Breech plug, straight tang , 7/8-14 thread, for 1-1/8" octagon Breech Plug , flint style, straight tang, 7/8-14 thread, for 1-1/8" octagon, made in the USA, milled steel. Tang is about 3-1/8" length. Bend the tang to to match your stock profile, cold, after fitting this plug to your barrel, before drilling the tang screw hole.       PLUG-ST-18-7 . . . $17.99

Breech Plug with integral nipple for early production Thompson Center Scout Carbine, Rifle, or Pistol, fits No. 11 CCI cap. Made in the U.S.A. of 416 stainless steel. Breech Plug with integral nipple, for early production Thompson Center Scout carbine, rifle, or pistol, to fit No. 11 CCI cap. This is the earlier production style and has a much shorter length and does not have the integral vent holes found on the later examples. We do not have a serial number cut-off for the design change. Made in the USA, of 416       PLUG-TC-SCOUT-EP-11 . . . $18.99

Hooked Breech Plug, for Thompson Center Hawken Rifle , percussion, 15/16" octagon, with standard 5/8-18 threads Create a new barrel assembly for your Thompson Center Hawken rifle, or similar imported Hawken rifle by Investarm, Italy. Our hook will match the tang on your Cabela's, Lyman, or Investarm rifle, with very little hand fitting required. It will not fit replica rifles made in Spain. Tapped for a standard 1/4-28 nipple, order #RST-S Thompson Center d       PLUG-TC-15-5 . . . $52.99

Hooked Breech Plug, for Thompson Center Hawken Rifle , percussion, 15/16" octagon, with special 11/16-20 threads Create a new barrel assembly for your Thompson Center Hawken rifle, or similar imported Hawken rifle by Investarm, Italy. Our hook will match the tang on your Cabela's, Lyman, or Investarm rifle, with very little hand fitting required. It will not fit replica rifles made in Spain. Tapped for a standard 1/4-28 nipple, order #RST-S Thompson Center d       PLUG-TC-15-11 . . . $52.99

Tennessee lollipop Breech Plug , 5/8-18 thread, for 13/16" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 13/16" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to       PLUG-TN-13-5 . . . $24.99

Tennessee lollipop Breech Plug , 9/16-18 thread, for 13/16" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 13/16" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to       PLUG-TN-13-9 . . . $24.99

Tennessee Lollipop Breech Plug , 5/8-18 thread, for 7/8" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 7/8" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to ma       PLUG-TN-14-5 . . . $24.99

Tennessee Lollipop Breech Plug , 9/16-18 thread, for 7/8" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 7/8" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to ma       PLUG-TN-14-9 . . . $24.99

Tennessee lollipop Breech Plug , 5/8-18 thread, for 15/16" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 15/16" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to       PLUG-TN-15-5 . . . $24.99

Tennessee Lollipop Breech Plug , 3/4-16 thread, for 1" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 1" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to matc       PLUG-TN-16-3 . . . $24.99

Tennessee Lollipop Breech Plug , 5/8-18 thread, for 1" barrel Long tang breech plugs are found on antique flint and percussion longrifles from Tennessee, Appalachia, and the Southern Mountains. Wax cast of malleable 8620 steel, made in the USA, by Track of the Wolf, this strong plug is made to fit your 1" octagon barrel. It is very slightly oversize at top and bottom flat, to allow draw-file polishing to matc       PLUG-TN-16-5 . . . $24.99

Breech plug, straight tang , 3/4-16 thread, for 15/16" or 1" octagon, .550" journal length Breech Plug , flint style, straight tang, 3/4-16 thread, with .550" journal length, for 15/16" or 1" octagon. Made in the USA, milled steel. Tang is about 3-1/8" length. This special plug with .550" thread length, is pre-cut to the exact length required by our 20 or 24 gauge, and .54, or .58 caliber rifled octagon-to-round barrel. Bend the tang to       PLUG-ST-16-3-R . . . $12.99

Gunsmithing Labor : install breech plug, fitted inside Our gunsmith will install a breech plug we offer, in a barrel we offer, with the front face of the breech plug tightly sealed against the inside shoulder of the breech thread, and the barrel maker's name (if any) indexed to the bottom flat. Threads are lubricated with Birchwood Casey's Choke Tube Lube anti-seize, so the plug may be removed, even af       LABOR-BP . . . $30.00

