Flint Hawken 1" slant faced breech & tang, 3/4-16 thread This well made slant faced flint plug and tang is threaded 3/4-16 with .625" thread journal engagement for strength. The powder chamber is drilled .375" diameter, over one inch deep, to the center of the octagon extension. The tang sweeps up to the wood, at both rear corners. Ideally suited for use with L&R's #LOCK-LR-900 right flintlock, or #LOCK-       PLUG-LRF-16-3 . . . $110.00

Kit Carson's Hawken 1" slant breech & tang, 3/4-16 thread Our popular Kit Carson's Hawken right hand plug matches our left plug. Annealed tang may be bent cold. Made with .612" deep thread engagement, with a direct drilled ignition hole. Pre-inlet into our Kit Carson's Hawken stock. Threaded 3/4-16 for 1" octagon barrel. Apply anti-sieze compound to threads, before installation. We recommend Birchwood Cas       PLUG-RL-16-3 . . . $79.99

Kit Carson's Hawken 1" Slant Breech & Tang, left hand, 3/4-16 thread Our popular Kit Carson's Hawken left hand plug matches our right plug. Annealed tang may be bent cold. Made with .550" deep thread engagement, with a direct drilled ignition hole. Pre-inlet into our left hand Kit Carson's Hawken stock. Threaded 3/4-16 for 1" octagon barrel. Apply anti-seize compound to threads, before installation. We recommend Bir       PLUG-LH-16-3 . . . $79.99

Jim Bridger's Hawken 1-1/8" breech & tang , 3/4-16 thread This 1-1/8" Hawken plug was designed by Green River Rifle Works. The tang may be bent cold. X-ray inspected for internal flaws. The short .550" thread journal allows a strong engagement and a direct drilled ignition hole. We recommend using our Jim Bridger's Hawken lock with this plug. Pre-inlet into our Jim Bridger's Hawken stock, this is our firs       PLUG-JB-18-3 . . . $79.99

Stock, Thompson Center halfstock , pre shaped, pre-inlet, 15/16" barrel, Thompson Center lock, plain maple Our halfstock for your T/C Hawken rifle or kit is cut for for the standard 15/16” barrel found on .45 or .50 caliber factory assembled Thompson Center Hawken Rifles. In addition to the barrel, the tang, lock, double set triggers, and oval inlays are pre-inlet. This extra long stock may be cut to fit your buttplate, or select one of our steel buttpl       STK-TCH-15-M1 . . . $175.00

Stock, Thompson Center halfstock , pre shaped, pre-inlet, 15/16" barrel, Thompson Center lock, fancy maple Our halfstock for your T/C Hawken rifle or kit is cut for for the standard 15/16” barrel found on .45 or .50 caliber factory assembled Thompson Center Hawken Rifles. In addition to the barrel, the tang, lock, double set triggers, and oval inlays are pre-inlet. This extra long stock may be cut to fit your buttplate, or select one of our steel buttpl       STK-TCH-15-M3 . . . $249.00

stock, Jim Bridger Hawken , pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, plain maple Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our wax cast Jim Bridg       STK-JB-17-M1 . . . $235.00

stock, Jim Bridger Hawken , pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, fancy maple Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our wax cast Jim Bridg       STK-JB-17-M3 . . . $290.00

stock, Jim Bridger Hawken , pre-inlet, 1-1/8" tapered barrel, Jim Bridger lock, extra fancy maple Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our wax cast Jim Bridg       STK-JB-17-M4 . . . $350.00

Jim Bridger Hawken halfstock , pre shaped stock, pre-inlet, 1-1/8" straight or tapered octagon barrel, Jim Bridger lock Pre-inlet and shaped on Allen’s Patent five axis precision pantograph. Green River Rifle Works made our master pattern, Michael Hayes refined and perfected our working pattern. We offer stocks cut for a 1-1/8” straight or 1-1/8" tapered octagon barrel. Trigger reach is 13-3/4”, drop is 4” from the line of sights, butt end is 5 x 1-1/4”, cut for our

