Tacks, polished plated brass, 1/4" diameter high domed, per 100 Tacks, polished plated brass, 1/4" diameter high domed, per 100. The steel shank is approximately 1/2" long.       TACK-HD-4-B . . . $6.99

Tacks, antiqued plated brass, 3/8" diameter high domed, per 100 Tacks, antiqued plated brass, 3/8" diameter high domed, per 100. The steel shank is approximately 3/8" long.       TACK-HD-6-A . . . $8.59

Tacks, polished plated brass, 3/8" diameter high domed, per 100 Tacks, polished plated brass, 3/8" diameter high domed, per 100. The steel shank is approximately 3/8" long.       TACK-HD-6-B . . . $8.59

Tacks, antiqued plated brass, 1/2" diameter high domed, per 100 Tacks, antiqued plated brass, 1/2" diameter high domed, per 100. The steel shank is approximately 7/16" long.       TACK-HD-8-A . . . $8.99

Tacks, polished plated brass, 1/2" diameter high domed, per 100 Tacks, polished plated brass, 1/2" diameter high domed, per 100. The steel shank is approximately 7/16" long.       TACK-HD-8-B . . . $8.99

Tacks, antiqued plated brass, 5/16" diameter low domed, per 100 Tacks, antiqued plated brass, 5/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-5-A . . . $6.99

Tacks, polished plated brass, 5/16" diameter low domed, per 100 Tacks, polished plated brass, 5/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-5-B . . . $6.99

Tacks, antiqued plated brass, 7/16" diameter low domed, per 100 Tacks, antiqued plated brass, 7/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-7-A . . . $8.99

Tacks, polished plated brass, 7/16" diameter low domed, per 100 Tacks, polished plated brass, 7/16" diameter low domed, per 100. The steel shank is approximately 1/2" long.       TACK-LD-7-B . . . $8.99

Thompson Center tang only , for 15/16" barrel, percussion or flint used with some marks Made by Thompson Center, this tang fits their 15/16" octagon barrel, percussion or flint. Blued steel. Used with some marks, the photo is representative of the design. This is the tang only. Plugs are sold separately. Click ADD TO CART, to order this tang, for same day shipment.       TANG-TC-15-USED . . . $39.99 Closeout

Thompson Center tang only , for 1" barrel, percussion or flint used with some marks Made by Thompson Center, this tang fits their 1" octagon barrel, percussion or flint. Blued steel. Used with some marks, the photo is representative of the design. This is the tang only. Plugs are sold separately. Click ADD TO CART, to order this tang, for same day shipment.       TANG-TC-16-USED . . . $49.99 Closeout

Thompson Center tang only , for New Englander Shogun or Rifle, used with some marks Made by Thompson Center, this tang fits their New Englander Shotgun or Rifle with tapered round barrel. Blued steel. Used with some marks, the photo is representative of the design. This is the tang only. Click ADD TO CART, to order this tang, for same day shipment.       TANG-TC-NE-USED . . . $29.99 Closeout

Taps , high carbon steel, 3-48 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 4-40 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 5-40 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 6-40 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high speed steel, 6-48 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 8-32 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 10-32 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 10-36 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 12-24 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Taps , high carbon steel, 12-28 thread Taper taps have eight to ten threads chamfered to start and cut threads easily, in a through hole, which is open at the bottom. Plug taps have three to five threads chamfered, to cut threads in a through hole, or to start threads in a blind hole, closed at the bottom. Tap Drills are smaller in diameter than the screw shaft to leave enough metal

Tap , 10-28 thread, high carbon steel, taper tap, to start a through hole Tap, high carbon steel, 10-28 thread, tapered tap for easiest threading of a through hole, with seven to eight threads chamfered. Tap Drill: for 10-28 thread, use No. Drill-21 Clearance Drill: for 10-28 thread, use fractional Drill-13/64 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the       TAP-10-28-T . . . $16.99

Tap , 10-32 thread, high carbon steel, bottom tap, to finish a blind hole Tap, high carbon steel, 10-32 thread, bottom tap to finish a blind hole, with one thread chamfered. Tap Drill: for 10-32 thread, use No. Drill-21 Clearance Drill: for 10-32 thread, use fractional Drill-13/64 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from the hardware store, especially wh       TAP-10-32-B . . . $3.99

Tap , 10-32 thread, high carbon steel, plug tap, to start a blind or through hole Tap, high carbon steel, 10-32 thread, plug tap for general threading, or to start a blind hole, with three to five threads chamfered. Tap Drill: for 10-32 thread, use No. Drill-21 Clearance Drill: for 10-32 thread, use fractional Drill-13/64 We recommend high carbon steel taps for gunsmithing. Avoid using common HSS (high speed steel) taps from       TAP-10-32-P . . . $3.99

has been added to your .

---