T/C Hawken Rifle , .54 caliber, 28" barrel, percussion, walnut stock, brass trim, used, by Thompson Center Arms This .54 caliber Thompson Center Hawken percussion rifle is stocked in American black walnut with brass furniture. The stock, lock, and brass furniture show little use. The 28" straight octagon barrel has a dark gray patina. The bore is bright and has been well maintained. Weight is 8.9 pounds, and with a trigger reach of 14-1/4", the rifle is perf       AAW-518 . . . $549.00

Rear sight , 1770 Lancaster style, wax cast steel Isaac Haines style, ideal for a swamped barrel, this wax cast steel sight has concave bevels on the front three edges, and a flat top. We recommend filing a square notch for use with a blade front sight. The dovetail is about .585" long, with a .535" base about .062" deep. Height from the bottom of the dovetail to the top of the sight notch is 0.29       RS-DRU-1 . . . $8.99

Rear sight , Longrifle style, with skirt over dovetail, wax cast steel This rear sight has a concealed dovetail under a front and rear skirt. It will hide a rough looking slot on a 13/16” or 7/8” octagon barrel. The dovetail is about .385” as cast, it will clean up to a standard .375” dovetail. The base is .550” wide. Height from the bottom of the dovetail to the top of the sight notch is 0.39".       RS-DRU-CT . . . $8.99

Build Track's Jim Bridger's Hawken rifle , right hand, 1-1/8" tapered octagon barrel Price: starting at $1,125.16 Build Track's Jim Bridger's Hawken Rifle kit, 1-1/8" tapered octagon 36" barrel, traditional iron, or fancy brass trim, maple stock Track's very best Jim Bridger's Hawken Rifle parts were selected by the well respected gunmaker, Michael Hayes of Park Rapids, MN, who built the fine rifle with tapered octagon barrel, shown above. Stocked in curly

Rear sight, feather finial for 13/16" or 7/8" octagon barrels, wax cast steel Wax cast steel, not polished, this sight has a long feather finial at front and is patterned from a antique rifle photographed in Rifles of Colonial America by Dr. George Shumway. Does the feather signify the rifle's swift speed? Undercut base is .750" long, .530" wide, dovetail to .050" deep. Height from the bottom of the dovetail to the top of th       RS-G-403-14 . . . $8.99

Rear sight, feather finial for 15/16" or 1" octagon barrels, wax cast steel Wax cast steel, not polished, this sight has a long feather finial at front and is patterned from a antique rifle photographed in Rifles of Colonial America by Dr. George Shumway. Does the feather signify the rifle's swift speed? Undercut base is .750" long, .585" wide, dovetail to .050" deep. Height from the bottom of the dovetail to the top of th       RS-G-403-16 . . . $8.99

Build Track's Hawken fullstock plains rifle , 1" straight octagon barrel Price: starting at $1,143.58 Build Track's fullstock Hawken Rifle kit, 1" octagon 36" barrel, traditional iron, or fancy brass trim, maple or walnut stock Track's best fullstock Hawken Rifle parts were selected by the by noted gunmaker Fred Strom , who built the nice rifle shown above. Stocked in figured tiger stripe maple, this nice rifle is strikingly handsome. Trimmed wi

Set of eight Inserts for Globe Front Sights , for Lyman 17 globe sight Die cut, this set includes: one amber plastic insert, one wide post insert, one narrow post insert, one bead, and four diameters of aperture. Seven inserts are made of blued steel. Made by Lyman, these inserts fit #FS-17 sights, the similar discontinued Thompson Center globe sight, and similar modern target rifle sights that accept inserts.       FS-17-INSERT . . . $21.99

Long Range Hunter Barrel for T/C Hawken Rifle , .50 caliber, 1-28" fast twist for bullet, 15/16" octagon, 28" length, blued, 4.9 lb, percussion, new, by Green Mountain Rifle Barrel Co.. Thompson Center drop-in barrel , .50 caliber with 1-28" twist for a conical Maxi-Ball or Minie-Ball. 15/16" octagon by 28" length. Percussion ignition for a Thompson Center Hawken rifle. The barrel, plug, fiber optic adjustable rear sight, fiber optic front sight, rib, rod pipes, and underlug are blued. Weight is 4.9 pounds. Fully assembled, this       GMT-50-C-TC-28-BX . . . $359.00

Build Track's John & Caleb Vincent, Ohio halfstock rifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $926.81 An 1840 - 1860 vintage Ohio halfstock rifle, in the style of John and Caleb Vincent, signed by talented gunsmith J. Eddie Brown. The highly figured maple stock has been stained to best reveal the stripe and figure. The figure and the reddish undertone combine to make this rifle very appealing to the eye. The classic Vincent style scroll surrounding

Build Track's Colonial Longrifle parts set, with 13/16", 7/8", or 15/16" straight octagon barrel Price: starting at $953.50 These parts have been specially chosen to replicate a fine early longrifle, typical of those made during and after our Revolutionary War. This set is now shown with wax castings which are much easier to clean-up than sand castings. Our default barrel choice is a quality U.S. made straight octagon barrel blank with other manufacturers barrels availa

Build Track's John Armstrong , Maryland longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $1,124.25 Build Track's John Armstrong Maryland longrifle parts set, easy to assemble, up to 42" octagon barrel, traditional brass or iron trim, plain or fancy maple stock Many schools of style exist for Maryland longrifles. The Emmitsburg school turned out many fine rifles thanks to the skills of makers such as John Armstrong, Peter White, and George Nune

