Flint Hawken 1" slant faced breech & tang, 3/4-16 thread This well made slant faced flint plug and tang is threaded 3/4-16 with .625" thread journal engagement for strength. The powder chamber is drilled .375" diameter, over one inch deep, to the center of the octagon extension. The tang sweeps up to the wood, at both rear corners. Ideally suited for use with L&R's #LOCK-LR-900 right flintlock, or #LOCK-       PLUG-LRF-16-3 . . . $110.00

Tennessee lollipop Breech Plug , 5/8-18 thread, for 13/16" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 13/16" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to       PLUG-TN-13-5 . . . $24.99

Tennessee lollipop Breech Plug , 9/16-18 thread, for 13/16" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 13/16" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to       PLUG-TN-13-9 . . . $24.99

Tennessee Lollipop Breech Plug , 5/8-18 thread, for 7/8" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 7/8" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to ma       PLUG-TN-14-5 . . . $24.99

Tennessee Lollipop Breech Plug , 9/16-18 thread, for 7/8" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 7/8" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to ma       PLUG-TN-14-9 . . . $24.99

Tennessee lollipop Breech Plug , 5/8-18 thread, for 15/16" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 15/16" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to       PLUG-TN-15-5 . . . $24.99

Tennessee Lollipop Breech Plug , 3/4-16 thread, for 1" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 1" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to matc       PLUG-TN-16-3 . . . $24.99

Tennessee Lollipop Breech Plug , 5/8-18 thread, for 1" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 1" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to matc       PLUG-TN-16-5 . . . $24.99

Our Strongest Loading & Cleaning Rod , 5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken, rigid handle, 10-32 thread Our 29" Creedmoor Rifle Loading and Cleaning Rod is made in the U.S.A. from 5/16" diameter 416 stainless steel. Ideal for heavy duty cleaning, this is our strongest rod for pulling a stuck ball. This cleaning rod includes a brass rod guide-muzzle protector and wood handle. This sturdy cleaning rod is suitable for .32 caliber and the brass guide cen       RAMROD-C-29-10 . . . $33.50

Underrib , milled steel, 24" blank for U. S. Model 1803 Harper's Ferry Rifle This extra deep underrib is made for the U. S. Model 1803 Harper's Ferry Rifle . This milled steel 24" underrib requires trimming to length and final polishing, to remove mill marks, before installation and finishing. It may be used on the U.S. Model 1803 Harper's Ferry Rifle with 33" barrel, or the U.S. Model 1814 Harper's Ferry Rifle with 36" bar       RIB-1803 . . . $45.00

Under Rib , drawn steel, 4-3/4", for 15/16" octagon barrel This drawn steel 4-3/4" underrib smooth and ready for installation, final polishing, and finishing. It will fit a 12" or shorter barrel, assuming a 7-1/4" forend length (4-3/4" + forend length = barrel length). Sometimes soldered to the bottom flat of your 15/16" octagon barrel, we recommend using our Stay-Brite brand solder, to tin the mating sur       RIB-HP . . . $4.95

Under Rib , milled steel, 24", for 13/16" octagon barrel This milled steel 24" underrib requires final polishing, to remove mill marks, before installation and finishing. It will fit a 40" or shorter barrel, assuming a 16" forend length (24" + forend length = barrel length). Sometimes soldered to the bottom flat of your 13/16" octagon barrel, we recommend using our Stay-Brite brand solder, to tin the mat       RIB-NW-13 . . . $45.00

Under Rib , milled steel, 24", for _7/8"_ octagon barrel This milled steel 24" underrib requires final polishing, to remove mill marks, before installation and finishing. It will fit a 40" or shorter barrel, assuming a 16" forend length (24" + forend length = barrel length). Sometimes soldered to the bottom flat of your 7/8" octagon barrel, we recommend using our Stay-Brite brand solder, to tin the matin       RIB-NW-14 . . . $45.00

Under Rib , milled steel, 24", for 15/16" octagon barrel This milled steel 24" underrib requires final polishing, to remove mill marks, before installation and finishing. It will fit a 40" or shorter barrel, assuming a 16" forend length (24" + forend length = barrel length). Sometimes soldered to the bottom flat of your 15/16" octagon barrel, we recommend using our Stay-Brite brand solder, to tin the mat       RIB-NW-15 . . . $45.00

Under Rib , milled steel, 24", for __1" _ octagon barrel This milled steel 24" underrib requires final polishing, to remove mill marks, before installation and finishing. It will fit a 40" or shorter barrel, assuming a 16" forend length (24" + forend length = barrel length). Sometimes soldered to the bottom flat of your 1" octagon barrel, we recommend using our Stay-Brite brand solder, to tin the mating       RIB-NW-16 . . . $45.00

Under Rib , milled steel, 24", for round barrel This milled steel 24" underrib with .2" web thickness requires final polishing, to remove mill marks, before installation and finishing. It will fit a 40" or shorter barrel, assuming a 16" forend length (24" + forend length = barrel length). Usually soldered to the bottom flat of your round barrel, we recommend using our Stay-Brite brand solder, to       RIB-NW-SG . . . $45.00

