Tiny Tomahawk, 3-1/4" cutting edge, 4140 alloy steel, with 16" tapered hickory handle, made in the USA A miniature tomahawk similar to our popular full size "New Reliable" tomahawk, but much smaller. It accepts our "tiny" hickory handle. Sturdy 4140 wax cast alloy steel blade, it will endure all the abuse small hands can muster. This head weighs 6/10's of a pound. The blade is 3-1/4", measured along the arc. Comes with a unfinished hickory handle. M       TOMAHAWK-TH . . . $50.29

Viking Tomahawk , 4-5/8" cutting edge, 4140 alloy steel, 18" tapered hickory handle, made in the U.S.A. Made with a reinforced eye, after an early original design, this 15-1/2 ounce head has an oversize cutting edge which is tipped upward for maximum advantage. This "cheater" won't pass formal NMLRA match inspection, but is tough to beat in local club "free-for-all" competition. The blade is 4-5/8", measured along the arc. Made in the U.S.A. wax cast       TOMAHAWK-VA . . . $50.29

Double Punch for locating Track's underlug staples Underlug staples are authentic, stronger, easier to install, and they remove less metal than dovetail lugs. Not suitable for thin wall barrels. Staples work well for keys, pins, or supporting a sling swivel. Align our double punch with a center-line drawn on the bottom flat of your octagon barrel. Strike it to prick punch the exact spacing for our       TOOL-105-P . . . $9.99

Staking Tool, for securely staking staples, permanently Underlug staples are authentic,stronger, easier to install, and they remove less metal than dovetail lugs. Not suitable for thin walled barrels. Staples work well for keys, pins, or supporting a sling swivel. Insert one end of our staple into your hole, and seat it with a light hammer blow. Place the semicircular slotted end of this tool around the       TOOL-105-S . . . $9.99

British Issue Musket Tool , forged & tempered imported carbon cutlery steel, pin punch & turnscrews, for your Brown Bess Musket A very useful tool for managing the Brown Bess and similar military muskets. Carry this correct replica tool in your cartridge box our pouch. The British musket tool has a large screwdriver head, for tightening the top-jaw screw on your musket, and a smaller screwdriver head for the lock bolts or any other screws. It also has a pin punch, for dismo       TOOL-BESS . . . $24.59

Gunsmith's Brass Hammer , 4 ounce head, 12" hickory handle made in the USA Our Gunsmith's brass hammer has a 4 ounce brass head, about 3/4" diameter, 2-3/16" long, fitted with a 12" hickory handle. Useful for drifting wedge keys and barrel pins, ideal for fitting dovetail sights and lugs..       TOOL-BH-4 . . . $19.99

Brass Hammer , 8 ounce, 9-1/2" hickory handle, made in the USA Our hammer has an 8 ounce brass head measuirng 1" in diameter and 2-1/8" long. Includes a 9-1/2" long hickory handle. Useful for drifting wedge keys and barrel pins, ideal for installing dovetail sights and lugs..       TOOL-BH-8 . . . $23.99

Flint Rifle & Musket Tool , hand forged knapping hammer, vent pick, turnscrew, patch worm, and rod extension Copied from an original, this hand-forged flint rifleman's combination tool is hardened and tempered, ideal for the French & Indian War or Revolutionary War re-enactor. Made to serve the Davide Pedersoli Brown Bess or Springfield or Charleville Musket, the forged blade tightens the top jaw screw. You can easily change flints on your Brown Bess flin       TOOL-COMBO . . . $42.59

Dovetail Forming Chisel wax cast steel, made in the USA Use our dovetail forming chisel to “persuade" the slot to accept your lug or sight. It raises the metal, rather than removing it. Underlug slots may be half deep, half raised. Or use it to form a raised moulding for your rear sight. Very shallow dovetails in round barrels may be stronger than solder for underlugs. Instruction sheet included. A exam       TOOL-DOVETAIL . . . $15.99

Drum drilling tool , alignment jig, for drilling nipple threads Install a percussion powder drum on your new rifle barrel, and be assured of perfect alignment. Using this drilling jig is very quick and easy. No file fitting is required to index the nipple to correctly engage the hammer. Never use a washer or shim under your powder drum. Install one of our drums and use this tool to locate and install the nipple       TOOL-DRUM . . . $15.99

Drift Punch , knurled brass, for wedge keys and sights. Our knurled brass drift punch was made to allow installing and adjusting dovetail sights, and removing wedge keys from rifles, shotguns, and percussion revolvers, without marking the part. The brass drift is 2-1/2" in overall length, 3/8" in diameter. The blade area is .083" thick and 3/8" wide.       TOOL-KEY-B . . . $5.29

Timothy Pickering's Tool , for flint muskets, the first U. S. issue gun tool, designed by our first U. S. Quartermaster Large size, this tool is made to fit your Brown Bess musket lock, U. S. Springfield musket lock, and the R. E. Davis North West Trade Gun flint lock. Hand forged, ground to fit the lock screws correctly, and tempered, this tool will give a lifetime of service, exactly like the original. This is a replica of the first U. S. issued gun tool, designed       TOOL-PICK-L . . . $13.99

