Target Front Sight Blank , brass base The California style front sight, made for target shooting, it gives a square post sight picture. The base has a .375" dovetail, about .750" wide. The base is 0.120" thick to be fitted into a .062 to 0.093' deep dovetail (do not dovetail full depth). The .065" thick blade is .365" tall. Shorten the blade to sight-in, as needed. Same day shipment, w       FS-CA-1B . . . $11.59

Target Front Sight Blank , steel base The California style front sight, made for target shooting, it gives a square post sight picture. The base has a .375" dovetail, about .750" wide. The base is 0.120" thick to be fitted into a .062 to 0.093' deep dovetail (do not dovetail full depth). The .065" thick blade is .365" tall. Shorten the blade to sight-in, as needed. Same day shipment, w       FS-CA-1I . . . $9.79

Creedmoor Vernier Tang Sight , for Long Range competition, with 5" elevation, and windage adjustment This long-range 5" Creedmoor Vernier tang sight is a bit stronger and simpler than our similar sight with pivoting adjustments. This sight does have windage adjustment, built in. You may loosen the eye disk, and slide the eye-disk carriage vane from side-to-side, for windage. Be sure to scribe a zero mark, since the vane is unmarked. Two 10-28 moun       RS-CREED-5-E . . . $95.99

Soule Rear sight, Vernier 3" Tang Sight, for Pedersoli 1874 Sharps & 1885 Highwall rifles Pedersoli's Soule mid range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.26" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye       RS-DP-SOULE-3 . . . $319.99

Soule Rear sight, Vernier 4" Tang Sight, for Pedersoli 1874 Sharps & 1885 Highwall rifles Pedersoli's Soule long range tang sight has three mounting holes in the base, to fit most popular black powder rifles. The front hole is elongated to fit other brands of rifles which may have different hole spacing. The nominal centers are 2.25" apart. It will fit Sharps rifles with a 2.260" hole spacing, and Winchester 2.180" hole spacing. The eye       RS-DP-SOULE-4 . . . $355.00

Virginia Valley Longrifle , .50 caliber, 39-3/4" swamped barrel, round faced flintlock, curly maple, brass, new, unfired, signed by Mike Compton The design of this longrifle appears to have been highly influenced by examples from the Valley of Virgina during the early 1770's. The large round faced English lock is designed for fast, reliable ignition. This rifle has the graceful lines and slender appearance of an antique rifle, and would be ideal for your 18th century Colonial impression. Ne       AAV-443 . . . $3,499.00

Virginia Valley Longrifle , .50 caliber, 39-3/4" swamped barrel, round faced flintlock, curly maple, brass, new, unfired, signed by Mike Compton The design of this longrifle appears to have been highly influenced by examples from the Valley of Virgina during the early 1770's. The large round faced English lock is designed for fast, reliable ignition. This rifle has the graceful lines and slender appearance of an antique rifle, and would be ideal for your 18th century Colonial impression. Ne       AAV-614 . . . $3,499.00

Vernier 5" Long Range Tang Sight , for 1874 Sharps, or 1885 Winchester rifle, complete with Sharps mounting screws, by Davide Pedersoli Blued steel, over 5" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 3 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D       RS-DP-1874 . . . $295.00

Vernier 3" Mid-Range Tang Sight , for 1874 Sharps, or 1885 Winchester rifle, complete with Sharps mounting screws, by Davide Pedersoli Blued steel, over 3" tall, this heavy gauge steel sight is calibrated with an engraved Vernier scale, from 0 to 2 inches elevation, with two windage adjustments. Zero the rifle at the eyepiece. Adjust the calibrated base to compensate for current wind conditions. The eye disk is threaded 5-.5MM to accept Pedersoli manufactured Hadley eye disk #RS-D       RS-DP-1874-MID . . . $285.00

has been added to your .

---