Your search for 'powder horn'
returned
88 results.
|
Loading Blocks for patched round balls
This is a Primitive Rifleman's ball loading block, shaped like a miniature "bread board". Made of hard maple, it is drilled with six holes, to snugly hold your lubricated patched round balls. Before hunting, grease your patch, center it over a hole, press the ball into the patch, and seat it into the hole using a short starter. Push it until the b
|
|
Powder Horn , small, 4 to 5" long, white, polished
Our smallest powder horn is 4 to 5" long, for priming flint locks, with a classic carved neck. It closely matches our medium or large powder horn. When ordering both a powder horn and priming horn, request a "matching set", and we will select a color matched pair. Creamy white cow horns have always been prized as powder horns. Notice the hand cut f
|
|
Powder Horn Staple, Small , 5/8" wide hand forged iron, with decorative twist
Our small powder horn staples are hand forged iron from 1/16" square stock. Measuring 5/8" wide, with 5/8" long feet. shaped with a decorative twist in the center. Pre-drill the holes using a 1/16" or smaller drill bit. Buy one, or a pair of our hand forged staples for the strap of your next hand made powder horn. We strongly recommend our Recreat
|
|
Powder Horn , medium, 6 to 9" long, white, polished
This medium powder horn is 6 to 9" long, with a classic carved neck. Sometimes called a "hunter's horn" or "day horn", since it carries plenty of powder for one or two days of hunting. Creamy white cow horns have always been prized as powder horns. Notice the hand cut facets of the neck, at the transition from from the white body to the dark neck.
|
|
Powder Horn , large, over 11" long, white, polished
Creamy white cow horns have always been prized as powder horns. This large powder horn is 11 to 14" long, with a classic carved neck. Notice the hand cut facets of the neck, at the transition from from the white body to the dark neck. A deep groove for the leather strap adjoins a raised square ring, followed by three concave rings, and a polished t
|
|
Powder Horn Staple, Large , 7/8" wide hand forged iron, with decorative twist
Our large powder horn staples are hand forged iron from 1/16" square stock. Measuring 7/8" wide, with 7/8" long feet. shaped with a decorative twist in the center. Pre-drill the holes using a 1/16" or smaller drill bit. Buy one, or a pair of our hand forged staples for the strap of your next hand made powder horn. We strongly recommend our Recreat
|
|
Powder Horn , medium, 6 to 9", with antique patina finish
This medium size 6 to 9" powder horn is The antique patina horn has a dark tip, Patina finished to resemble an original antique, this medium size powder horn is 6 to 9" long, with a classic carved neck. Sometimes called a "hunter's horn" or "day horn", it carries plenty of powder for one or two days of hunting. Notice the hand cut facets of the nec
|
|
Powder Horn Kit , medium, polished, unfinished, includes; horn, base, stopper, strap, nails, and instructions, ready to assemble
This horn kit includes a real cow horn which has been cleaned and polished. Horns will be in the 9 to 11" range measured around the outside curve, color will vary, We recommend polishing this horn with lengthwise strokes, using 0000 steel wool or very fine sandpaper, to dull it. The turned wood base plug is turned to an approximate fit and will req
|
|
Powder Horn , large, 11 to 14", with antique patina finish
Patina finished to resemble an original antique, this large powder horn is 11 to 14" long, with a classic carved neck. Notice the hand cut facets of the neck, at the transition from from the white body to the dark neck. A deep groove for the leather strap adjoins a raised square ring, followed by three concave rings, and a polished tapered spout. T
|
|
Powder Horn , 10"-13" length, brass valve with 100 grain spout
This style powder horn is white or mottled in color with a plain neck. The wood base plug is retained by small domed brass tacks and has a turned brass knob for attaching a shoulder strap. The tip is fitted with a brass on/off valve with pour spout and 100 grain volume spout. The spout accepts 10-1mm threaded spouts. Includes a latigo leather shoul
|