cock, left, wax cast steel, 1.4" throw, tapped 1/4-28 cock, left, wax cast steel, 1.4" throw, tapped 1/4-28 A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, which great       LOCK-LR-3100-CO . . . $27.50

frizzen, left, wax cast steel, as cast, temper after fitting frizzen, left, wax cast steel, as cast, temper after fitting A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, whic       LOCK-LR-3100-FR . . . $39.00

Mainspring , left, tempered steel, tempered mainspring, left, tempered steel, tempered A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, which greatly simplify       LOCK-LR-3100-MS . . . $39.00

plate, left, wax cast steel, .94" x 5.1", tapped 6-40 plate, left, wax cast steel, .94" x 5.1", tapped 6-40 A fly detent prevents the sear from snagging the half-cock notch when fired. Used with plain or set triggers. Nearly as large as the left Siler lock, it will fit straight or swamped barrels from 3/4" to 1-1/8" octagon at the breech. Notice the "cut away" tumbler and "swing out" link, which great       LOCK-LR-3100-PL . . . $57.00 Closeout

Antique French Pistol , .55 caliber smoothbore, 8-3/8" octagon-to-round barrel, reconverted flintlock, iron trim, walnut, unsigned This unsigned holster pistol appears to French in style. The pistol is stocked in European walnut and trimmed in steel furniture with bone sideplates. The iron furniture has aged to a dark brown patina. The round faced flintlock has been reconverted to flintlock with a modern cock assembly, pan, and frizzen. The octagon-to-round barrel has a silver       AAV-347 . . . $2,459.00

lock, flint , U. S. Model 1803 Harper's Ferry rifle Correctly shaped and marked, copied from an original, this flint lock is precision pre-inlet into our pre-shaped U. S. Model 1803 Rifle stock. The plate is marked with an American Eagle, HARPER'S FERRY and dated 1803 . Neatly assembled, tempered, and tuned by R. E. Davis, this well made lock features the popular internal parts, for long service and       LOCK-1803 . . . $225.00

Brown Bess 1746 ~ Willits lock kit, fully assembled, tested, with tempered springs and parts, not polished 1746 - Willits, Brown Bess Musket Flint Lock Kit This lock kit is now fully assembled , tested for correct function, not polished. These First Model Brown Bess lock parts are cast directly from an original antique lock, by Willits - 1746. Parts are precision CNC machined, tempered, fitted and assembled. Overal length 6.68" by 1.18" tall. The ma       LOCK-BESS-46 . . . $219.99

Chambers' deluxe Siler Flint Lock, by Jim Chambers Said to be the fastest and most reliable “Siler” flint lock ever made, this right hand flint lock is the latest offering from that ingenious lock maker, Mr. Jim Chambers. He has included every trick in this lock. Built on a true Siler lock plate, pan and frizzen, it will fit any mortise pre-inlet for the large Siler lock. Other brands require addit       LOCK-CD-FL-RH . . . $315.00

Colonial American Flint lock , two exposed screw version, by R. E. Davis This large Colonial flint lock is ideal for an American longrifle or fowling gun, of the 1750-1770 era, with it’s large size and pointed tail. Assembled, tuned, and signed by R. E. Davis. Use is on an early longrifle, .50 to .62 caliber, with a simple brass or sliding wooden patchbox. Such “French & Indian War” era rifles are shown in Rifles of Col       LOCK-COLONIAL-F . . . $225.00

Colonial American Flint lock , one exposed screw version, by R. E. Davis This large Colonial flint lock is ideal for an American longrifle or fowling gun, of the 1750-1770 era, with it’s large size and pointed tail. Assembled, tuned, and signed by R. E. Davis. Use is on an early longrifle, .50 to .62 caliber, with a simple brass or sliding wooden patchbox. Such “French & Indian War” era rifles are shown in Rifles of Col       LOCK-COLONIAL-F-1 . . . $225.00

U. S. Common, flint rifle lock, by R.E. Davis Similar to the U.S. Model 1803 lock. The lock plate is unmarked. The plate is nearly identical to our U.S. 1803 Harper's Ferry lock with a slightly different tail. Neatly assembled, tempered, and tuned by R. E. Davis, this well made lock features the popular Siler lock internal parts, for long service and easy maintenance. We stock every spare par       LOCK-COMMON . . . $225.00

Early Christian's Spring, Pennsylvania Flint Lock, by Jim Chambers Christian's Spring Flint Lock An early “Germanic" style flint lock, use it on transitional American longrifles of the 1750-1760 era. Made in the style of the Albrecht (Albright) family, of Christian's Spring, Pennsylvania. Edward Marshall's “Indian Walk" rifle is attributed to the Albrechts. Larger than Siler's large lock, it is a bit more poten       LOCK-CS . . . $320.00

Golden Age era Flint Lock, by Jim Chambers Golden Age era Flint Lock This classic flint lock from America’s "golden age" of longrifles is closely related to the Siler flint lock, and shares many internal parts. This lock plate is longer, front and rear, and features a frizzen spring with fancy finial, mounted with an inside screw. The graceful gooseneck cock is a bit taller than the larg       LOCK-GA-FR . . . $320.00