Long Tang Breech Plug , 5/8-18 thread, for 13/16" or 7/8" barrel Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr       PLUG-LT-14-5 . . . $14.99

Long Tang Breech Plug , 9/16-18 thread, for 13/16" or 7/8" barrel Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr       PLUG-LT-14-9 . . . $14.99

Long Tang Breech Plug , 3/4-16 thread, for 15/16" or 1" barrel Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr       PLUG-LT-16-3 . . . $16.99

Long Tang Breech Plug , 5/8-18 thread, for 15/16" or 1" barrel Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr       PLUG-LT-16-5 . . . $16.99

Long Tang Breech Plug , 3/4-16 thread, for 1-1/8" barrel Our long tangs are malleable. Bend one to match your stock's profile. Tangs may be shortened, shaped, or modified to accept a tang sight. Long tangs are found on Tennessee and Southern Mountain rifles. Tang is about 6-5/8" long. Cold bend the tang to to match your stock profile, after fitting this plug to your barrel. Always bend the tang before dr       PLUG-LT-18-3 . . . $17.99

Thompson Center hooked breech plug , flint, for 1" octagon barrel, special 11/16-20 thread to fit T/C barrel Make a new barrel assembly for your flint lock Thompson Center Hawken, or Renegade rifle. Our hook matches your tang, with very little file fitting required. Thompson Center does not sell their plugs as a spare part, so we offer these nearly identical plugs for your use. Made in the U. S. A. by Green Mountain Barrel Company. We have a limited supp       PLUG-TCF-16-11 . . . $49.99

Thompson Center hooked breech plug , flint, for 15/16" octagon barrel, 11/16-20 thread A Thompson Center style flint breech with 11/16-20 thread to fit T/C factory barrels, or Green Mountain drop in barrels. Our hook matches your tang, with very little file fitting required. Thompson Center does not sell their plugs as a spare part, so we offer these nearly identical plugs for your use. Made in the U. S. A. This is the plug, only. T       PLUG-TC-F-15-11 . . . $49.99

Thompson Center hooked breech plug , flint, for 15/16" octagon barrel, 5/8-18 thread Make a new barrel assembly for your flint lock Thompson Center Hawken rifle. This is the plug, only. Our hook matches your tang, with very little file fitting required. Thompson Center does not sell their plugs as a spare part, so we offer these nearly identical plugs for your use. Made in the U. S. A. Drilled for a powder chamber, you may enlarge       PLUG-TC-F-15-5 . . . $49.99

English Fowler flint 1" octagon hooked breech plug , 3/4-16 thread This English style tang is wax cast of malleable 8620 steel. It may be straightened, or bent cold. Made in 3/4-16 with a .550" thread journal. The overall length of the tang is just over 1-13/16". The groove at the top of the tang resembles those found on British Officer's fusils, and some pre-Revolutionary War era fowling guns. Build your own fli       PLUG-EF-16-3 . . . $43.99

Barrel, .32 caliber , 13/16" octagon, 42", 1-48" twist, 5.5 lb, crowned, 5/8-18 thread for breech plug, made in the U.S.A. Made with pride in the U.S.A. to meet the demands of today's shooters. Our 42" straight octagon barrel blank is cut rifled with six lands and square grooves with a caliber appropriate 1 in 48" twist for a patched round ball. The muzzle is crowned. The breech is threaded 0.500" deep with a 5/8-18 thread for a breech plug. As with any barrel the octa       BBL-32-A-42 . . . $215.00

Barrel, .36 caliber , 13/16" octagon, 42", 1-48" twist, 5.2 lb, crowned, 5/8-18 thread for breech plug, made in the U.S.A. Made with pride in the U.S.A. to meet the demands of today's shooters. Our 42" straight octagon barrel blank is cut rifled with six lands and square grooves with a caliber appropriate 1 in 48" twist for a patched round ball. The muzzle is crowned. The breech is threaded 0.500" deep with a 5/8-18 thread for a breech plug. As with any barrel the octa       BBL-36-A-42 . . . $215.00

has been added to your .

---