Rear sight , with extra long base, wax cast steel Wax cast steel, not polished, cut this extra long sight base sight to fit nearly any old dovetail. Cut this sight to fit your rifle, do not enlarge the dovetail slot in your barrel. Made in the U.S.A., the dovetail is about 1.250” length, and the base is .510” wide. Height from the bottom of the dovetail to the top of the sight notch is 0.33".       RS-DRU-LCT . . . $10.69

Rear sight, Tall Pennsylvania style for 13/16" or 7/8" octagon barrels, wax cast steel This small version is made for a longrifle with a slim 13/16" or 7/8" octagon barrel. Wax cast steel, this sight has a long base similar to our other Pennsylvania sight #RS-FG-14. However this sight height from the bottom of the dovetail to the top of the sight notch is 0.43", to allow sight-in with a tall front sight, and to reduce mirage and heat       RS-FG-14-T . . . $10.69

Rear sight, Tall Pennsylvania style for 15/16" or 1" octagon barrels, wax cast steel This larger version is made for a longrifle with a 15/16" or 1" octagon barrel. Wax cast steel, this sight has a long base similar to our other Pennsylvania sight #RS-FG-16. However this sight height from the bottom of the dovetail to the top of the sight notch is 0.43", to allow sight-in with a tall front sight, and to reduce mirage and heat glare       RS-FG-16-T . . . $10.69

Rear sight, Traditional longrifle style for 13/16" or 7/8" octagon barrel, wax cast steel Sized to fit a longrifle or Kentucky pistol with a 13/16", or 7/8" octagon barrel. Made in the U.S.A., the dovetail is approximately .610" long, .540" wide, cut to a depth of .050" or this sight is ideal to be fitted in a lifted dovetail. Height from the bottom of the dovetail to the top of the sight notch is 0.27".       RS-G-354-14 . . . $10.69

Rear sight, Traditional longrifle style for 15/16" or 1" octagon barrel, wax cast steel Sized to fit a longrifle with a 15/16", or 1" octagon barrel. Made in the U.S.A., the dovetail is approximately .635" long, .585" wide, cut to a depth of .050" or this sight is ideal to be fitted in a lifted dovetail. Wax cast steel. Height from the bottom of the dovetail to the top of the sight notch is 0.29".       RS-G-354-16 . . . $10.69

Rear sight, feather finial for 13/16" or 7/8" octagon barrels, wax cast steel Wax cast steel, not polished, this sight has a long feather finial at front and is patterned from a antique rifle photographed in Rifles of Colonial America by Dr. George Shumway. Does the feather signify the rifle's swift speed? Undercut base is .750" long, .530" wide, dovetail to .050" deep. Height from the bottom of the dovetail to the top of th       RS-G-403-14 . . . $10.69

Rear sight, feather finial for 15/16" or 1" octagon barrels, wax cast steel Wax cast steel, not polished, this sight has a long feather finial at front and is patterned from a antique rifle photographed in Rifles of Colonial America by Dr. George Shumway. Does the feather signify the rifle's swift speed? Undercut base is .750" long, .585" wide, dovetail to .050" deep. Height from the bottom of the dovetail to the top of th       RS-G-403-16 . . . $10.69

Rear sight, adjustable Hawken style, with five step elevation riser, by L&R This adjustable sight has a .370" long by .580" wide dovetail spaced 3" ahead of the normal location. A great choice for your halfstock Hawken rifle, it works well on 15/16", 1" or 1-1/8" octagon barrels. Height from the top of the barrel to the top of the sight notch is 0.36" in the lowest setting. Not a fixed iron sight, it does not meet N.M.L.R.       RS-HA-5 . . . $60.00

Rear sight, H.E. Leman semi-buckhorn for 15/16", or 1" octagon barrel, wax cast steel Wax cast steel, not polished, this sight is a reproduction of those found on H.E. Leman trade rifles. This sight is suitable for a long rifle with a 15/16", or 1" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., doveta       RS-HL-16 . . . $10.69

Rear sight, folding leaf sight kit, wax cast steel Wax cast steel, both the sight leaf and base have a as-cast 1/16" diameter hole for pinning. Eliminating the need to drill a long hole. Remove the finial for use on a English sporting rifle. Overall length is 2-5/16". Dovetail base is .380" long, .750" wide, and .050" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.4       RS-JAEG-2 . . . $20.99

Rear sight, with decorative front finial, wax cast steel This sight has a classic Germanic appearance and is appropriate for a Jeager hunting rifle, or early Transitional longrifle. The wide violin shaped base will overhang the dovetail, a correct feature on German rifles. Dovetail is .370" long, by .705" wide, dovetail to a depth of .050". Height from the bottom of the dovetail to the top of the sight n       RS-JAEG-3 . . . $10.69

Rear sight, Jaeger high blade, wax cast steel Wax cast steel, not polished, this sight is available with 2 different heights of sight. This sight is smaller than most Jaeger sights, which makes it suitable for smaller octagon barrels. Undercut base is .475" long, .590" wide, .062" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.46".       RS-JAEG-H . . . $10.99

Rear sight, Jaeger low blade, wax cast steel Wax cast steel, not polished, this sight is available with 2 different heights of sight. This sight is smaller than most Jaeger sights, which makes it suitable for smaller octagon barrels. Undercut base is .460" long, .600" wide, .062" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.32".       RS-JAEG-L . . . $10.99

