Your search for '"Lock Bolt"'
returned
203 results.
|
Sideplate for Bucks County longrifles, wax cast nickel silver
The pointed tail, beveled edges, and a molding at front and tail are similar to the sideplate attributed a Bucks County rifle by John Shuler. Pre cast holes will need to be drilled for clearance to accept a 8-32 or 10-32 lock bolt. Counter-bored for lock bolts with 3/8" flat or round head. Holes spaced for right hand L&R's Classic lock series, #LOC
|
|
Enfield Rifle Lock , circa 1853 Crown P-H mark, unused, excellent
Made for use on an 1853 Enfield Rifle Musket, this new lock has been drilled for two lock bolts, but never tapped, never installed on a replica Enfield three band rifled musket. Probably made after 1979 for a replica of the Enfield Musket issued to the East India Company, the lock is finished to a dark blue. The hammer and lock plate are engraved w
|
|
sideplate , for Hawken Rifle or Plains Rifles , brass
Sideplate for a Hawken or Plains rifle, trade rifle, or pistol. Counterbored for our 3/8" bolt head, the teat points down. Remove the teat for use on English rifles. Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 or 10-32 lock bolt with up to 3/8" diameter head. We provide the 8-32 lock bolt in our longrifle screw sets.
|
|
Sideplate for your Golden Age Longrifle , wax cast brass
This classic Golden Age sideplate is sized to fit a large Siler, or L&R Classic lock. Lock bolts holes are pre cast, drill for clearance to accept a 8-32 or 10-32 lock bolts. Lock bolts can have up to a 1/2" diameter head. Overall length is 4-7/8", height is 31/32", thickness is .090"
|
|
Sideplate for your Golden Age Longrifle , wax cast steel
This classic Golden Age sideplate is sized to fit a large Siler, or L&R Classic lock. Lock bolts holes are pre cast, drill for clearance to accept a 8-32 or 10-32 lock bolts. Lock bolts can have up to a 1/2" diameter head. Overall length is 4-7/8", height is 31/32", thickness is .090"
|
|
Sideplate for your left hand Golden Age Longrifle , wax cast brass
This classic Golden Age sideplate is sized to fit a large Siler, or L&R Classic lock. Lock bolts holes are pre cast, drill for clearance to accept a 8-32 or 10-32 lock bolts. Lock bolts can have up to a 1/2" diameter head. Overall length is 4-7/8", height is 31/32", thickness is .090".
|
|
Sideplate for your left hand Golden Age Longrifle , wax cast steel
This classic Golden Age sideplate is sized to fit a large Siler, or L&R Classic lock. Lock bolts holes are pre cast, drill for clearance to accept a 8-32 or 10-32 lock bolts. Lock bolts can have up to a 1/2" diameter head. Overall length is 4-7/8", height is 31/32", thickness is .090".
|
|
Sideplate for your Golden Age Longrifle , wax cast nickel silver
This classic Golden Age sideplate is sized to fit a large Siler, or L&R Classic lock. Lock bolts holes are pre cast, drill for clearance to accept a 8-32 or 10-32 lock bolts. Lock bolts can have up to a 1/2" diameter head. Overall length is 4-7/8", height is 31/32", thickness is .090"
|
|
sideplate , for fullstock Hawken Rifle or Plains Rifles , brass
Sideplate for a fullstock Hawken or Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Cut from solid brass, made in the U.S.A. Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 or 10-32 lock bolt with up to 3/8" diameter head. We provide the 8-32 lock bolt in our longrifle screw set
|
|
sideplate , for fullstock Hawken Rifle or Plains Rifles , steel
Sideplate for a fullstock Hawken or Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Cut from solid steel, made in the U.S.A. Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 or 10-32 lock bolt with up to 3/8" diameter head. We provide the 8-32 lock bolt in our longrifle screw set
|
|
Sideplate for a Jaeger or Fowler , wax cast brass
A wide early design for a Jaeger, longrifle, or smoothbore fowler. This large sideplate will fit the R.E. Davis Jaeger, or Chambers early Germanic locks among others. Lock bolt holes are cast in place and can be easily drilled for clearance to accept a 8-32 or 10-32 diameter lock bolt. Thickness is .085" Wax cast brass. Overall length is 5-23/64",
|
|
sideplate , for Hawken Rifle or Plains Rifles , brass
Sideplate for a Hawken or Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Remove the teat for use on English rifles. Cut from solid brass, made in the U.S.A. Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 or 10-32 lock bolt with up to 3/8" diameter head. We provide the 8-32 loc
|
|
sideplate , for Hawken Rifle or Plains Rifles , steel
Sideplate for a Hawken or Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Remove the teat for use on English rifles. Cut from steel, made in the U.S.A. Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 or 10-32 lock bolt with up to 3/8" diameter head. We provide the 8-32 lock bolt
|
|
sideplate , for Hawken Rifle or Plains Rifles , nickel silver
Sideplate for a Hawken or Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Remove the teat for use on English rifles. Cut from nickel silver (aka German silver), made in the U.S.A. Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 or 10-32 lock bolt with up to 3/8" diameter head. W
|
|
Sideplate for Hawken and Plains Rifles , brass
Sideplate for a Hawken or Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Remove the teat for use on English rifles. Cut from solid brass, made in the U.S.A. Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 or 10-32 lock bolt with up to 3/8" diameter head. We provide the 8-32 loc
|
|
Sideplate for Hawken and Plains Rifles , iron
Sideplate for a Hawken or Plains rifle, trade rifle, or pistol. Counter-bored for our 3/8" bolt head, the teat points down. Remove the teat for use on English rifles. Cut from solid steel, made in the U.S.A. Counterbored to neatly accept our #BOLT-L-8-F lock bolt, or any 8-32 or 10-32 lock bolt with up to 3/8" diameter head. We provide the 8-32 loc
|