Ramrod Tip with Covered Ball Puller Worm , for 3/8" ramrod , brass base and cover, fancy tapered antique style ball puller screw, with sharp tip of tempered steel This brass base is designed for use on a 3/8" ramrod. It is ideal for use on the hidden end of a tapered rifle, fowler, or shotgun ramrod. You will need to turn the end of the rod down to 5/16" then glue and cross drill and pin the tip in place. The base and knurled cap are .365" diameter, slightly under 3/8" to easily enter a 3/8" ramrod pipe and       RT-CW-6 . . . $10.99

Ramrod Tip with Covered Ball Puller Worm , for 7/16" ramrod , brass base and cover, fancy tapered antique style ball puller screw with sharp tip of tempered steel This brass base is designed for use on a 7/16" ramrod. It is ideal for use on the hidden end of a tapered large bore rifle or shotgun ramrod. You will need to turn the end of the rod down to 3/8" then glue and cross drill and pin the tip in place. The base and knurled cap are .425" diameter, slightly under 7/16" to easily enter a 7/16" ramrod pipe       RT-CW-7 . . . $10.99

Flint Rifle & Musket Tool , hand forged knapping hammer, vent pick, turnscrew, patch worm, and rod extension Copied from an original, this hand-forged flint rifleman's combination tool is hardened and tempered, ideal for the French & Indian War or Revolutionary War re-enactor. Made to serve the Davide Pedersoli Brown Bess or Springfield or Charleville Musket, the forged blade tightens the top jaw screw. You can easily change flints on your Brown Bess flin       TOOL-COMBO . . . $42.59

Adaptors for other thread sizes Musket Ramrod Adaptor,    Adapter for metric steel musket ramrods, fits a ball puller, jag or worm. Available in 10-32 female and 5-.8mm female threads only, to fit the Davide Pedersoli Brown Bess, Charleville, and Enfield muskets. 8-32 to 10-32 Conversion Adaptors,    Our brass adapter will allow you to interchange 8-32 and

Ramrod Tips Shotgun Tulip Tips Brass tulip loading tips. Installs directly on ramrod. Flat end to seat your shotgun wads and cards squarely! Ramrod tips in brass, steel, or selected sizes in nickel silver: A concave end prevents damage to the ball. Threaded 8-32 or 10-32 to accept jags, scrapers, adaptors, worms, or ball pullers.

Adaptors, for other thread sizes Musket Ramrod Adaptor, shown above in the middle Adaptor for metric steel musket ramrods, fots a ball puller, jag or worm. Available in 10-32 threads only, to fit the Brown Bess and Charleville or the Enfield. 8-32 to 10-32 Conversion Adaptors, shown on the far right. Our brass adaptor will allow you to interchange 8-32 and 10-32 jagged tips an

Ramrod Tips Shotgun Tulip Tips Brass tulip loading tips. Installs directly on ramrod. Flat end to seat your shotgun wads and cards squarely! Ramrod tips in brass or steel: A concave end prevents damage to the ball. Threaded 8-32 or 10-32 to accept jags, scrapers, adaptors, worms, or ball pullers.

Ramrod Covered Worm Cap , for 5/16" diameter, a replacement cap for our ramrod tip with tapered antique style screw This brass cap is patterned from antique examples with a fine knurl and three grooves. This knurled brass base cap fits our #RT-CW-5. Made in the U.S.A.       RT-CWC-5 . . . $3.59

Ramrod Covered Worm Cap , for 3/8" diameter, a replacement cap for our ramrod tip with tapered antique style screw This 3/8" brass cap is patterned from antique examples with a fine knurl and three grooves. This knurled brass base cap fits our #RT-CW-6. Made in the U.S.A.       RT-CWC-6 . . . $3.59

Ramrod Covered Worm Cap , for 7/16" diameter, a replacement cap for our ramrod tip with tapered antique style screw This 7/16" brass cap is patterned from antique examples with a fine knurl and three grooves. This knurled brass base cap fits our #RT-CW-7. Made in the U.S.A.       RT-CWC-7 . . . $3.59

Ramrod for Mortimer 12 gauge shotgun by Davide Pedersoli , 3/8" tapered hickory, 34-7/8" lock, Brass tips, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod Ramrod, 34-7/8" hickory, stained brown, tapered, with brass tips, for 12 ga Davide Pedersoli & Co. Mortimer shotgun. The front end is fitted with a correct tulip shaped flared brass tip for pushing wads and cards. The rear end is fitted with a hardened and tempered sharp steel wad worm, concealed under a brass tip. The rear 13-1/4" are tapered to       RAMROD-347-MORTIMER-12-H . . . $34.99

Adapter for rod tip , brass, 10-32 male to 8-32 male Adapter, 10-32 male to 8-32 male, adapts #Worm-US . Worm sold separately. Same day shipment, when you click ADD TO CART and complete shopping cart check out. Inspect the item, return it for same day refund if not delighted. You will be pleased with your choice. You pay postage, your only risk.       SA-10M-8M . . . $3.99

Left Hand Hawken Rifle , .54 caliber, 36" tapered barrel, percussion, walnut, iron trim, used, signed Parry This left Hawken halfstock rifle is stocked in walnut and trimmed in iron furniture. The walnut stock is finished dark and the iron furniture is fire blued. Assembled around a .54 caliber tapered octagon barrel, this plains rifle will be ideal for large game hunting, or silhouette match use. Trigger reach is 14", to fit a 6" or taller shooter. This       AAW-253 . . . $2,699.00