Rear sight , semi-buckhorn for 15/16" or 1" barrels, Kit Carson's Hawken style This medium size version of our Kit Carson's Hawken rifle sight is intended for a barrel up to 1" octagon. Tall, to reduce heat mirage, the center notch is indicated. Wax cast steel, made in the U.S.A., the dovetail is about .370" long and .580" wide. Dovetail to a depth of .050". Height from the bottom of the dovetail to the top of the sight notch       RS-KC-16 . . . $10.69

Rear sight , semi-buckhorn up to 1-1/8" barrels, Jim Bridger's Hawken style This large version of our Kit Carson's Hawken rifle sight is intended for a barrel up to 1-1/8" octagon and is ideal for our Jim Bridger Hawken rifle parts. Tall, to reduce heat mirage, the center notch is indicated. Wax cast steel, made in the U.S.A., the dovetail is about .370" long and .625" wide. Dovetail to a depth of .050". Height from the bo       RS-KC-18 . . . $10.69

Rear sight, low long base longrifle style for 13/16" or 7/8" barrels, wax cast steel Original longrifles were nearly always fitted with "fine" (low) sights, in the mistaken belief that the low sights reduced sighting error. Too low for good target work, use it to restore or replicate an original antique rifle. Wax cast with a 1" dovetail, about .535" wide for use on a 13/16" or 7/8" barrel. Dovetail to a depth of .050". Height from       RS-LLB-14 . . . $10.69

Rear sight, low long base longrifle style for 15/16" or 1" barrels, wax cast steel Original longrifles were nearly always fitted with "fine" (low) sights, in the mistaken belief that the low sights reduced sighting error. Too low for good target work, use it to restore or replicate an original antique rifle. Wax cast with a 1" dovetail, about .575" wide for use on a 15/16" or 1" barrel. Dovetail to a depth of .050". Height from t       RS-LLB-16 . . . $10.69

Rear sight, Tennessee style, wax cast steel Flat topped, with rounded edges, this sight will not cut your hand, nor snag your gun case. Notch is indicated, not cut. Use this on a rifle or pistol with a 13/16" or 7/8" octagon barrel. Wax cast steel, the dovetail is about .735" long as cast, and the sight base is .530" wide. Height from the bottom of the dovetail to the top of the sight notch       RS-PA-194 . . . $10.69

Rear sight, semi-buckhorn style for 13/16", or 7/8" octagon barrel, wax cast steel Wax cast steel, not polished, this traditional style sight is suitable for a long rifle with a 13/16", or 7/8" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., dovetail to a depth of .050", dovetail is .380" long, and       RS-SB1-14 . . . $10.69

Rear sight, semi-buckhorn style for 15/16", or 1" octagon barrel, wax cast steel Wax cast steel, not polished, this traditional style sight is suitable for a long rifle with a 15/16", or 1" octagon barrel. This high sight reduces heat mirage, and tilt minimizes glare. Sight has a notch cast in the blade, which can easily be enlarged if necessary. Made in the U. S. A., dovetail to a depth of .050", dovetail is .375" long, and .5       RS-SB1-16 . . . $10.69

Rear sight, Slim Kentucky Longrifle style, for 13/16" or 7/8" octagon barrel, wax cast steel Wax cast steel, not polished, this 3/8"" high blade is tilted backward, to reduce glare. Intended for longrifle with a 13/16" or 7/8" octagon barrel. Made in the U. S. A., the dovetail is approximately .750" long, base is .540" wide. Dovetail to a depth of .050", or works well in a raised dovetail. Height from the bottom of the dovetail to the top       RS-SK-14 . . . $10.69

Rear sight, Slim Kentucky Longrifle style, for 15/16 or 1" octagon barrel, wax cast steel Wax cast steel, not polished, this 3/8"" high blade is tilted backward, to reduce glare. Intended for longrifle with a 15/16" or 1" octagon barrel. Made in the U. S. A., the dovetail is approximately .750" long, base is .590" wide. Dovetail to a depth of .050", or works well in a raised dovetail. Height from the bottom of the dovetail to the top of       RS-SK-16 . . . $10.69

Rear sight, Poor Boy style, wax cast steel Wax cast steel, this sight is made in the U. S. A. from patterns made by the famous rifle maker, Mr. Louis Smith of Johnson City, Tennessee. Semi-buckhorn style, with a flat surface over the notch area. The dovetail is .640" long, .625" wide, with a simple thumbnail finial. Height from the bottom of the dovetail to the top of the sight notch is 0.3       RS-TOW-1 . . . $8.99

Used Book Winchester Lever Action Repeating Firearms The Models of 1866, 1873 & 1875 by Arthur Pirkle A used book in good condition. Stock photo shown. The most famous long gun in American history is described part-by part, by serial number range. Common parts between the three models are compared. The first reference work on the Lever Action Winchester, and the most complete. Softcover, 5-1/2" x 8-1/2" format, 202 pages. The Table of Contents inc       BOOK-WLARF-USED . . . $12.50 Closeout

The 45-70 Springfield , 5th Edition, Revised and Expanded, a detailed reference guide, by Joe Poyer and Craig Riesch A part-by-part examination of the trapdoor Springfield rifle and carbine, with illustrations showing the variations found within serial number ranges. Parts from various models became mixed, as arms were returned to the arsenal, for repair or upgrade. Learn if your 45-70 Springfield is assembled from the correct as-issued parts. An important refere       BOOK-45-70-S . . . $32.50

has been added to your .

---