Your search for '文兴宇 文革期间'
returned
5,649 results.
|
Triggerguard, John Phillip Beck Lebanon Style , sand cast nickel silver
Possibly the work of John Phillip Beck, a master longrifle maker, this triggerguard will look fine on your classic "Golden Age" era flint longrifle. Rifles from Lebanon, Lancaster County and similar schools used this design, probably with a decorative single trigger. Overall length is 8-5/16", inside trigger bow is 2-3/16" long, and 7/8" deep.
|
|
Triggerguard, Lancaster County , sand cast brass
This sand cast triggerguard is very similar to our Lancaster County triggerguards, but thinner and later in styling than those shown elsewhere. Brass was most commonly used, but longrifles trimmed in nickel silver, or with mixed brass and nickel silver trim are known. Overall length is 8-5/8", inside trigger bow is 2-1/4" long, and 13/16" deep.
|
|
Triggerguard, Allentown-Bethlehem and Lehigh County , sand cast brass
Made in the style of the early Allentown-Bethlehem and Lehigh County makers. Similar to our #TG-MA-90 triggerguard by Rupp, except decorated with double lines instead of the chevron 'V' pattern. The small bow suggest the use of a single trigger, perhaps with fancy curls. Overall length is 7-15/16", inside trigger bow is 2-1/16" long, and 13/16" dee
|
|
Triggerguard, Berks County , sand cast brass
Similar to our #TG-MA-143 triggerguard, this casting is a bit larger, and it clearly bears the features of the Berks County school of style. Use this on your next replica of a Wolfgang Haga longrifle. Overall length is 9-3/16", inside trigger bow is 2-5/8" long, and 15/16" deep.
|
|
Triggerguard, Berks County , sand cast nickel silver
Similar to our #TG-MA-143 triggerguard, this casting is a bit larger, and it clearly bears the features of the Berks County school of style. Use this on your next replica of a Wolfgang Haga longrifle. Overall length is 9-3/16", inside trigger bow is 2-5/8" long, and 15/16" deep.
|
|
Triggerguard, Reading, Berks County , sand cast brass
Similar to our Reading or Berks County style triggerguards, this guard has an extra long bow, for use with double set triggers. This triggerguard is a nice, handsome casting. Overall length is 8-15/16", inside trigger bow is 2-13/16" long, and 7/8" deep.
|
|
Triggerguard, Reading, Berks County , sand cast nickel silver
Similar to our Reading or Berks County style triggerguards, this guard has an extra long bow, for use with double set triggers. This triggerguard is a nice, handsome casting. Overall length is 8-15/16", inside trigger bow is 2-13/16" long, and 7/8" deep.
|
|
Triggerguard, Half-Stock Plains Rifle , sand cast brass
A nice variation of an early half-stock plains rifle triggerguard. Made for use with a longrifle style double set trigger, this guard is mounted with pins, unlike Hawken triggerguards which screws directly to the triggerplate. Use two steel #Pin-3/32 dowel pins, sold separately. Overall length is 7-11/16", inside trigger bow is 2-7/16" long, and 1-
|
|
Triggerguard, Half-Stock Plains Rifle , sand cast nickel silver
A nice variation of an early half-stock plains rifle triggerguard. Made for use with a longrifle style double set trigger, this guard is mounted with pins, unlike Hawken triggerguards which screws directly to the triggerplate. Use two steel #Pin-3/32 dowel pins, sold separately. Overall length is 7-11/16", inside trigger bow is 2-7/16" long, and 1-
|
|
Triggerguard, Jaeger rifle design , sand cast brass
A nice triggerguard with a flowing design, this casting mixes elements of early longrifle design with certain Germanic Jaeger rifle style. This bow is long enough to permit double set triggers. Overall length is 8-3/4", inside trigger bow is 2-3/8" long, and 7/8" deep.
|
|
Triggerguard, Reading and Berks County Guns , sand cast brass
Similar to triggerguards from Reading or Berks County, this triggerguard has a large bow for use with double set triggers. Wider and earlier than most, the flats echo the design of the octagon barrel. Overall length is 8-1/2", inside trigger bow is 2-3/8" long, and 7/8" deep.
|
|
Triggerguard, Reading and Berks County Guns , sand cast nickel silver
Similar to triggerguards from Reading or Berks County, this triggerguard has a large bow for use with double set triggers. Wider and earlier than most, the flats echo the design of the octagon barrel. Overall length is 8-1/2", inside trigger bow is 2-3/8" long, and 7/8" deep.
|
|
Triggerguard, Reading and Berks County Guns , sand cast brass
Very similar to TG-MA-143-B triggerguard, this design is obviously the work of the famous longrifle maker, Wolfgang Haga. Use tit on Reading or Berks County longrifles. Mount it with two of our #Pin-3/32 dowel pins, through the integral pin lugs. Overall length is 8-13/16", inside trigger bow is 2-1/2" long, and 1-1/16" deep.
