-to-round .54 caliber rifled barrel, exclusively from Track® Our .54 caliber rifled barrel has the same outside dimensions as our most popular 20 gauge octagon-to-round barrel, offered 42" length. Other lengths may be ordered up to 42" at small extra cost. Track's .54 caliber 42" barrel exactly fits Track's pre-inlet stocks: Track's       BBL-54-42 . . . $269.00

Barrel, .58 caliber , 42" octagon-to-round, 1-66" twist, round bottom rifled, crowned, threaded for 3/4-16 plug Tapered octagon-to-round .58 caliber rifled barrel, exclusively from Track® Our .58 caliber rifled barrel has the same outside dimensions as our most popular 20 gauge octagon-to-round barrel, offered 42" length. Other lengths may be ordered up to 42" at small extra cost. Track's .58 caliber 42" barrel exactly fits Track's pre-inlet stocks: Track's       BBL-58-42 . . . $269.00

Tulle fusil-de-chasse, pre-shaped stock, pre-inlet 42" octagon-to-round barrel, Fusil lock Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offer

Stock, Tulle fusil-de-chasse, pre-shaped, 42" barrel, inlet Fusil lock, plain maple Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offer       STK-CHASE-2-M1 . . . $279.00

Stock, Tulle fusil-de-chasse, pre-shaped, 42" barrel, inlet Fusil lock, fancy maple Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offer       STK-CHASE-2-M3 . . . $320.00

Stock, Tulle fusil-de-chasse, pre-shaped, 42" barrel, inlet Fusil lock, plain walnut Pre-inlet on Allen's patent 5 axis pantograph. Fully shaped, cut for our 42" octagon to round barrel. Pre-inlet for Track's Fusil lock, triggerguard, buttplate, trigger, trigger plate, sideplate, rod pipes, and drilled for a 3/8" rod.Our pattern was refined by Michael Hayes from a original Tulle musket found in Canada. Guns of this style were offer       STK-CHASE-2-W1 . . . $390.00

has been added to your .

---