Flash Guard Screw & Nut for Thompson Center flintlocks, 6-40 thread, inside mounting screw with square nut. The inside mounted frizzen screw on a Thompson Center flintlock requires a longer frizzen screw with a nut to mount a flash guard. Installation of a iron or brass flash guard, protects the shooter next to you from overspray vented from your flash hole. This protection is required at most-re-enactments, where flint shooters may stand and fire volley       LOCK-TC-FGX . . . $6.99

Peep Rear Sight, adjustable, to fit Thompson Center, Lyman Deerstalker, Lyman Trade Rifle, and similar Hawken rifles This blued sight, with two eye disks, is easily installed on Thompson Center, Lyman Deerstalker, Lyman Trade Rifle, and similar Hawken rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Small 5/8" diameter knurled disk is drilled .040". Large 1/2" diameter knurled d       RS-57-SML . . . $122.99

L&R's RPL-03-C Percussion Lock to upgrade Thompson Center's Hawken or Renegade Rifle , right hand only, made in the USA, by L&R Lock Company This new percussion lock will replace the percussion lock on the Thompson Center, Hawes brand imported Hawken, or early Lyman Plains rifle. Overall length is 5" x 1" width. The bridle is threaded 8-32 for factory T/C lock bolt. Right hand only. This lock has thicker stronger internal springs and parts than the Thompson Center Arms lock. It requires       LOCK-LR-03-C . . . $215.00

L&R's RPL-03-F Flint Lock to upgrade Thompson Center's Hawken or Renegade Rifle , right hand only, made in the USA, by L&R Lock Company This new flint lock will replace the flint lock on the Thompson Center, Hawes brand imported Hawken, or early Lyman Plains rifle. We recommend our 3/4" x 7/8" knapped English flints, #FLINT-ENG-6 for use with this lock. Overall length is 5" x 1" width. Bridle is threaded 8-32 for factory T/C lock bolt. Right hand only. This lock has thicker stronge       LOCK-LR-03-F . . . $270.00

Tumbler , wax cast steel, tempered, right hand, Thompson Center Patriot percussion locks Tumbler for Thompson Center's Patriot Pistol, arms pin to plunger       LOCK-TC-PATRIOT-TU . . . $42.95

Used Single Trigger Assembly , for New Englander Shotgun & Rifles, White Mountain Carbine, by Thompson Center A used trigger assembly for a Thompson Center New Englander Shotgun or Rifle, and White Mountain Carbine. Blued steel with some marks from use. This version has the pivot pin in the lower part of the plate. A representative photo shown. Same day shipment, when you click ADD TO CART and complete shopping cart check out. Inspect the item, return it       TR-TC-NE-3-USED . . . $39.99 Closeout

Fly detent , wax cast steel, tempered, Thompson Center Hawken lock Fly detent , wax cast steel, tempered, Thompson Center Hawken lock. Some locks will benefit from stoning the rear corner of the fly detent.       LOCK-TC-FL . . . $13.59

Wedge Key, for Thompson Center New Englander Rifle, blued steel Wedge Key, for use with Thompson Center New Englander. Key is 0.340" wide x 0.1" thick. Length beneath head is 1.46" long. Made in the U.S.A.       KEY-TC-NE . . . $14.99

Wedge Key, for Thompson Center Seneca, Cherokee, or Patriot, blued steel Wedge Key, for use with Thompson Center Seneca, Cherokee, or Patriot pistol. Key is 0.297" wide x 0.090" thick. Length beneath head is 1.26".       KEY-TC-SEN . . . $14.99

Ramrod retaining spring , mounts to rib on Thompson Center rifles Ramrod retaining spring , this small spring mounts to the rib on Thompson Center rifles using a 6-48 screw. Order #LOCK-TC-RRS-X mounting screw, sold seperately. Use this spring on your imported Hawken replica by Investarm, Cabela's, Lyman and other brand names. Same day shipment, when you click ADD TO CART and complete shopping cart check out. In       LOCK-TC-RRS . . . $3.99

Tumbler Screw , 6-40 thread, hammer screw, blued, for all models of Thompson Center locks Tumbler Screw , 6-40 thread, hammer screw, blued, for all models of Thompson Center locks i.e. Hawken, Renegade, New Englander, Seneca, Cherokee, Patriot, etc.       LOCK-TC-TX . . . $4.79

Sideplate , for Thompson Center Renegade Rifle and other models with a steel sideplate, steel Sideplate for a Thompson Center Renegade Rifle and other models that use a steel sideplate. This a replica of the later production sideplate that fits flush with the side panel. 3/4" outside diameter, Counter-bored to accept the factory 1/4" diameter lock bolt head.       SP-TC-H-I . . . $5.99

Rear Sight Elevation Screw , for Thompson Center Hawken, Renegade, and others, 4-40 threads, adjustment clicks, blued steel Rear sight elevation screw, for Thompson Center Hawken, Renegade, and New Englander. 4-40 threads, adjustment clicks, blued steel. Head diameter 0.31". Will not fit the Cherokee, or Seneca rear sights.       RS-TC-EX . . . $5.99