|
|
Triggerguard, Reading and Berks County Guns , sand cast nickel silver
Very similar to TG-MA-143-B triggerguard, this design is obviously the work of the famous longrifle maker, Wolfgang Haga. Use tit on Reading or Berks County longrifles. Mount it with two of our #Pin-3/32 dowel pins, through the integral pin lugs. Overall length is 8-13/16", inside trigger bow is 2-1/2" long, and 1-1/16" deep.
|
|
Triggerguard, Hawken Rifle , sand cast brass
Made with a larger, longer grip rail, this sand cast version of the famous Hawken triggerguard has lugs for mounting pins, for use with longrifle style double set triggers. You can modify this guard to mount it with screws, to a long Hawken trigger plate. Overall length is 9-1/8", inside trigger bow is 2-1/4" long, and 1-1/2" deep.
|
|
Triggerguard, Hawken Rifle , sand cast nickel silver
Made with a larger, longer grip rail, this sand cast version of the famous Hawken triggerguard has lugs for mounting pins, for use with longrifle style double set triggers. You can modify this guard to mount it with screws, to a long Hawken trigger plate. Overall length is 9-1/8", inside trigger bow is 2-1/4" long, and 1-1/2" deep.
|
|
Triggerguard, Bedford County , sand cast brass
This long narrow triggerguard is ideal for a full-stock Bedford County longrifle with double set trigger. Notice the extra long bow and decorative notches at each end. In profile, it looks much like earlier Lancaster County guards. Overall length is 9-1/16", inside trigger bow is 2-3/4" long, and 13/16" deep.
|
|
Triggerguard, Lebanon or Lancaster County, sand cast brass
This small casting is possibly a Lebanon, Lancaster County, or similar styled guard. This petite little triggerguard will be perfect for a small-bore game rifle, a lady's rifle or a boy's rifle. Select a nice single trigger, or very closely spaced double set triggers. Overall length is 7-9/16", inside trigger bow is 2" long, and 15/16" deep.
|
|
Triggerguard, Late Ohio Longrifle , sand cast brass
This interesting triggerguard is probably from a late Ohio full-stock longrifle, or similar school of style. It is a bit different from any other we have seen. The large bow invites double set triggers. Overall length is 8-3/8", inside trigger bow is 2-1/2" long, and 7/8" deep.
|
|
Triggerguard, Reading or Berks County , sand cast brass
An extra large Reading or Berks County style sand cast triggerguard with huge trigger bow for widely spaced double set triggers or for cold weather hunting with a gloved finger. This handsome triggerguard is a bit wider and earlier in design than later "classic" longrifle guards. Overall length is 9-9/16", inside trigger bow is 2-7/8" long, and 1-1
|
|
Triggerguard, Bedford County , sand cast nickel silver
This long narrow triggerguard will look fine on your Bedford County or early Ohio full-stock longrifle. Use double set triggers, and mount it using two of our steel dowel pins, through the two pin lugs. Rifles trimmed in a mix of nickel silver and brass were made during this late longrifle era. Overall length is 9-5/32", inside trigger bow is 2-3/8
|
|
Triggerguard, Early Longrifle , wax cast brass
This early triggerguard is ideal for a Jaeger or Transitional longrifle. The unfinished ends can easily be reshaped to many different styles. The front bow lug is ideal for sling swivels. Overall length is 9-5/16", inside trigger bow is 2-3/8" long, and 1" deep.
|
|
Triggerguard, Early Longrifle , wax cast steel
This early triggerguard is ideal for a Jaeger or Transitional longrifle. The unfinished ends can easily be reshaped to many different styles. The front bow lug is ideal for sling swivels. Overall length is 9-5/16", inside trigger bow is 2-3/8" long, and 1" deep.
|
|
Triggerguard, Early Longrifle , wax cast brass
This early longrifle triggerguard has features more typically found on classic American longrifles of the 1750 - 1780 era. The front bow lug us ideal for a swivel. Use this triggerguard on a Andreas Albrecht rifle of Christian Springs, Pennsylvania. Overall length is 8-7/8", inside trigger bow is 2-5/16" long, and 1" deep.
|
|
Triggerguard, Early Longrifle , wax cast steel
This early longrifle triggerguard has features more typically found on classic American longrifles of the 1750 - 1780 era. The front bow lug us ideal for a swivel. Use this triggerguard on a Andreas Albrecht rifle of Christian Springs, Pennsylvania. Overall length is 8-7/8", inside trigger bow is 2-5/16" long, and 1" deep.
|