Your search for 'powder flask'
returned
54 results.
|
11 Piece Powder Flask Spout Set , brass, 10-1mm thread to fit most common flasks
A 11 piece set of brass flask spouts for measuring Black Powder or Pyrodex by volume. These spouts have 10-1mm threads and fit most commonly encountered powder flasks from Spain or Italy. Sizes include: 15, 20, 25, 30, 35, 40, 50, 60, 75, 90, and 100 grain volume. Each spout will fit the flasks listed below.
|
|
Flask Spring, for the large replica flask head, from Italy
Our new forged steel replacement spring is made of imported steel, to upgrade your larger Italian flask head. These springs are approximately 1" in diameter. Made to fit the large powder flask head, made by in Italy, by Davide Pedersoli, these may also be hand fitted to the similar flask head by Palmetto Armory. The spring teat may need to be thinn
|
|
British Military Flintlock Rifles 1740-1840 by De Witt Bailey Ph. D.
Historians have always been intrigued by Riflemen and the special weapons that they carried. This fascination even extends to the general public, as can be seen by the popularity of such books and television shows as Sharpe's Rifles. Unfortunately, until now there has been little solid information available about the rifles themselves and which un
|
|
Flask Spring, for smaller replica flasks, from Italy
Our new forged steel replacement spring is made of imported steel, to upgrade Italian flask heads. These springs are approximately 7/8" diameter. Made to fit the smaller pocket size powder flask heads made by in Italy, by Davide Pedersoli. These will normally also fit similar pocket flasks by Palmetto Armory, with minor fitting. The spring teat may
|
|
Sketchbook '56 Spanish Colonial Infantry, 1739-1781 , by Ted Spring
The Spanish were frequent allies of the French, and dominated the Louisiana region, Florida to Mexico, north to St. Louis. Sketches include swords, knives, plug bayonets, the machete, pistols, muskets, flask, cartridge boxes, canteens, cannons, and uniforms. You can replicate many of the items shown, using the ideas, sketches, dimensions, and plans
|
|
|
Sketchbook '56 Spanish Colonial Infantry, 1739-1781 , by Ted Spring, with slightly damaged covers
The Spanish were frequent allies of the French, and dominated the Louisiana region, Florida to Mexico, north to St. Louis. Sketches include swords, knives, plug bayonets, the machete, pistols, muskets, flask, cartridge boxes, canteens, cannons, and uniforms. You can replicate many of the items shown, using the ideas, sketches, dimensions, and plans
|
|
bullets .54 caliber, 475 grain, for 1859 & 1863 Sharps percussion rifles and carbines, unlubricated, pack of 20
bullets .54 caliber, 475 grain, for 1859 & 1863 Sharps percussion rifles and carbines, unlubricated, pack of 20 Sometimes called the Sharps "tie base" bullet, or the Sharps "Christmas tree" bullet, this is a copy of the original U. S. Military bullet for the percussion Sharps rifle and carbine. Loaded into paper cartridges, or sometimes into linen
|
|
A Shining Time - Volume Three, Horse Soldiers, The Dragoons, 1776-1849 , by Ted Spring
Ted Spring's third volume in this series. This volume spans 75 years of the U.S. Cavalry, the golden age of the American Horse Soldier. Covered in great detail are Washington's continental Army Dragoons, the U.S. Light Dragoons, the U.S. Mounted Rangers, and the U.S. regiments of our frontier Dragoon units. Soft cover, 8-1/2 x 11" format, 113 pages
|
|
Nipple primer , brass, for percussion guns
This tiny flask dispenses priming powder directly into the nipple, to clear a mis-fire. It must be filled with very finely granulated black powder. This small flask is 3-5/16" long with a 1/2" diameter. If you do not have FFFFg priming powder available, place one-half teaspoon of FFg or FFFg into a saucer. Press the spoon with your thumb, and gentl
|
|
Flint priming flask, with free flow valve, brass
This brass flask has a free flow valve to easily dispense the amount of priming powder you require. The base has a lanyard ring so it may be attached to a bag to prevent loss. The flask is 5-1/4" with a 1/2" diameter. Holds approximately 135 grains of powder. Made in the U.S.A. Same day shipment, when you click ADD TO CART and complete shopping car
|
|
Flint Priming Valve , dispenses about 1 grain weight of FFFFg priming powder, fits 7/32" hole, solid brass
This tiny brass priming valve has a knurled body, which may be glued to your wood, horn, or antler priming flask. Drill deep enough to hold a quantity of priming powder. The valve spout unscrews, to allow refilling through the brass body using a funnel. Use FFFFg black powder, for priming only. Best quality, made in the USA, this tiny valve squirts
|
|
Powder measure funnel and swivel only, brass
Our brass funnel is fitted with a pinch-band swivel to fit any 1/2" diameter powder measure. Convert your standard measure to our deluxe target grade measure. Funnel fits our #MA-120 powder measures, or any measure or flask with a 1/2" diameter barrel. Installs instantly on any 1/2" diameter measure without spout.
