Ramrods, for popular replica rifles; CVA, Lyman, Thompson Center, etc. We offer these finished ramrods, made of space-age synthetic material. Strong and flexible, these are almost unbreakable. Smooth and non-abrasive, these ramrods will never wear your muzzle like a fiberglas rod might. Made of sturdy Delrin nylon, we offer several lengths and styles: Replacement Ramrods are made to fit popular rifles: We make versi

Muzzle loading rifle barrels, IBS by Green Mountain for T/C Hawken Green Mountain Interchangeable Rifle Barrels : Order a target ready round ball barrel for your Thompson Center Hawken Rifle. These rifle barrels are completely assembled, with the breech plug, lug, rib, pipes and adjustable sights installed. All barrels are blued, and include a new ramrod. Nipples are included.. Interchangeable 15/16" octagon barr

Bullet Molds, for Minie & Maxi bullets, by Lyman These precision mold blocks are made in the U.S.A. and tend to cost a bit more than other brands. They are nice quality. Special steel alloy mold blocks hold heat, for even casting temperature. Steel blocks almost never wear out, if properly stored. Blocks are made in one size, cut with two cavities for small bullets, or single cavity for large bul

Ramrods, finished to fit popular rifles We offer these finished ramrods, made of space-age synthetic material. Strong and flexible, these are almost unbreakable. Smooth and non-abrasive, these ramrods will never wear your muzzle like a fiberglas rod might. Made of sturdy Delrin nylon, we offer several lengths and styles: Replacement Ramrods are made to fit popular rifles: We make versi

Front Sight , high blade, .062" thick nickel silver, 9mm by 1/16" brass dovetail base for Lyman rifles This front sight has a polished silver blade with brass base. The rounded silver blade is .275" tall by 0.062" wide. The machined brass dovetail base is .354" long, .750" wide, and .062" deep for fitting to Lyman brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail slight       FS-LYMAN-60-HB . . . $11.59

Front Sight , high blade, .062" thick nickel silver, 9mm by 1/16" copper dovetail base for Lyman rifles This front sight has a polished silver blade with copper base. The rounded silver blade is .275" tall by 0.062" wide. The machined brass dovetail base is .354" long, .750" wide, and .062" deep for fitting to Lyman brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail sligh       FS-LYMAN-60-HC . . . $11.59

Front Sight , tall blade, .062" thick nickel silver, 9mm by 1/16" brass dovetail base for Lyman rifles This front sight has a polished silver blade with brass base. The rounded silver blade is .390" tall by 0.062" wide. The machined brass dovetail base is .354" long, .750" wide, and .062" deep for fitting to Lyman brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail slight       FS-LYMAN-60-TB . . . $11.59

Front Sight , tall blade, .062" thick nickel silver, 9mm by 1/16" copper dovetail base for Lyman rifles This front sight has a polished silver blade with copper base. The rounded silver blade is .390" tall by 0.062" wide. The machined brass dovetail base is .354" long, .750" wide, and .062" deep for fitting to Lyman brand rifles. The sight base can be trimmed in width for smaller octagon barrels, allow the sight base to extend past the dovetail sligh       FS-LYMAN-60-TC . . . $11.59

Flush Nipple , 6-.75mm thread, stainless steel, with 1/4" square shank for nipple wrench, with tubing, fits Lyman rifles Made of stainless steel with a 1/4" square lug for installation with a nipple wrench, "O" ring, and a large hole for better flushing action. Nipple end turned for 3/16" tubing, included.       FLUSH-RLP . . . $4.99

Wedge Key, oval head for Lyman Trade Rifle , brass Wedge key oval head for Lyman Trade Rifle, brass. Length under the head 1.44", 0.37" wide, 0.12" thick.       KEY-LYMAN-TRADE-B . . . $10.00