Timothy Pickering's Tool , medium size, for flint rifles & fowling guns, the first U. S. issue gun tool, designed by our first U. S. Quartermaster Medium size, this tool is made to fit your Jim Chamber's Fowling Gun lock, large Siler flint lock, L&R Queen Anne, and the R. E. Davis Jaeger and Fowling gun flint locks. Hand forged, ground to fit the lock screws correctly, and tempered, this tool will give a lifetime of service, exactly like the original. This is a replica of the first U. S. issu       TOOL-PICK-M . . . $13.99

Thomas Pickering's Tool , for flint rifles & pistols, the first U. S. issue gun tool, designed by our first U. S. Quartermaster Small size, this tool is made to fit your Jim Chamber's small Queen Anne pistol lock, small Siler flint lock, smaller L&R Bailes locks, and pistol size flint locks. Hand forged, ground to fit the lock screws correctly, and tempered, this tool will give a lifetime of service, exactly like the original. This is a replica of the first U. S. issued gun       TOOL-PICK-S . . . $13.99

Gunsmith Steel Pin Drifting Set , 7 pieces, by Grace USA Includes seven steel pin drifting tools for commonly encountered pin sizes. Includes a center punch, starter punch, 1/16", 5/64", 3/32", 1/8", and 5/32" diameter punches.       TOOL-PUNCH-7S . . . $34.99

Gunsmith Brass Pin Punch 8 pieces, 1/16" - 5/16", by Grace USA This set of brass pin punches includes a 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 5/16" punch. Use these punches to reduce the risk of marking your part. Plastic storage pouch included with each set.       TOOL-PUNCH-8B . . . $36.99

Oversize Reforming Thread Taps , to repair worn or damaged 1/4-28 threads, set of three Each set contains the three most commonly used taps: .255-28 (+.005), .260-28 (+.010), .265-28 (+.015), over size 1/4-28 taps. These are thread reforming taps. Use these taps, in sequence, to clean up a 1/4-28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thread a new       TOOL-RETAP-SET-3 . . . $41.99

Oversize Reforming Thread Taps , to repair worn or damaged 1/4-28 threads, set of five Each set contains five taps: .255-28 (+.005), .260-28 (+.010), .265-28 (+.015), .270-28 (+.020), .275-28 (+.025) over size 1/4-28 taps. These are thread reforming taps. Use these taps, in sequence, to clean up a 1/4-28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thre       TOOL-RETAP-SET-5 . . . $69.99

Gun Care Screwdriver Set , set of eight, made by Grace, USA Grace USA's top quality gun care screwdriver set. Comes with eight screwdrivers, each hand assembled and custom hollow-ground to fit scope screws, plug screws, guard screws, floor plate screws, sight screws, and many other gun screws. The square-shanked blades are hardened and tempered to R/C 52-56. The handles are turned from Main hardwood with a       TOOL-SD-8 . . . $54.99

.255-28 Reforming Thread Tap , +.005" oversize, for 1/4-28 threads, single tap, best used in sequence Best used in sequence, to clean up a 1/4x28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thread a new hole. Stop when threads are fully restored. Don't enlarge nipple seats unnecessarily. Sturdy hardened steel. Use a tap handle. Properly used, these should last a life       TOOL-TAP-05 . . . $14.99

.260-28 Reforming Thread Tap , +.010" oversize, for 1/4-28 threads, single tap, best used in sequence Best used in sequence, to clean up a 1/4x28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thread a new hole. Stop when threads are fully restored. Don't enlarge nipple seats unnecessarily. Sturdy hardened steel. Use a tap handle. Properly used, these should last a life       TOOL-TAP-10 . . . $14.99

.265-28 Reforming Thread Tap , +.015" oversize, for 1/4-28 threads, single tap, best used in sequence Best used in sequence, to clean up a 1/4x28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thread a new hole. Stop when threads are fully restored. Don't enlarge nipple seats unnecessarily. Sturdy hardened steel. Use a tap handle. Properly used, these should last a life       TOOL-TAP-15 . . . $14.99

.270-28 Reforming Thread Tap , +.020" oversize, for 1/4-28 threads, single tap, best used in sequence Best used in sequence, to clean up a 1/4x28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thread a new hole. Stop when threads are fully restored. Don't enlarge nipple seats unnecessarily. Sturdy hardened steel. Use a tap handle. Properly used, these should last a life       TOOL-TAP-20 . . . $14.99

.275-28 Reforming Thread Tap , +.025" oversize, for 1/4-28 threads, single tap, best used in sequence Best used in sequence, to clean up a 1/4x28 thread. Install one of our matching oversize nipples. Never use a standard nipple in an oversize hole! Never use these taps to thread a new hole. Stop when threads are fully restored. Don't enlarge nipple seats unnecessarily. Sturdy hardened steel. Use a tap handle. Properly used, these should last a life       TOOL-TAP-25 . . . $14.99

Primitive Rifleman's Turn Screw , hand forged tempered steel screwdriver, to fit in a longrifle patchbox Our 'U' shaped Primitive Rifleman's Turn Screw (screwdriver) is hand forged, tempered steel. Sometimes called a "J Tool" or "J-Tool", this popular design was widely used over many decades and centuries. They are shown in #BOOK-GT-V1 "Gun Tools, Volume 1" and #BOOK-GT-V2 "Gun Tools, Volume 2". You may gently cold bend the handle, in a sturdy vise, t       TOOL-TURN-U . . . $8.99

has been added to your .

---