Thompson Center Patridge Front Sight Blank , steel base A wax cast steel front sight, in the style of the Thompson Center, blade front sight. The dovetail fits a 3/8" slot measuring .375" long, .565" wide, and .093" deep. The as-cast blade is .100" thick, standing .400" above the base. Available in steel only.       FS-D37-I . . . $9.79

Ramrod rear tip , 3/8" diameter, brass, 10-32 thread, for Thompson Center and CVA style ramrods, 1-3/8" long Ramrod rear tip, 3/8", brass, 10-32 thread, for Thompson Center and CVA style ramrods       RT-TC-6-10-R-B . . . $3.99

Ramrod rear tip , 3/8" diameter, steel, 10-32 thread, for Thompson Center and CVA style ramrods, 1-3/8" long Ramrod rear tip, 3/8", steel, 10-32 thread, for Thompson Center and CVA style ramrods       RT-TC-6-10-R-I . . . $3.99

Clean Out Screw , 8-32 thread, for Thompson Center rifles with exposed screw, steel This nice quality No. 8-32 slotted headless screw is made for Thompson Center rifles with an exposed clean out screw. Not all production have this screw, as T/C moved it to the back side on later guns. Overall length is 0.22".       SCREW-8-32-TC-COX . . . $2.99

Ramrod rear tip , 3/8" diameter, nickel silver, 10-32 thread, for Thompson Center and CVA style ramrods, 1-3/8" long Ramrod rear tip, 3/8", nickel silver, 10-32 thread, for Thompson Center and CVA style ramrods       RT-TC-6-10-R-S . . . $4.99

Sight base screw , 6-48 thread, for Thompson Center rear sight, steel This nice quality unplated No. 6-48 fillister head screw is made for mounting a Thompson Center rear sight. Overall length is 0.185". This is a popular gunsmithing screw thread size, often used on modern telescope mounts. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this       SCREW-6-48-SB . . . $2.99

Ramrod retaining spring screw , 6-48 thread, mounts spring to rib on Thompson Center rifles Ramrod retaining spring screw , this small 6-48 screw mounts the ramrod retaining spring to the rib on Thompson Center rifles. Same day shipment, when you click ADD TO CART and complete shopping cart check out. Inspect the item, return it for same day refund if not delighted. You will be pleased with your choice. You pay postage, your only risk.       LOCK-TC-RRS-X . . . $2.99

Ramrod pipe, brass , fits Thompson Center Hawken Rifle, brass, for 3/8" ramrod, drilled for 6-48 mounting screw. This new made ramrod pipe fits the Thompson Center Hawken Rifle. Turned from solid brass to accept a 3/8" diameter ramrod. Cross drilled and counter sunk on the inside for mounting with a 6-48 threaded screw, our #SCREW-6-48-TC-ROD-PIPE.       RP-TCH-H-6-B . . . $9.99

Ramrod pipe, steel , fits Thompson Center Renegade Rifle, steel, for 3/8" ramrod, drilled for 6-48 mounting screw. This new made ramrod pipe fits the Thompson Center Renegade Rifle and other models. Turned from solid steel to accept a 3/8" diameter ramrod. Cross drilled and counter sunk on the inside for mounting with a 6-48 threaded screw, our #SCREW-6-48-TC-ROD-PIPE.       RP-TCH-H-6-I . . . $9.99

Machine screw, for Thompson Center underrib, 6-48 thread, unplated, steel This nice quality unplated No. 6-48 screw is made for mounting a Thompson Center underrib. The screw has a overall length of .3" with a .186" diameter head, .055" thick. We offer gunsmith quality carbon steel plug taps, bottom taps, tap drills, and clearance drills, for easy installation of this screw, at low cost.       SCREW-6-48-TC-RIB . . . $2.99

Ramrod forward tip , 5/16" diameter, brass, 8-32 thread, flared concave end for Thompson Center .45 caliber Cherokee or Seneca, 1" long Ramrod forward tip , 5/16" diameter, brass, 8-32 thread, flared concave end for Thompson Center .45 caliber Cherokee or Seneca. The tip has a 1" overall length. The .43" diameter flare could be turned down to allow use in a .36 caliber rifle.       RT-TC-5-8-F-B . . . $3.49

Ramrod forward tip , 5/16" diameter, steel, 8-32 thread, flared concave end for Thompson Center .45 caliber Cherokee or Seneca, 1" long Ramrod forward tip , 5/16" diameter, steel, 8-32 thread, flared concave end for Thompson Center .45 caliber Cherokee or Seneca. The tip has a 1" overall length. The .43" diameter flare could be turned down to allow use in a .36 caliber rifle.       RT-TC-5-8-F-I . . . $3.49

has been added to your .

---