Stock, Thompson Center , fullstock pre shaped, pre-inlet, 1" barrel, Thompson Center lock, plain maple Convert your Thompson Center Hawken or Renegade rifle or kit to a fullstock, using all your existing parts and this new fullstock. Be sure to order an additional wedge key and underlug, if using wedge keys to retain the barrel. We recommend using two of our thinner #Key-58-I and two #UL-104-A lug staples for this fullstock conversion. Pre-inlet for       STK-TCF-16-M3 . . . $329.00

Build Track's J. P. Beck Lebanon Township parts set with "B" or "C" profile, 44" swamped barrel, cut for sliding wood patchbox Price: starting at $1,256.59 Build Track's John Philip Beck Lebanon Township, Lancaster, Pennsylvania, 44" swamped barrel, traditional brass or iron trim, plain, or fancy maple stock with sliding wood patchbox We offer these fine Lebanon Township, Lancaster County style parts, modeled after the work of John Philip Beck. Lebanon township is located just to the north of Lancas

Hawken fullstock , pre shaped stock, pre-inlet, 1" octagon, 42" barrel, L&R late English lock Shaped and pre-inlet for, L&R right hand late English lock, L&R Hawken double set triggers, and 1" flint hooked breech, this Hawken fullstock is modeled after the early work of Jacob and Samuel Hawken, with an early square cheekpiece, not the later beavertail found on halfstocks. We strongly recommend straight grain maple for large bores. Shaped fo

Hawken fullstock , pre shaped stock, pre-inlet, 1" octagon, 42" barrel, L&R late English lock, plain maple Shaped and pre-inlet for, L&R right hand late English lock, L&R Hawken double set triggers, and 1" flint hooked breech, this Hawken fullstock is modeled after the early work of Jacob and Samuel Hawken, with an early square cheekpiece, not the later beavertail found on halfstocks. We strongly recommend straight grain maple for large bores. Shaped fo       STK-EHF-16-M1 . . . $299.00

Hawken fullstock , pre shaped stock, pre-inlet, 1" octagon, 42" barrel, L&R late English lock, fancy maple Shaped and pre-inlet for, L&R right hand late English lock, L&R Hawken double set triggers, and 1" flint hooked breech, this Hawken fullstock is modeled after the early work of Jacob and Samuel Hawken, with an early square cheekpiece, not the later beavertail found on halfstocks. We strongly recommend straight grain maple for large bores. Shaped fo       STK-EHF-16-M3 . . . $330.00

Hawken fullstock , pre shaped stock, pre-inlet, 1" octagon, 42" barrel, L&R late English lock, extra fancy maple Shaped and pre-inlet for, L&R right hand late English lock, L&R Hawken double set triggers, and 1" flint hooked breech, this Hawken fullstock is modeled after the early work of Jacob and Samuel Hawken, with an early square cheekpiece, not the later beavertail found on halfstocks. We strongly recommend straight grain maple for large bores. Shaped fo       STK-EHF-16-M4 . . . $420.00

Stock, H. E. Leman Indian Trade Rifle , pre shaped, 15/16" octagon, 36" barrel, Leman percussion lock, plain maple Modeled after an early fullstock from H. E. Leman's factory in Lancaster, Pennsylvania, our pre-inlet right hand fullstock is cut for a 15/16" straight octagon barrel up to 36" length. Pre-inlet for Track's H.E. Leman percussion lock, H.E. Leman single trigger & trigger plate, triggerguard, and breech plug. Right hand, all have a 7/16" ramrod hole       STK-LEMAN-I-TR-15-M1 . . . $240.00

Stock, H. E. Leman Indian Trade Rifle , pre shaped, 15/16" octagon, 36" barrel, Leman percussion lock, semi-fancy maple Modeled after an early fullstock from H. E. Leman's factory in Lancaster, Pennsylvania, our pre-inlet right hand fullstock is cut for a 15/16" straight octagon barrel up to 36" length. Pre-inlet for Track's H.E. Leman percussion lock, H.E. Leman single trigger & trigger plate, triggerguard, and breech plug. Right hand, all have a 7/16" ramrod hole       STK-LEMAN-I-TR-15-M2 . . . $269.00