Hawken Rifle , .54 caliber, 34" Rice tapered barrel, R.E. Davis percussion lock, curly maple, iron trim, new, unfired, by M. Sullivan This Hawken halfstock rifle is skillfully fitted and finished by Mike Sullivan . This percussion halfstock rifle is stocked in curly maple, with iron trim, including a patchbox. The famous Mountain Man Mariano Modena had a similar patchbox on his Hawken rifle. Assembled around a .54 caliber Rice tapered octagon barrel, this large caliber plains ri       AAW-381 . . . $4,799.00

Rocky Mountain Hawken Rifle , .54 caliber, 34" barrel, percussion, curly maple, color case hardened iron, used, by Davide Pedersoli This percussion Rocky Mountain Hawken half-stock rifle was manufactured by Davide Pedersoli & Co . The rifle is stocked in curly maple, trimmed in traditional iron furniture with color case hardened finish. This rifle is used with only a few small marks on the stock and finish from firing and leaning. Weighing in at 10.4 pounds the rifle has a tri       AAW-421 . . .

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 8-32 female thread to fit metal ramrod Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 8-32 male thread will fit your metal ramrod end, on military rifle, if it has 8-32 threads. You can easily enlarge the hole and tap it to fit a 12-24 ramrod tip for an 1803 Harper's Ferry Rifle, or other popular metal rod. The extra length will gi       BP-1817-08-F . . . $10.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 8-32 male thread Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 8-32 male thread will fit your ramrod tip. The extra length will give you a better grip on your ramrod. Stuck ball? No powder? Our first technique is to "prime" the bore, feeding a small amount of FFFFg under the nipple or into the vent hole. Firi       BP-1817-08-M . . . $10.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 10-32 female thread to fit metal ramrod Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 10-32 male thread will fit your metal ramrod end, on your Brown Bess, Springfield, Charleville, or Zouave musket, if it has 10-32 threads. You can easily enlarge the hole and tap it to fit a 12-24 ramrod tip for an 1803 Harper's Ferry Rifle, or ot       BP-1817-10-F . . . $12.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 10-32 male thread Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 10-32 male thread will fit your ramrod tip. The extra length will give you a better grip on your ramrod. Stuck ball? No powder? Our first technique is to "prime" the bore, feeding a small amount of FFFFg under the nipple or into the vent hole. Fir       BP-1817-10-M . . . $12.99

U.S. Pattern 1817 Ball Puller , fits any .45 caliber or larger bore, with 12-24 female thread to fit metal ramrod Our U.S. Pattern 1817 musket ball puller is hand forged. Use it in any .45 caliber or larger bore. The 10-32 male thread will fit your metal ramrod end, on your Brown Bess if it has 12-24 threads. The extra length will give you a better grip on your ramrod. Stuck ball? No powder? Our first technique is to "prime" the bore, feeding a small amount of       BP-1817-12-F . . . $12.99

Ramrod for 12 gauge Double Percussion Shotgun by Davide Pedersoli , 9mm brown Delrin nylon, 26-1/2" long. Brass tips, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod. Ramrod for 12 gauge Double Percussion Shotgun by Davide Pedersoli , 9mm brown Delrin nylon, 26-1/2" long. Brass tips, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod. Made to fit a true 12 gauge, later production double guns by Davide Peder       RAMROD-264-DP-12 . . . $30.99

Ramrod for 12 gauge Double Percussion Shotgun by Davide Pedersoli , 9mm stained hickory, 26-1/2" long. Brass tips, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod. Ramrod for 12 gauge Double Percussion Shotgun by Davide Pedersoli , 9mm stained hickory, 26-1/2" long. Brass tips, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod. Made to fit a true 12 gauge, later production double guns by Davide Pedersol       RAMROD-264-DP-12-H . . . $32.99

Ramrod for 13 gauge Double Percussion Shotgun by Davide Pedersoli , 9mm brown nylon, 26-1/2" long. Brass tips, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod. Ramrod for 12 gauge Double Percussion Shotgun by Davide Pedersoli , 9mm brown Delrin nylon, 26-1/2" long. Brass tips, with tempered steel ball puller hidden under the end cap. Made to fit a true 13 gauge, early production double guns by Davide Pedersoli are a true 13 gauge (.710" bore). We also make a 12 gauge ramrod for the later production doub       RAMROD-264-DP-13 . . . $30.99

Ramrod for 13 gauge Double Percussion Shotgun by Davide Pedersoli , 9mm stained hickory, 26-1/2" long. Brass tips, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod. Ramrod for 13 gauge Double Percussion Shotgun by Davide Pedersoli , 9mm stained hickory, 26-1/2" long. Brass tips, with tempered steel ball puller hidden under the end cap. Made to fit a true 13 gauge, early production double guns by Davide Pedersoli are a true 13 gauge (.710" bore). We also make a 12 gauge ramrod for the later production double       RAMROD-264-DP-13-H . . . $32.99

Ramrod for 12 gauge Double Percussion Shotgun by Davide Pedersoli or 12 gauge C.V.A. Percussion Shotgun , 9mm stained hickory, 28-1/8" long. Brass tips, with tempered steel ball puller hidden under the end cap. Made by Track of the Wolf, in Elk River, Minnesota, we make the brass tips and assemble the ramrod. Ramrod for 12 gauge Double Percussion Shotgun by Davide Pedersoli or 12 gauge Connecticut Valley Arms (C.V.A.) Double Percussion Shotgun , 9mm stained hickory, 28-1/8" long. Brass tips, with tempered steel ball puller hidden under the end cap. Made to fit a true 12 gauge, the later production percussion double guns by Davide Pedersoli are a true       RAMROD-281-DP-12-H . . . $32.99

has been added to your .

---