Peep Rear Sight, adjustable, to fit Thompson Center, Lyman Deerstalker, Lyman Trade Rifle, and similar Hawken rifles This blued sight, with two eye disks, is easily installed on Thompson Center, Lyman Deerstalker, Lyman Trade Rifle, and similar Hawken rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. Small 5/8" diameter knurled disk is drilled .040". Large 1/2" diameter knurled d       RS-57-SML . . . $122.99

Ramrod for Lyman Trade Rifle , 3/8" stained hickory, 28-3/4" long. Flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made in the U.S.A. Ramrod for Lyman Trade Rifle , 3/8" stained hickory, 28-3/4" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made in the U.S.A. by Track of the Wolf       RAMROD-286-LYM-H . . . $30.99

Ramrod for Lyman Trade Rifle , 3/8" brown Delrin nylon, 28-3/4" long. Flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made in the U.S.A. Ramrod for Lyman Trade Rifle , 3/8" brown Delrin nylon, 28-3/4" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made in the U.S.A. by Track of the Wolf       RAMROD-286-LYM . . . $26.99

Ramrod for Lyman Trade Rifle , 3/8" brown Delrin nylon, 28-3/4" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .50 caliber cleaning jag. Made in the U.S.A. Ramrod for Lyman Trade Rilfe , 3/8" brown Delrin nylon, 28-3/4" long. Brass tips are threaded 10-32 at rear, with tempered steel ball puller hidden under the .50 caliber cleaning jag. Made in the U.S.A. by Track of the Wolf       RAMROD-286-50 . . . $26.99

Lyman Trade Rifle , .54 caliber, 28" barrel, percussion, walnut, brass trim, used, by Investarms Stocked in imported walnut a crack on the side panel has been repaired on this rifle. This .50 caliber percussion rifle has a 15/16" octagon 28" barrel to give it a modest weight. Trimmed in brass furniture with a large bow single trigger. This rifle was factory assembled. The lock is color case hardened in mottled colors. All brass furniture has a       AAW-352 . . . $459.00

Our Strongest Loading & Cleaning Rod , 5/16" stainless, over 29" long for Lyman Trade Rifle or T/C Hawken, Creedmoor, rigid handle, 10-32 thread Our 29" Creedmoor Rifle Loading and Cleaning Rod is made in the U.S.A. from 5/16" diameter 416 stainless steel. Ideal for heavy duty cleaning, this is our strongest rod for pulling a stuck ball. This cleaning rod includes a brass rod guide-muzzle protector and wood handle. This sturdy cleaning rod is suitable for .32 caliber and the brass guide cen       RAMROD-C-29-10 . . . $33.50

Ramrod for Investarms Great Plains, Gemmer Hawken, Lyman Great Plains Rifle & Hunter by Investarms , 3/8" brown Delrin nylon, 32-1/2" length. Flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made in the U.S.A. Ramrod for Lyman Great Plains Rifle & Hunter , 3/8" brown Delrin nylon, 32-1/2" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Certain early Lyman rifles have an extra-deep ramrod hole, to accept our 33" #RAMROD-330-LYM.. Most Lyman Great Plains Rifles require this 32-1/2" ramrod. Check your rod hole depth to muzzle. This ra       RAMROD-324-LYM . . . $26.99

Ramrod for Investarms Great Plains, Gemmer Hawken, Lyman Great Plains Rifle & Hunter by Investarms , 3/8" stained hickory, 32-1/2" long. Flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made in the U.S.A. Ramrod for Lyman Great Plains Rifle & Hunter , 3/8" stained hickory, 32-1/2" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Certain early Lyman rifles have an extra-deep ramrod hole, to accept our 33" #RAMROD-330-LYM-H.. Most Lyman Great Plains Rifles require this 32-1/2" ramrod. Check your rod hole depth to muzzle. This ramr       RAMROD-324-LYM-H . . . $30.99

Ramrod for older Lyman Great Plains Rifle by Investarms or Green Mountain barrel , 3/8" stained hickory, 33" long. Flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made in the U.S.A. Ramrod for certain Lyman Great Plains Rifles & Green Mountain barrels , 3/8" stained hickory, 33" length, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Certain early Lyman rifles have an extra-deep ramrod hole, to accept this 33" ramrod. Most Lyman Great Plains Rifles require our 32-1/2" ramrod. Check your rod hole depth to muzzl       RAMROD-330-LYM-H . . . $30.99