Oversize Blade Front Sight , iron Our oversized blade sight has a dovetail .375" long, .645" wide, and .062" deep. The blade stands .400" above the base, and is .093" thick. Wax cast steel. Made in the U.S.A.       FS-FG-39-I . . . $9.79

Globe Front Sight , standard .404" height, 3/8" dovetail, with eight inserts Made by Lyman, this "Ideal" front sight is one of our most popular early cartridge era target sights. All 17's are machined from steel, blued, and have a standard 3/8" dovetail. The sight center is measured from the bottom of the dovetail to the center of the aperture. This is the shortest sight at .404". We have three different taller heights, our       FS-17-AHB . . . $49.59

Globe Front Sight , standard .494" height, 3/8" dovetail, with eight inserts Made by Lyman, this "Ideal" front sight is one of our most popular early cartridge era target sights. All 17's are machined from steel, blued, and have a standard 3/8" dovetail. The sight center is measured from the bottom of the dovetail to the center of the aperture. We have four different heights, the lowest is .404", our most popular .494" for       FS-17-AML . . . $49.59

Globe Front Sight , tall .854" height, 3/8" dovetail, with eight inserts Made by Lyman, this "Ideal" front sight is one of our most popular early cartridge era target sights. All 17's are machined from steel, blued, and have a standard 3/8" dovetail. The sight center is measured from the bottom of the dovetail to the center of the aperture. We have four different heights, our lowest .404", our most popular .494" for hun       FS-17-ATC . . . $49.59

Globe Front Sight , medium .584" height, 3/8" dovetail, with eight inserts Made by Lyman, this "Ideal" front sight is one of our most popular early cartridge era target sights. All 17's are machined from steel, blued, and have a standard 3/8" dovetail. The sight center is measured from the bottom of the dovetail to the center of the aperture. We have four different heights, our lowest .404", our most popular .494" for hun       FS-17-AUG . . . $49.59

Globe Front Sight , standard .464" height, metric dovetail to fit Lyman, eight inserts Made by Lyman, this "Ideal" front sight is one of our most popular early cartridge era target sights. All 17's are machined from blued steel. This special sight has a metric dovetail to fit the Lyman Great Plains rifle, CVA, Traditions, and other imported rifles with a .360" dovetail. The sight height is measured from the bottom of the dovetail to       FS-17-AEU . . . $49.59

Build Track's English Fowling Gun, in traditional brass or iron trim, rifled or smoothbore 42" octagon-to-round barrel Price: starting at $1,084.16 build Track's English Fowling Gun, easy to assemble, 42" octagon-to-round barrel, traditional brass, or iron trim, walnut or maple stock Build a correct replica traditional English fowler or rifle. Choose optional upgrades, including walnut, plain or fancy curly maple; iron or brass furniture with round face L&R Queen Anne flint lock. Track's Eng

Build Track's Bedford percussion longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $984.09 Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l

Tennessee Longrifle , .50 caliber, 41-1/2" barrel, flintlock, cherry, traditional iron trim, double set triggers, used Stocked in cherry, this Tennessee flint lock longrifle is .50 caliber with a 41-1/2" straight octagon barrel. The Dixie Gun Works Ashmore flintlock and barrel are both finished to a dark brown. Assembled from a Dixie Gun Works kit all the stampings on the barrel have been neatly removed. Used, the lock sparks well and the bore has been well maintai       AAW-492 . . .

Build Track's Bedford flintlock longrifle parts set, with 13/16", or 7/8" straight octagon barrel Price: starting at $1,049.80 Studying the longrifles of Bedford County, Pennsylvania, might cause you to imagine that time nearly stopped in Bedford County, or that this region was isolated from the world. How can we explain why these men continued to make Bedford County rifles for over 120 years, much later than we might expect? How can we explain these very odd locks, with l

Build Track's Bucks County flint lock longrifle parts set with 13/16", or 7/8" octagon barrel Price: starting at $1,050.21 Bucks County rifles are considered a distinct style with-in the Lehigh Valley school. Typical features include the drooping buttstock shape, side opening patchbox, long pointed tail on the sideplate, and shaped thumbnails finials on the buttplate and triggerguard. The side opening patchbox while a common feature on Bucks County longrifles, is not u

Build Track's Early Tennessee longrifle kit , L&R Durs Egg percussion lock, traditional iron trim, with 15/16" octagon barrel Price: starting at $944.95 Build Track's Early Tennessee longrifle, easy to assemble rifle kit, 36 or 42" octagon barrel, traditional iron trim, plain or fancy maple stock Build a attractive South Mountain flint longrifle trimmed in iron, and stocked in curly maple. Often referred to as a Tennessee style, this Southern rifle is fitted with a percussion conversion English D

Build Track's Hawken fullstock plains rifle , flintlock, with 1" straight octagon barrel up to 42" in length Price: starting at $1,202.49 Build Track's Early Hawken fullstock rifle kit, 1" octagon barrel, up to 42" barrel, traditional iron trim, with maple stock Track's best early fullstock Hawken Rifle parts were selected by the by noted gunmaker J.E. Brown , who built the nice rifle shown above. Stocked in figured tiger stripe maple, this nice rifle is strikingly handsome. Trimm

has been added to your .

---