Stock, H. E. Leman Indian Trade Rifle , pre shaped, 15/16" octagon, 36" barrel, Leman percussion lock, plain maple Modeled after an early fullstock from H. E. Leman's factory in Lancaster, Pennsylvania, our pre-inlet right hand fullstock is cut for a 15/16" straight octagon barrel up to 36" length. Pre-inlet for Track's H.E. Leman percussion lock, H.E. Leman single trigger & trigger plate, triggerguard, and breech plug. Right hand, all have a 7/16" ramrod hole       STK-LEMAN-I-TR-15-M3 . . . $329.00

Stock, H. E. Leman Indian Trade Rifle , pre shaped, 1" octagon, 36" barrel, Leman percussion lock, plain maple Modeled after an early fullstock from H. E. Leman's factory in Lancaster, Pennsylvania, our pre-inlet right hand fullstock is cut for a 1" straight octagon barrel up to 36" length. Pre-inlet for Track's H.E. Leman percussion lock, H.E. Leman single trigger & trigger plate, triggerguard, and breech plug. Right hand, all have a 7/16" ramrod hole dril       STK-LEMAN-I-TR-16-M1 . . . $240.00

Stock, H. E. Leman Indian Trade Rifle , pre shaped, 1" octagon, 36" barrel, Leman percussion lock, semi-fancy maple Modeled after an early fullstock from H. E. Leman's factory in Lancaster, Pennsylvania, our pre-inlet right hand fullstock is cut for a 1" straight octagon barrel up to 36" length. Pre-inlet for Track's H.E. Leman percussion lock, H.E. Leman single trigger & trigger plate, triggerguard, and breech plug. Right hand, all have a 7/16" ramrod hole dril       STK-LEMAN-I-TR-16-M2 . . . $269.00

Stock, H. E. Leman Indian Trade Rifle , pre shaped, 1" octagon, 36" barrel, Leman percussion lock, fancy maple Modeled after an early fullstock from H. E. Leman's factory in Lancaster, Pennsylvania, our pre-inlet right hand fullstock is cut for a 1" straight octagon barrel up to 36" length. Pre-inlet for Track's H.E. Leman percussion lock, H.E. Leman single trigger & trigger plate, triggerguard, and breech plug. Right hand, all have a 7/16" ramrod hole dril       STK-LEMAN-I-TR-16-M3 . . . $329.00

Stock, H. E. Leman Indian Trade Rifle , pre shaped, 15/16" or 1" octagon, 36" barrel, Track's H.E. Leman percussion lock Modeled after an early fullstock from H. E. Leman's factory in Lancaster, Pennsylvania, our pre-inlet right hand fullstock is cut for a 15/16 or 1" straight octagon barrel up to 36" length. Pre-inlet for Track's H.E. Leman percussion lock, H.E. Leman single trigger & trigger plate, triggerguard, and breech plug. Right hand, all have a 7/16" ramrod

Beavertail Breechplug , 3/4-16 threads for 1" octagon barrel, ideal for Hawken or Southern Mountain rifles Beavertail long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains as well as Hawken rifles. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 1" octagon barrel. It is very slightly oversize at top and bottom flat,       PLUG-BT-16-3 . . . $24.99

H.E. Leman Indian Trade Rifle Breechplug , 3/4-16 threads for 1" octagon barrel This breechplug is tapered and flared with a rounded end. Patterned from a Indian Trade Rifle by H.E. Leman this breech plug is designed to fit a 1" octagon barrel with 3/4-16 threads and is ideal for larger calibers up to .62. The tang is just under 2" in length, and has a through hole located for the tang bolt. Wax cast of malleable 8620 steel, m       PLUG-LEMAN-16-3 . . . $20.99

has been added to your .

---