|
|
Flint Lock Priming Valve , dispenses 3 grain weight, fits 19/64" hole, solid brass
Our small brass flint lock priming valve has a knurled body, which may be glued to a 19/64" hole in your wood, horn, or antler priming flask. Drill deep enough to hold a quantity of priming powder. The valve spout unscrews, to allow refilling through the brass body, using a funnel. Use FFFFg black powder, for priming only. Best quality, solid brass
|
|
Brass horn measure valve, pouring spout, large base plug & bushings
This five piece set includes a horn valve (#HVM), pouring spout (#SP-000), small bushing (#HVB), large horn plug (#HPL) and large bushing (#HPB). Our brass horn valve is threaded to accept the pouring spout or our calibrated charger spouts. Our threaded brass bushing simplifies installation of the valve. Simply glue it into your horn's neck, provid
|
|
Brass horn measure valve, pouring spout and small bushing
This three piece set includes a horn valve (#HVM), pouring spout (#SP-000) and bushing (#HVB). Our brass horn valve is threaded to accept the pouring spout or our calibrated charger spouts. Our threaded brass bushing simplifies installation of the valve. Simply glue it into your horn's neck, providing a strong 3/8-24 thread. The bushing fits a 15/3
|
|
Flint Priming Valve , dispenses 3 grain weight, 10-1mm thread fits large flasks, brass
A screw in priming valve for a Colt size flask with 10-1mm threads. The valve is used by removing the flask valve spring, locking the flask open and threading the priming valve into the spout hole. Use FFFFg black powder, for priming only. Best quality, made in the USA, this tiny valve dispenses three grains weight of priming powder, each time the
|
|
Flint Priming Valve , dispenses 3 grain weight, 8-.75mm thread for pocket flasks, brass
A screw in priming valve for a pocket size flask, fits our #FLASK-POCKET and #FLASK-UNUM. The valve is used by removing the flask valve spring, locking the flask open and threading the priming valve into the spout hole. Use FFFFg black powder, for priming only. Best quality, made in the USA, this tiny valve dispenses three grains volume of priming
|
|
Flint priming flask, throws about 3 grains, brass
Brass flasks are available in three styles. Our smallest flask dispenses about 3 grains for rifles or pistols. Our largest flask dispenses 4 grains for rifles, fusils and muskets. Our hunter's flask has a free flow valve. Overall length is 4 inches. Holds approximately 80 grains of powder. Same day shipment, when you click ADD TO CART and complete
|
|
Flint priming flask, throws about 4 grains, brass
Brass flasks are available in three styles. Our smallest flask dispenses about 3 grains for rifles or pistols. Our largest flask dispenses 4 grains for rifles, fusils and muskets. Our hunter's flask has a free flow valve. Overall length is 5-1/2". Holds approximately 230 grains of powder. Same day shipment, when you click ADD TO CART and complete s
|