Germanic Jaeger Rifle Flint Lock, by R. E. Davis Co. This nice large flint lock is distinctly “Germanic” style for use on transitional American longrifles of the 1750-1760 era. This lock is made for Track, by the R. E. Davis Company. Intended for use on “transitional” longrifles, so-called because they fit midway between the early short barreled “Jaeger” hunting rifles, and the classic longrifles we       LOCK-JAEGER . . . $225.00

L&R's RPL-02-F Flint Lock to upgrade the CVA or Traditions Hawken Rifle , right hand only, made in the USA, by L&R Lock Company This flint lock will replace the large flint lock on the CVA or Traditions Hawken Rifle, from Spain. Overall length 4.98” x 0.98” width. Right hand only. NOTE: this lock wll NOT fit the Traditions Woodsman or Traditions St. Louis Hawken. See the No. 7 RPL lock for those rifles. This lock has thicker stronger internal springs and parts than the Con       LOCK-LR-02-F . . . $270.00

L&R's RPL-07-F Flint Lock to upgrade the Traditions Hawken Woodsman or Buckskinner Rifle , right hand only, made in the USA, by L&R Lock Company This flint lock will replace the large flint lock on the Hawken Woodsman or Buckskinner Rifle, from Spain. Note the curve on the lower edge of the plate vs. the standard Hawken lock. Overall length 5-1/32” x 1-1/32” width. Right hand only. This lock has thicker stronger internal springs and parts than the Traditions lock. It requires deepening the       LOCK-LR-07-F . . . $270.00

American Classic longrifle flint lock , right hand, by L&R American Classic longrifle flint lock, right hand, by L&R New competition for the Siler lock, L&R’s new “Germanic” lock is for use on classic American longrifles of the 1760-1800 era. It is made to fit large Siler lock mortise. The cam action angle of the tumbler engages the mainspring. This really speeds lock time. Turned bearing surfaces on th       LOCK-LR-2100 . . . $245.00

American Early Classic longrifle flint lock, no pan bridle, right hand, by L&R American Early Classic right longrifle Flint Lock, by L&R New competition for the Siler lock, L&R’s new “Germanic” lock is for use on classic American longrifles of the 1760-1800 era. It is made to fit large Siler lock mortise. The cam action angle of the tumbler engages the mainspring. This really speeds lock time. Turned bearing surfaces on th       LOCK-LR-2150 . . . $245.00

American Classic left longrifle Flint Lock, by L&R American Classic left longrifle Flint Lock, by L&R New competition for the Siler lock, L&R’s new “Germanic” lock is for use on classic American longrifles of the 1760-1800 era. It is made to fit large Siler lock mortise. The cam action angle of the tumbler engages the mainspring. This really speeds lock time. Turned bearing surfaces on the tumbl       LOCK-LR-2175 . . . $245.00

American Early Classic left longrifle Flint Lock, by L&R American Early Classic left longrifle Flint Lock, by L&R New competition for the Siler lock, L&R’s new “Germanic” lock is for use on classic American longrifles of the 1760-1800 era. It is made to fit large Siler lock mortise. The cam action angle of the tumbler engages the mainspring. This really speeds lock time. Turned bearing surfaces on the       LOCK-LR-2185 . . . $245.00

Bedford County right hand, flint lock, by L&R Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l       LOCK-LR-BED-F . . . $245.00

Golden Age Flint Lock , for gunmakers, assembled with oversize plate Gunmakers flint lock is a Jim Chambers Golden Age flint lock, with an oversize plate. This lock is assembled and tuned. Working parts are fitted as necessary for best action and minimum friction. The oversize plate can be shaped to your custom design. Evidence of the lock maker's skill is obvious in the tight fit of the pan, internal parts, and the       LOCK-OG-FL-RH . . . $320.00

Siler Flint Lock Kit , for gunmakers Gunmakers flintlock kit is a Siler flint kit, with an oversize plate.If you are familiar with the internal workings of flintlocks, our Siler kit can be assembled into a fine lock. All holes to be drilled in the plate are spotted. A drill guide is included to aid you in accurately locating holes. Springs are hardened and tempered. Kits come with ins       LOCK-OS-FK-RH . . . $220.00

Siler Flint Lock , for gunmakers, assembled with oversize plate Gunmakers flint lock is a Siler flint lock, with an oversize plate. This lock is assembled and tuned. Working parts are fitted as necessary for best action and minimum friction. The oversize plate can be shaped to to your custom design. Evidence of the lock maker’s skill is obvious in the tight fit of the pan, internal parts, and the smooth action.       LOCK-OS-FL-RH . . . $320.00

Siler large left Flint Lock Kit, unassembled Siler large left Flint Lock Kit Our left Siler flint lock kit matches our right Siler flint lock kit. Siler's left lock kit is made in this large rifle size, only. If you are familiar with the internal workings of flint locks, you can assemble our Siler kit, and tune it to be a fine sparking lock. All holes to be drilled in the plate are spotted       LOCK-SL-FK-LH . . . $220.00

has been added to your .

---