Under Rib for 13/16" octagon , smooth drawn steel, 20" length, made in the U. S. A. by Track of the Wolf, Inc. This "super smooth" drawn steel 20" under rib is ready for installation, final polishing, and finishing. No draw-filing is required, because this fine steel rib has no mill marks. Polish it with 0000 steel wool. Made in the U.S.A. of 1018 steel, sized to fit a 13/16" octagon barrel exactly, it is ideal for a 32" barrel with a 12" forend, or a 36" b       RIB-TR-13-20 . . . $23.99

Under Rib for 13/16" octagon , smooth drawn steel, 22" length, made in the U. S. A. by Track of the Wolf, Inc. This "super smooth" drawn steel 22" under rib is ready for installation, final polishing, and finishing. No draw-filing is required, because this fine steel rib has no mill marks. Polish it with 0000 steel wool. Made in the U.S.A. of 1018 steel, sized to fit a 13/16" octagon barrel exactly, it is ideal for a 34" barrel with a 12" forend, or a 38" b       RIB-TR-13-22 . . . $26.99

Under Rib for 13/16" octagon , smooth drawn steel, 24" length, made in the U. S. A. by Track of the Wolf, Inc. This "super smooth" drawn steel 24" under rib is ready for installation, final polishing, and finishing. No draw-filing is required, because this fine steel rib has no mill marks. Polish it with 0000 steel wool. Made in the U.S.A. of 1018 steel, sized to fit a 13/16" octagon barrel exactly, it is ideal for a 36" barrel with a 12" forend, or a 40" b       RIB-TR-13-24 . . . $28.99

Under Rib for 13/16" octagon , smooth drawn steel, 30" length, made in the U. S. A. by Track of the Wolf, Inc. This "super smooth" drawn steel 30" under rib is ready for installation, final polishing, and finishing. No draw-filing is required, because this fine steel rib has no mill marks. Polish it with 0000 steel wool. Made in the U.S.A. of 1018 steel, sized to fit a 13/16" octagon barrel exactly, it is ideal for a 42" barrel with a 12" forend, or a 46" b       RIB-TR-13-30 . . . $35.99

Under Rib for 7/8" octagon , smooth drawn steel, 20" length, made in the U. S. A. by Track of the Wolf, Inc. This "super smooth" drawn steel 20" under rib is ready for installation, final polishing, and finishing. No draw-filing is required, because this fine steel rib has no mill marks. Polish it with 0000 steel wool. Made in the U.S.A. of 1018 steel, sized to fit a 7/8" octagon barrel exactly, it is ideal for a 32" barrel with a 12" forend, or a 36" bar       RIB-TR-14-20 . . . $23.99

Under Rib for 7/8" octagon , smooth drawn steel, 22" length, made in the U. S. A. by Track of the Wolf, Inc. This "super smooth" drawn steel 22" under rib is ready for installation, final polishing, and finishing. No draw-filing is required, because this fine steel rib has no mill marks. Polish it with 0000 steel wool. Made in the U.S.A. of 1018 steel, sized to fit a 7/8" octagon barrel exactly, it is ideal for a 34" barrel with a 12" forend, or a 38" bar       RIB-TR-14-22 . . . $26.99

Under Rib for 7/8" octagon , smooth drawn steel, 24" length, made in the U. S. A. by Track of the Wolf, Inc. This "super smooth" drawn steel 24" under rib is ready for installation, final polishing, and finishing. No draw-filing is required, because this fine steel rib has no mill marks. Polish it with 0000 steel wool. Made in the U.S.A. of 1018 steel, sized to fit a 7/8" octagon barrel exactly, it is ideal for a 36" barrel with a 12" forend, or a 40" bar       RIB-TR-14-24 . . . $28.99

Under Rib for 7/8" octagon , smooth drawn steel, 30" length, made in the U. S. A. by Track of the Wolf, Inc. This "super smooth" drawn steel 30" under rib is ready for installation, final polishing, and finishing. No draw-filing is required, because this fine steel rib has no mill marks. Polish it with 0000 steel wool. Made in the U.S.A. of 1018 steel, sized to fit a 7/8" octagon barrel exactly, it is ideal for a 42" barrel with a 12" forend, or a 46" bar       RIB-TR-14-30 . . . $35.99

Under Rib for 15/16" octagon , smooth drawn steel, 20" length, made in the U. S. A. by Track of the Wolf, Inc. This "super smooth" drawn steel 20" under rib is ready for installation, final polishing, and finishing. No draw-filing is required, because this fine steel rib has no mill marks. Polish it with 0000 steel wool. Made in the U.S.A. of 1018 steel, sized to fit a 15/16" octagon barrel exactly, it is ideal for a 32" barrel with a 12" forend, or a 36" b       RIB-TR-15-20 . . . $23.99

has been added to your .

---