Ramrod for older Lyman Great Plains Rifle by Investarms or Green Mountain barrel , 3/8" brown Delrin nylon, 33" long. Flared brass tip threaded 8-32 at front, 10-32 thread at rear. Made in the U.S.A. Ramrod for early Lyman Great Plains Rifles & Green Mountain barrels , 3/8" Delrin nylon, 33" long, flared brass tip threaded 8-32 at front, 10-32 thread at rear. Certain early Lyman rifles have an extra-deep ramrod hole, to accept this 33" ramrod. Most Lyman Great Plains Rifles require our 32-1/2" ramrod. Check your rod hole depth to muzzle. Made       RAMROD-330-LYM . . . $26.99

Peep Rear Sight, adjustable, to fit Lyman Great Plains rifle Blued, with two eye disks, adapter plate allows easily installation on Lyman Great Plains rifles. Two mounting screws included. Features 1/4 minute micrometer click adjustments for elevation and windage, quick release slide. The larger 5/8" diameter knurled eye disk is drilled with the smaller .040" aperture for use on bright days. The smaller 1/2"       RS-57-GPR . . . $122.99

Flash Guard Screw & Nut for Investarms: Bridger, Gemmer, Hawken flintlocks, Lyman Great Plains Rifle. 3.5-.6mm thread, inside mounting screw with square nut. The inside mounted frizzen screw on a Investarms produced Lyman Great Plains Rifle flintlock requires a longer frizzen screw with a nut to mount a flash guard. This same lock and screw is used on the Lyman Trade Rifle and Deerstalker, Investarms: Hawken, Bridger Hawken, Gemmer Hawken, and older Cabela's Hawken. Installation of a iron or brass flash       LOCK-GPR-F-FGX . . . $6.99

Ramrod for older Lyman Great Plains Rifle or Green Mountain barrel , 3/8" brown Delrin nylon, 33" long. Brass tip is threaded10-32 at rear, with .50 jag over hidden ball puller. Made in the U.S.A. Ramrod for some Lyman Great Plains Rifles & Green Mountain barrels , 3/8" brown Delrin nylon, 33" long. Brass tip threaded 10-32 at rear, with tempered steel ball puller hidden under the .50 caliber cleaning jag. For Lyman Great Plains Rifle with 33" ramrod, or Green Mountain Barrel with 33" ramrod. Made in the U.S.A. by Track of the Wolf       RAMROD-330-50 . . . $26.99

Ramrod for older Lyman Great Plains Rifle or Green Mountain barrel , 3/8" brown Delrin nylon, 33" long. Brass tip is threaded10-32 at rear, with .54 jag over hidden ball puller. Made in the U.S.A. Ramrod for some Lyman Great Plains Rifles & Green Mountain barrels , 3/8" brown Delrin nylon, 33" long. Brass tip threaded 10-32 at rear, with tempered steel ball puller hidden under the .54 caliber cleaning jag. For Lyman Great Plains Rifle with 33" ramrod, or Green Mountain Barrel with 33" ramrod. Made in the U.S.A. by Track of the Wolf       RAMROD-330-54 . . . $26.99

Screw for Sharps Tang Sight , each, special #10-32 thread for Lyman 1878 Sharps Rifles, .270" diameter head, blued steel to mount Davide Pedersoli 1874 Sharps tang sight. Order two (2) screws! Screw for Sharps Tang Sight , #10-32 thread, blued steel to mount Davide Pedersoli mid or long range 1874 Sharps tang sight to the Lyman 1878 Sharps rifle. These screws have a .270" diameter head for fit Italian manufactured tang sight base. Overall length of .375", and threaded shaft of .265". Two of these screws are required! to mount a tang si       SCREW-SHARPS-DP-S-1878 . . . $4.99

has been added to your .

---